Re: Scons Implicity Dependency not found issue

However, if on commit Y you do a clean and re-build, everything passes.
Seems some cached state is in play here?

On Wed, Oct 17, 2018 at 10:35 PM Hua Yanghao <[email protected]> wrote:

> It looks like this time even though I reproduced the issue it is not
> really sticky and always passes on a second run.
> I have re-run with the trace: https://pastebin.com/2ziqM4ri
>
> The part that is important is there is one file, e.g. included <io.h>, and
> in one version io.h is in folder A/io.h. And then there is a restructure of
> file and io.h moved to folder B/io.h.
> Folder A is in search path at commit X, build pass. Folder B is in search
> path at commit Y, build pass too.
>
> However if you first build on commit X (pass) and then switch to commit Y
> and build again, it fails like above.
>
> @Bill Deegan <[email protected]>  please help to take a look the
> trace file and let me know if more experiment I can do. At least now I can
> reproduce it reliably on-demand.
>
> On Wed, Oct 17, 2018 at 10:06 PM Hua Yanghao <[email protected]> wrote:
>
>> I finally reproduced this issue, however this --taskmastertrace=trace.log
>> the compilation passes instead of failing. Thoughts?
>>
>> hua@huyangha-mobl:~/git/usw-abc $ ./run configs/pangu.py
>> Running : ./tools/scons -Q config=configs/pangu.py
>> INFO: Processing target usw ... Done.
>> INFO: usw_config completed in 0.19 seconds.
>> __CONFIG build/configs/pangu/usw/config/config.h
>> ____SHCC build/configs/pangu/usw/firmware/arch/weak.os
>> ______AR build/configs/pangu/usw/firmware/arch/libdefault.o
>> __RANLIB build/configs/pangu/usw/firmware/arch/libdefault.o
>> ____SHCC build/configs/pangu/usw/firmware/arch/pangu/lib.os
>> ____SHCC build/configs/pangu/usw/firmware/arch/pangu/main.os
>> scons: *** [build/configs/pangu/usw/firmware/arch/pangu/test.os] Implicit
>> dependency `build/configs/pangu/usw/firmware/arch/pangu/include/io.h' not
>> found, needed by target
>> `build/configs/pangu/usw/firmware/arch/pangu/test.os'.
>> hua@huyangha-mobl:~/git/usw-abc $ ./run configs/pangu.py
>> --taskmastertrace=trace.log
>> Running : ./tools/scons -Q config=configs/pangu.py
>> --taskmastertrace=trace.log
>> INFO: Processing target usw ... Done.
>> INFO: usw_config completed in 0.21 seconds.
>> __CONFIG build/configs/pangu/usw/config/config.h
>> ____SHCC build/configs/pangu/usw/firmware/arch/pangu/test.os
>> ____SHCC build/configs/pangu/usw/firmware/boards/weak.os
>> ______AR build/configs/pangu/usw/firmware/boards/libdefault.o
>> __RANLIB build/configs/pangu/usw/firmware/boards/libdefault.o
>> ____SHCC build/configs/pangu/usw/firmware/boards/pangu/board.os
>> ____SHCC build/configs/pangu/usw/firmware/common/cpu.os
>> ____SHCC build/configs/pangu/usw/firmware/common/weak.os
>> ____SHCC build/configs/pangu/usw/firmware/common/log.os
>> ______AR build/configs/pangu/usw/firmware/common/libdefault.o
>> __RANLIB build/configs/pangu/usw/firmware/common/libdefault.o
>> ____SHCC build/configs/pangu/usw/firmware/common/main.os
>> ____SHCC build/configs/pangu/usw/firmware/drivers/pcie/dwc_ep.os
>> ______AR build/configs/pangu/usw/firmware/drivers/pcie/libdefault.o
>> __RANLIB build/configs/pangu/usw/firmware/drivers/pcie/libdefault.o
>> ____SHCC build/configs/pangu/usw/firmware/lib/cmd/cmd.os
>> ____SHCC build/configs/pangu/usw/firmware/lib/cmd/test.os
>> ____SHCC build/configs/pangu/usw/firmware/lib/fio/cmd.os
>> ____SHCC build/configs/pangu/usw/firmware/lib/fio/usw_device.os
>> ____SHCC build/configs/pangu/usw/firmware/lib/fio/linux64_device.os
>> ______AR build/configs/pangu/usw/firmware/lib/fio/libdefault.o
>> __RANLIB build/configs/pangu/usw/firmware/lib/fio/libdefault.o
>> ____SHCC
>> build/configs/pangu/usw/firmware/lib/simple_console/simple_console.os
>> ______AR build/configs/pangu/usw/firmware/lib/simple_console/libdefault.o
>> __RANLIB build/configs/pangu/usw/firmware/lib/simple_console/libdefault.o
>> ____SHCC build/configs/pangu/usw/firmware/lib/simple_pipe/connect.os
>> ____SHCC build/configs/pangu/usw/firmware/lib/simple_pipe/pipe.os
>> ______AR build/configs/pangu/usw/firmware/lib/simple_pipe/libdefault.o
>> __RANLIB build/configs/pangu/usw/firmware/lib/simple_pipe/libdefault.o
>> ____SHCC build/configs/pangu/usw/firmware/test/console/hello.os
>> ____SHCC build/configs/pangu/usw/firmware/test/console/test.os
>> ____SHCC build/configs/pangu/usw/firmware/test/example/test.os
>> ____SHLD build/configs/pangu/usw/libusw.so
>> _USWHASH build/configs/pangu/usw/libusw.so
>> _USWHASH build/configs/pangu/usw/libusw.so --> Changed
>> hua@huyangha-mobl:~/git/usw-abc $
>>
>> On Tue, Oct 16, 2018 at 11:10 PM Hua Yanghao <[email protected]>
>> wrote:
>>
>>> Config.h does not include any other headers. And the problem is it is
>>> not easily reproducible. However once it happens it is sticky. I will try
>>> harder tomorrow and get back to you. Thanks.
>>>
>>> On Tue 16. Oct 2018 at 23:06, Bill Deegan <[email protected]>
>>> wrote:
>>>
>>>> Try running with
>>>>
>>>> --taskmastertrace=trace.log
>>>>
>>>> You'll get a pretty verbose log there, and search for io.h it should
>>>> show more information about what's happening.
>>>>
>>>> Is io.h included via "-include config.h" ?
>>>>
>>>> -Bill
>>>>
>>>> On Tue, Oct 16, 2018 at 5:01 PM Hua Yanghao <[email protected]>
>>>> wrote:
>>>>
>>>>> Hi Bill,
>>>>> Sorry I missed that one.
>>>>>
>>>>> The full command line when hit the failure:
>>>>> gcc -o build/configs/pangu/usw/firmware/arch/pangu/test.os -c -g -Wall
>>>>> -Werror -include config.h -Wno-error=main -Wno-main -Wno-format-security
>>>>> -Wno-format -std=gnu99 -D_USW_FLAGS_TEST_0 -D_USW_FLAGS_TEST_1
>>>>> -D_USW_FLAGS_TEST_2 -fPIC -Ibuild/configs/pangu/usw/config
>>>>> -Ibuild/configs/pangu/usw/firmware/arch/pangu/include
>>>>> -Ibuild/configs/pangu/usw/firmware/include
>>>>> -Ibuild/configs/pangu/usw/firmware/arch/include
>>>>> -Ibuild/configs/pangu/usw/firmware/common/include
>>>>> -Ibuild/configs/pangu/usw/firmware/lib/cmd/include
>>>>> -Ibuild/configs/pangu/usw/firmware/lib/simple_pipe/include
>>>>> -Ibuild/configs/pangu/usw/firmware/lib/fio/include
>>>>> -Ibuild/configs/pangu/usw/firmware/lib/simple_console/include
>>>>> -Ibuild/configs/pangu/usw/firmware/test/example/include
>>>>> -Ibuild/configs/pangu/usw/firmware/test/console/include
>>>>> -Ibuild/configs/pangu/usw/firmware/boards/include
>>>>> -Ibuild/configs/pangu/usw/firmware/boards/pangu/include
>>>>> -Ibuild/configs/pangu/usw/firmware/drivers/pcie/include
>>>>> -Ibuild/configs/pangu/usw/config
>>>>> -Ibuild/configs/pangu/usw/firmware/arch/pangu/include
>>>>> -Ibuild/configs/pangu/usw/firmware/include
>>>>> -Ibuild/configs/pangu/usw/firmware/arch/include
>>>>> -Ibuild/configs/pangu/usw/firmware/common/include
>>>>> -Ibuild/configs/pangu/usw/firmware/lib/cmd/include
>>>>> -Ibuild/configs/pangu/usw/firmware/lib/simple_pipe/include
>>>>> -Ibuild/configs/pangu/usw/firmware/lib/fio/include
>>>>> -Ibuild/configs/pangu/usw/firmware/lib/simple_console/include
>>>>> -Ibuild/configs/pangu/usw/firmware/test/example/include
>>>>> -Ibuild/configs/pangu/usw/firmware/test/console/include
>>>>> -Ibuild/configs/pangu/usw/firmware/boards/include
>>>>> -Ibuild/configs/pangu/usw/firmware/boards/pangu/include
>>>>> -Ibuild/configs/pangu/usw/firmware/drivers/pcie/include
>>>>> build/configs/pangu/usw/firmware/arch/pangu/test.c
>>>>>
>>>>> And my CPPPATH seems also matching the command line:
>>>>> ['/home/hua/git/usw/build/configs/pangu/usw/config',
>>>>> '/home/hua/git/usw/build/configs/pangu/usw/firmware/arch/pangu/include',
>>>>> '/home/hua/git/usw/build/configs/pangu/usw/firmware/include',
>>>>> '/home/hua/git/usw/build/configs/pangu/usw/firmware/arch/include',
>>>>> '/home/hua/git/usw/build/configs/pangu/usw/firmware/common/include',
>>>>> '/home/hua/git/usw/build/configs/pangu/usw/firmware/lib/cmd/include',
>>>>> '/home/hua/git/usw/build/configs/pangu/usw/firmware/lib/simple_pipe/include',
>>>>> '/home/hua/git/usw/build/configs/pangu/usw/firmware/lib/fio/include',
>>>>> '/home/hua/git/usw/build/configs/pangu/usw/firmware/lib/simple_console/include',
>>>>> '/home/hua/git/usw/build/configs/pangu/usw/firmware/test/example/include',
>>>>> '/home/hua/git/usw/build/configs/pangu/usw/firmware/test/console/include',
>>>>> '/home/hua/git/usw/build/configs/pangu/usw/firmware/boards/include',
>>>>> '/home/hua/git/usw/build/configs/pangu/usw/firmware/boards/pangu/include',
>>>>> '/home/hua/git/usw/build/configs/pangu/usw/firmware/drivers/pcie/include',
>>>>> '/home/hua/git/usw/build/configs/pangu/usw/config',
>>>>> '/home/hua/git/usw/build/configs/pangu/usw/firmware/arch/pangu/include',
>>>>> '/home/hua/git/usw/build/configs/pangu/usw/firmware/include',
>>>>> '/home/hua/git/usw/build/configs/pangu/usw/firmware/arch/include',
>>>>> '/home/hua/git/usw/build/configs/pangu/usw/firmware/common/include',
>>>>> '/home/hua/git/usw/build/configs/pangu/usw/firmware/lib/cmd/include',
>>>>> '/home/hua/git/usw/build/configs/pangu/usw/firmware/lib/simple_pipe/include',
>>>>> '/home/hua/git/usw/build/configs/pangu/usw/firmware/lib/fio/include',
>>>>> '/home/hua/git/usw/build/configs/pangu/usw/firmware/lib/simple_console/include',
>>>>> '/home/hua/git/usw/build/configs/pangu/usw/firmware/test/example/include',
>>>>> '/home/hua/git/usw/build/configs/pangu/usw/firmware/test/console/include',
>>>>> '/home/hua/git/usw/build/configs/pangu/usw/firmware/boards/include',
>>>>> '/home/hua/git/usw/build/configs/pangu/usw/firmware/boards/pangu/include',
>>>>> '/home/hua/git/usw/build/configs/pangu/usw/firmware/drivers/pcie/include']
>>>>>
>>>>> Note the firmware/include is in both command line and CPPPATH, that's
>>>>> where my io.h is located.
>>>>>
>>>>> Best Regards,
>>>>> Yanghao
>>>>>
>>>>>
>>>>> On Tue, Oct 16, 2018 at 8:07 PM Bill Deegan <[email protected]>
>>>>> wrote:
>>>>>
>>>>>> You've still not replied with the compile command line.
>>>>>> Also what's your CPPPATH?
>>>>>>
>>>>>>
>>>>>> On Tue, Oct 16, 2018 at 1:25 PM Hua Yanghao <[email protected]>
>>>>>> wrote:
>>>>>>
>>>>>>> it is the correct path and io.h is actually duplicated from
>>>>>>> firmware/include/io.h
>>>>>>>
>>>>>>> On Tue 16. Oct 2018 at 17:34, Bill Deegan <[email protected]>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> Is `build/configs/pangu/usw/firmware/arch/pangu/include/io.h' the
>>>>>>>> correct path to io.h?
>>>>>>>> Are you using duplicate=0, or not specifying in you SConscript()?
>>>>>>>> Are you using chdir somewhere in your SCons logic?
>>>>>>>>
>>>>>>>> Also, please paste the compile line for the compile which should
>>>>>>>> find io.h when it's passing?
>>>>>>>>
>>>>>>>> On Tue, Oct 16, 2018 at 11:14 AM Hua Yanghao <[email protected]>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> no it is static file.
>>>>>>>>>
>>>>>>>>> On Tue 16. Oct 2018 at 17:08, Bill Deegan <
>>>>>>>>> [email protected]> wrote:
>>>>>>>>>
>>>>>>>>>> Is io.h a generated file?
>>>>>>>>>> Paste the compile line for the compile which should find io.h
>>>>>>>>>> when it's passing?
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Tue, Oct 16, 2018 at 8:54 AM Hua Yanghao <[email protected]>
>>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>>> Hi Bill,
>>>>>>>>>>> Yes io.h is on my CPPPATH. And I am using variant_dir="build" for
>>>>>>>>>>> SConscript files. So normally all used header files will end up
>>>>>>>>>>> in the
>>>>>>>>>>> build folder too. But occasionally scons seems missed it. I am
>>>>>>>>>>> struggling to reproduce it ...
>>>>>>>>>>>
>>>>>>>>>>> BR, Yanghao
>>>>>>>>>>> On Tue, Oct 16, 2018 at 2:51 PM Bill Deegan <
>>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>> >
>>>>>>>>>>> > Yes. Headers are scanned recursively.
>>>>>>>>>>> > Implicit cache should only be enable by command line flag or
>>>>>>>>>>> SetOption()
>>>>>>>>>>> >
>>>>>>>>>>> > Where is io.h located? is it in your CPPPATH?
>>>>>>>>>>> >
>>>>>>>>>>> > On Tue, Oct 16, 2018 at 6:43 AM Hua Yanghao <
>>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>> >>
>>>>>>>>>>> >> By the way, is scons scanner scans C file headers
>>>>>>>>>>> recursively? Thanks.
>>>>>>>>>>> >> On Tue, Oct 16, 2018 at 12:40 PM Hua Yanghao <
>>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>> >> >
>>>>>>>>>>> >> > scons: ***
>>>>>>>>>>> [build/configs/pangu/usw/firmware/arch/pangu/test.os]
>>>>>>>>>>> >> > Implicit dependency
>>>>>>>>>>> >> > `build/configs/pangu/usw/firmware/arch/pangu/include/io.h'
>>>>>>>>>>> not found,
>>>>>>>>>>> >> > needed by target
>>>>>>>>>>> `build/configs/pangu/usw/firmware/arch/pangu/test.os'
>>>>>>>>>>> >> >
>>>>>>>>>>> >> > I recently run into this odd problem, and it is very
>>>>>>>>>>> difficult to
>>>>>>>>>>> >> > reproduce. I did not explicitly enable the "implicit_cache"
>>>>>>>>>>> option
>>>>>>>>>>> >> > anywhere in my code. If I simply remove the build folder
>>>>>>>>>>> and then
>>>>>>>>>>> >> > re-build everything works as normal. the problem happens
>>>>>>>>>>> when there is
>>>>>>>>>>> >> > a old build, and then I pulled in some new code where this
>>>>>>>>>>> "test.c"
>>>>>>>>>>> >> > has included an additional header io.h and scons seems not
>>>>>>>>>>> re-scanning
>>>>>>>>>>> >> > the file by default.
>>>>>>>>>>> >> >
>>>>>>>>>>> >> > I am using scons 3.0.1, is the implict_cache by default
>>>>>>>>>>> enabled there
>>>>>>>>>>> >> > and I have to disable it manually?
>>>>>>>>>>> >> >
>>>>>>>>>>> >> > Thanks,
>>>>>>>>>>> >> > Yanghao Hua
>>>>>>>>>>> >> _______________________________________________
>>>>>>>>>>> >> Scons-users mailing list
>>>>>>>>>>> >> [email protected]
>>>>>>>>>>> >> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>>>>>>> >
>>>>>>>>>>> > _______________________________________________
>>>>>>>>>>> > Scons-users mailing list
>>>>>>>>>>> > [email protected]
>>>>>>>>>>> > https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> Scons-users mailing list
>>>>>>>>>>> [email protected]
>>>>>>>>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> Scons-users mailing list
>>>>>>>>>> [email protected]
>>>>>>>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> Scons-users mailing list
>>>>>>>>> [email protected]
>>>>>>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Scons-users mailing list
>>>>>>>> [email protected]
>>>>>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Scons-users mailing list
>>>>>>> [email protected]
>>>>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>>>
>>>>>> _______________________________________________
>>>>>> Scons-users mailing list
>>>>>> [email protected]
>>>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>>
>>>>> _______________________________________________
>>>>> Scons-users mailing list
>>>>> [email protected]
>>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>
>>>> _______________________________________________
>>>> Scons-users mailing list
>>>> [email protected]
>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>
>>>

_______________________________________________
Scons-users mailing list
[email protected]
https://pairlist4.pair.net/mailman/listinfo/scons-users