Re: [Open-discuss] SSH Access Issues (2)

Kinson Liu <[email protected]>
Newsgroups gmane.comp.multimedia.helix.general
Message-ID <[email protected]> 
Sander,

We are currently having some system upgrade. It could be the reason why 
the same problem occurs again. We will take a immediate look for you 
once the upgrade is done.

Thanks,

Kinson

Sander Wichers wrote:
> Hi Kinson,
>
> One day later after you got things working again, I'm having the same
> problem...
>
> Can you have another look?
>
> Thanks, Sander
>
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Sander Wichers
> Sent: dinsdag 19 september 2006 21:43
> To: 'Kinson Liu'
> Cc: [email protected]
> Subject: RE: [Open-discuss] SSH Access Issues (2)
>
> Hi Kinson,
>
> Still no luck, I'm now trying using a virtual machine with a linux
> distribution on it. First I've tried copying my cygwin keys to this
> distribution (before updating), this didn't work, so I made some new keys
> and updated my profile. I'll wait for another hour to see if I get these new
> keys working...
>
> Yours, Sander
>
>
> ________________________________
>
> From: Kinson Liu [mailto:[email protected]]
> Sent: dinsdag 19 september 2006 20:41
> To: Sander
> Cc: [email protected]
> Subject: Re: [Open-discuss] SSH Access Issues (2)
>
>
> Hi Sander,
>
> We have updated the ssh keys as you have uploaded. Please check if it still
> not works.
>
> Regards,
>
> Kinson
>
> Sander wrote: 
>
> 	Hi Kinson,
> 	
> 	Thank you for your fast reply and help, I'm afraid it's still not
> working
> 	for me (neither RSA or DSA).
> 	
> 	Hope you can help me further...
> 	
> 	Yours,
> 	
> 	Sander
> 	
> 	
> 	________________________________
> 	
> 	From: Kinson Liu [mailto:[email protected]] 
> 	Sent: maandag 18 september 2006 19:34
> 	To: [email protected]
> 	Cc: [email protected]
> 	Subject: Re: [Open-discuss] SSH Access Issues (2)
> 	
> 	
> 	Hi Wichers,
> 	
> 	It's back, please try again.
> 	
> 	Regards,
> 	
> 	Kinson
> 	
> 	[email protected] wrote: 
> 	
> 		Hi,
> 		
> 		Is there still the issue of the SSH key not updating to the
> CVS
> 	machine?!
> 		Because I've waited more than 5 hours after my subscription,
> like
> 	the manual
> 		stated. And I also had a go with RSA (again waiting at least
> a
> 	couple of
> 		hours) because of the following post:
> 		
> 	
> http://lists.helixcommunity.org/pipermail/open-discuss/2006-August/000863.ht
> 		ml 
> 		
> 		Still no luck...
> 		
> 		I'm running Windows XP with the latest cygwin version and "$
> ssh -v
> 	-v -l
> 		wichers cvs.helixcommunity.org" is giving me the following
> output:
> 		
> 		OpenSSH_4.3p2, OpenSSL 0.9.8b 04 May 2006
> 		debug1: Reading configuration data /home/wichers/.ssh/config
> 		debug1: Applying options for cvs.helixcommunity.org
> 		debug2: ssh_connect: needpriv 0
> 		debug1: Connecting to cvs.helixcommunity.org
> [207.188.25.137] port
> 	22.
> 		debug1: Connection established.
> 		debug2: key_type_from_name: unknown key type '-----BEGIN'
> 		debug2: key_type_from_name: unknown key type '-----END'
> 		debug1: identity file /home/wichers/.ssh/helixid_dsa type 2
> 		debug1: Remote protocol version 1.99, remote software
> version
> 	OpenSSH_3.9p1
> 		debug1: match: OpenSSH_3.9p1 pat OpenSSH_3.*
> 		debug1: Enabling compatibility mode for protocol 2.0
> 		debug1: Local version string SSH-2.0-OpenSSH_4.3
> 		debug2: fd 3 setting O_NONBLOCK
> 		debug1: SSH2_MSG_KEXINIT sent
> 		debug1: SSH2_MSG_KEXINIT received
> 		debug2: kex_parse_kexinit:
> 		
> 	
> diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellma
> 		n-group1-sha1
> 		debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
> 		debug2: kex_parse_kexinit:
> 		
> 	
> aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,a
> 		
> 	
> es192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes25
> 		6-ctr
> 		debug2: kex_parse_kexinit:
> 		
> 	
> aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,a
> 		
> 	
> es192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes25
> 		6-ctr
> 		debug2: kex_parse_kexinit:
> 		
> 	
> hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hm
> 		ac-md5-96
> 		debug2: kex_parse_kexinit:
> 		
> 	
> hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hm
> 		ac-md5-96
> 		debug2: kex_parse_kexinit: none,[email protected],zlib
> 		debug2: kex_parse_kexinit: none,[email protected],zlib
> 		debug2: kex_parse_kexinit:
> 		debug2: kex_parse_kexinit:
> 		debug2: kex_parse_kexinit: first_kex_follows 0
> 		debug2: kex_parse_kexinit: reserved 0
> 		debug2: kex_parse_kexinit:
> 		
> 	
> diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellma
> 		n-group1-sha1
> 		debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
> 		debug2: kex_parse_kexinit:
> 		
> 	
> aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,r
> 		[email protected],aes128-ctr,aes192-ctr,aes256-ctr
> 		debug2: kex_parse_kexinit:
> 		
> 	
> aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,r
> 		[email protected],aes128-ctr,aes192-ctr,aes256-ctr
> 		debug2: kex_parse_kexinit:
> 		
> 	
> hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hm
> 		ac-md5-96
> 		debug2: kex_parse_kexinit:
> 		
> 	
> hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hm
> 		ac-md5-96
> 		debug2: kex_parse_kexinit: none,zlib
> 		debug2: kex_parse_kexinit: none,zlib
> 		debug2: kex_parse_kexinit:
> 		debug2: kex_parse_kexinit:
> 		debug2: kex_parse_kexinit: first_kex_follows 0
> 		debug2: kex_parse_kexinit: reserved 0
> 		debug2: mac_init: found hmac-md5
> 		debug1: kex: server->client aes128-cbc hmac-md5 none
> 		debug2: mac_init: found hmac-md5
> 		debug1: kex: client->server aes128-cbc hmac-md5 none
> 		debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
> 		debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
> 		debug2: dh_gen_key: priv key bits set: 127/256
> 		debug2: bits set: 513/1024
> 		debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
> 		debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
> 		debug1: Host 'cvs.helixcommunity.org' is known and matches
> the RSA
> 	host key.
> 		debug1: Found key in /home/wichers/.ssh/known_hosts:1
> 		debug2: bits set: 487/1024
> 		debug1: ssh_rsa_verify: signature correct
> 		debug2: kex_derive_keys
> 		debug2: set_newkeys: mode 1
> 		debug1: SSH2_MSG_NEWKEYS sent
> 		debug1: expecting SSH2_MSG_NEWKEYS
> 		debug2: set_newkeys: mode 0
> 		debug1: SSH2_MSG_NEWKEYS received
> 		debug1: SSH2_MSG_SERVICE_REQUEST sent
> 		debug2: service_accept: ssh-userauth
> 		debug1: SSH2_MSG_SERVICE_ACCEPT received
> 		debug2: key: /home/wichers/.ssh/helixid_dsa (0x1002aaa0)
> 		debug1: Authentications that can continue:
> 		publickey,gssapi-with-mic,password
> 		debug1: Next authentication method: publickey
> 		debug1: Offering public key: /home/wichers/.ssh/helixid_dsa
> 		debug2: we sent a publickey packet, wait for reply
> 		debug1: Authentications that can continue:
> 		publickey,gssapi-with-mic,password
> 		debug2: we did not send a packet, disable method
> 		debug1: Next authentication method: password
> 		[email protected]'s password:
> 		
> 		Thanks in advance!
> 		
> 		Sander
> 		
> 		
> 		_______________________________________________
> 		Open-discuss mailing list
> 		[email protected]
> 	
> http://lists.helixcommunity.org/mailman/listinfo/open-discuss
> 		
> 		  
> 	
> 	
> 	  
>
>
>   

-- 
------------------------------------------------------------------------
*Kinson Liu* | Software Development Engineer | RealNetworks, Inc. | 
[email protected] | 206.892.6177

_______________________________________________
Open-discuss mailing list
[email protected]
http://lists.helixcommunity.org/mailman/listinfo/open-discuss
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.