Re: Digest for [email protected] - 4 updates in 1 topic
Robin Dunn <[email protected]>
| Newsgroups | gmane.comp.python.wxpython |
|---|---|
| Message-ID | <[email protected]> |
See this page about building with pip:
https://wxpython.org/blog/2017-08-17-builds-for-linux-with-pip/index.html
Robin
On Saturday, February 15, 2020 at 10:14:51 AM UTC-8, johnf wrote:
>
> I am not the best person to help with this issue. But it appears that you
> have not installed GTK2 or GTK3. They need to be installed and make sure
> you include the development files too.
>
> There was a link on the wxPython 4 on how to build the lib. I don't
> recall where that link is located but I had to use it couple years ago.
> Maybe Robin can help.
>
> Johnf
>
> On 2/15/20 10:06 AM, Daniel Presley wrote:
>
> I tried using PIP and failed. This is the output I got:
>
> [dan@localhost ~]$ pip install wxpython
> Collecting wxpython
> Using cached
> https://files.pythonhosted.org/packages/b9/8b/31267dd6d026a082faed35ec8d97522c0236f2e083bf15aff64d982215e1/wxPython-4.0.7.post2.tar.gz
> Requirement already satisfied: pillow in
> /usr/lib64/python3.6/site-packages (from wxpython) (5.1.0)
> Requirement already satisfied: six in /usr/lib/python3.6/site-packages
> (from wxpython) (1.11.0)
> Requirement already satisfied: numpy in
> ./.local/lib/python3.6/site-packages (from wxpython) (1.18.1)
> Installing collected packages: wxpython
> Running setup.py install for wxpython ... error
> ERROR: Complete output from command /usr/bin/python3 -u -c 'import
> setuptools,
> tokenize;__file__='"'"'/tmp/pip-install-9ry95jz4/wxpython/setup.py'"'"';f=getattr(tokenize,
> '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"',
> '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))'
> install --record /tmp/pip-record-jws6rto1/install-record.txt
> --single-version-externally-managed --compile:
> ERROR: running install
> running build
> WARNING: Building this way assumes that all generated files have been
> generated already. If that is not the case then use build.py directly
> to generate the source and perform the build stage. You can use
> --skip-build with the bdist_* or install commands to avoid this
> message and the wxWidgets and Phoenix build steps in the future.
>
> "/usr/bin/python3" -u build.py build
>
> Will build using: "/usr/bin/python3"
>
> 3.6.5 (default, Jan 16 2019, 21:12:16)
>
> [GCC 7.3.0]
>
> Python's architecture is 64bit
>
> cfg.VERSION: 4.0.7.post2
>
>
>
> Running command: build
>
> Running command: build_wx
>
> wxWidgets build options: ['--wxpython', '--unicode', '--gtk3']
>
> Configure options: ['--enable-unicode', '--with-gtk=3',
> '--enable-sound', '--enable-graphics_ctx', '--enable-display',
> '--enable-geometry', '--enable-debug_flag', '--enable-optimise',
> '--disable-debugreport', '--enable-uiactionsim', '--enable-autoidman',
> '--with-sdl']
>
> /tmp/pip-install-9ry95jz4/wxpython/ext/wxWidgets/configure
> --enable-unicode --with-gtk=3 --enable-sound --enable-graphics_ctx
> --enable-display --enable-geometry --enable-debug_flag --enable-optimise
> --disable-debugreport --enable-uiactionsim --enable-autoidman --with-sdl
>
>
> checking build system type... x86_64-pc-linux-gnu
>
> checking host system type... x86_64-pc-linux-gnu
>
> checking for --disable-gui... no
>
> checking for --enable-monolithic... no
>
> checking for --enable-plugins... no
>
> checking for --without-subdirs... no
>
> checking for --enable-official_build... no
>
> checking for --disable-all-features... no
>
> checking for --enable-universal... no
>
> checking for --enable-nanox... no
>
> checking for --enable-gpe... no
>
> checking for toolkit... gtk
>
> checking for --with-libpng... yes
>
> checking for --with-libjpeg... yes
>
> checking for --with-libtiff... yes
>
> checking for --without-libjbig... no
>
> checking for --without-liblzma... no
>
> checking for --with-libxpm... yes
>
> checking for --with-libiconv... yes
>
> checking for --with-libmspack... no
>
> checking for --without-gtkprint... no
>
> checking for --with-gnomevfs... no
>
> checking for --with-libnotify... yes
>
> checking for --with-hildon... no
>
> checking for --with-opengl... auto
>
> checking for --with-dmalloc... no
>
> checking for --with-sdl... yes
>
> checking for --with-regex... yes
>
> checking for --with-zlib... yes
>
> checking for --with-expat... yes
>
> checking for --with-macosx-sdk...
>
> checking for --with-macosx-version-min...
>
> checking for --enable-debug... default
>
> checking for --disable-debug_flag... no
>
> checking for --enable-debug_info... no
>
> checking for --enable-debug_gdb... no
>
> checking for --enable-debug_cntxt... no
>
> checking for --enable-mem_tracing... no
>
> checking for --disable-shared... no
>
> checking for --enable-stl... no
>
> checking for --enable-std_containers... no
>
> checking for --enable-std_iostreams... yes
>
> checking for --enable-std_string... yes
>
> checking for --enable-std_string_conv_in_wxstring... no
>
> checking for --disable-unicode... no
>
> checking for --enable-mslu... no
>
> checking for --enable-utf8... no
>
> checking for --enable-utf8only... no
>
> checking for --enable-extended_rtti... no
>
> checking for --disable-optimise... no
>
> checking for --enable-profile... no
>
> checking for --enable-no_rtti... no
>
> checking for --enable-no_exceptions... no
>
> checking for --enable-permissive... no
>
> checking for --enable-no_deps... no
>
> checking for --disable-vararg_macros... no
>
> checking for --enable-universal_binary... no
>
> checking for --enable-macosx_arch... no
>
> checking for --enable-compat26... no
>
> checking for --disable-compat28... no
>
> checking for --disable-rpath... no
>
> checking for --enable-objc_uniquifying... no
>
> checking for --disable-visibility... no
>
> checking for --disable-tls... no
>
> checking for --enable-intl... yes
>
> checking for --enable-xlocale... yes
>
> checking for --enable-config... yes
>
> checking for --enable-protocols... yes
>
> checking for --enable-ftp... yes
>
> checking for --enable-http... yes
>
> checking for --enable-fileproto... yes
>
> checking for --enable-sockets... yes
>
> checking for --enable-ipv6... no
>
> checking for --enable-ole... yes
>
> checking for --enable-dataobj... yes
>
> checking for --enable-ipc... yes
>
> checking for --enable-baseevtloop... yes
>
> checking for --enable-epollloop... yes
>
> checking for --enable-selectloop... yes
>
> checking for --enable-any... yes
>
> checking for --enable-apple_ieee... yes
>
> checking for --enable-arcstream... yes
>
> checking for --enable-base64... yes
>
> checking for --enable-backtrace... yes
>
> checking for --enable-catch_segvs... yes
>
> checking for --enable-cmdline... yes
>
> checking for --enable-datetime... yes
>
> checking for --enable-debugreport... no
>
> checking for --enable-dialupman... yes
>
> checking for --enable-dynlib... yes
>
> checking for --enable-dynamicloader... yes
>
> checking for --enable-exceptions... yes
>
> checking for --enable-ffile... yes
>
> checking for --enable-file... yes
>
> checking for --enable-filehistory... yes
>
> checking for --enable-filesystem... yes
>
> checking for --enable-fontenum... yes
>
> checking for --enable-fontmap... yes
>
> checking for --enable-fs_archive... yes
>
> checking for --enable-fs_inet... yes
>
> checking for --enable-fs_zip... yes
>
> checking for --enable-fsvolume... yes
>
> checking for --enable-fswatcher... yes
>
> checking for --enable-geometry... yes
>
> checking for --enable-log... yes
>
> checking for --enable-longlong... yes
>
> checking for --enable-mimetype... yes
>
> checking for --enable-printfposparam... yes
>
> checking for --enable-snglinst... yes
>
> checking for --enable-sound... yes
>
> checking for --enable-stdpaths... yes
>
> checking for --enable-stopwatch... yes
>
> checking for --enable-streams... yes
>
> checking for --enable-sysoptions... yes
>
> checking for --enable-tarstream... yes
>
> checking for --enable-textbuf... yes
>
> checking for --enable-textfile... yes
>
> checking for --enable-timer... yes
>
> checking for --enable-variant... yes
>
> checking for --enable-zipstream... yes
>
> checking for --enable-url... yes
>
> checking for --enable-protocol... yes
>
> checking for --enable-protocol_http... yes
>
> checking for --enable-protocol_ftp... yes
>
> checking for --enable-protocol_file... yes
>
> checking for --enable-threads... yes
>
> checking for --enable-iniconf... no
>
> checking for --enable-regkey... yes
>
> checking for --enable-docview... yes
>
> checking for --enable-help... yes
>
> checking for --enable-mshtmlhelp... yes
>
> checking for --enable-html... yes
>
> checking for --enable-htmlhelp... yes
>
> checking for --enable-xrc... yes
>
> checking for --enable-aui... yes
>
> checking for --enable-propgrid... yes
>
> checking for --enable-ribbon... yes
>
> checking for --enable-stc... yes
>
> checking for --enable-constraints... yes
>
> checking for --enable-loggui... yes
>
> checking for --enable-logwin... yes
>
> checking for --enable-logdialog... yes
>
> checking for --enable-mdi... yes
>
> checking for --enable-mdidoc... yes
>
> checking for --enable-mediactrl... auto
>
> checking for --enable-gstreamer8... no
>
> checking for --enable-richtext... yes
>
> checking for --enable-postscript... yes
>
> checking for --enable-printarch... yes
>
> checking for --enable-svg... yes
>
> checking for --enable-webkit... yes
>
> checking for --enable-webview... yes
>
> checking for --enable-graphics_ctx... yes
>
> checking for --enable-clipboard... yes
>
> checking for --enable-dnd... yes
>
> checking for --disable-controls... no
>
> checking for --enable-markup... yes
>
> checking for --enable-accel... yes
>
> checking for --enable-animatectrl... yes
>
> checking for --enable-bannerwindow... yes
>
> checking for --enable-artstd... yes
>
> checking for --enable-arttango... auto
>
> checking for --enable-bmpbutton... yes
>
> checking for --enable-bmpcombobox... yes
>
> checking for --enable-button... yes
>
> checking for --enable-calendar... yes
>
> checking for --enable-caret... yes
>
> checking for --enable-checkbox... yes
>
> checking for --enable-checklst... yes
>
> checking for --enable-choice... yes
>
> checking for --enable-choicebook... yes
>
> checking for --enable-collpane... yes
>
> checking for --enable-colourpicker... yes
>
> checking for --enable-combobox... yes
>
> checking for --enable-comboctrl... yes
>
> checking for --enable-commandlinkbutton... yes
>
> checking for --enable-dataviewctrl... yes
>
> checking for --enable-datepick... yes
>
> checking for --enable-detect_sm... yes
>
> checking for --enable-dirpicker... yes
>
> checking for --enable-display... yes
>
> checking for --enable-editablebox... yes
>
> checking for --enable-filectrl... yes
>
> checking for --enable-filepicker... yes
>
> checking for --enable-fontpicker... yes
>
> checking for --enable-gauge... yes
>
> checking for --enable-grid... yes
>
> checking for --enable-headerctrl... yes
>
> checking for --enable-hyperlink... yes
>
> checking for --enable-imaglist... yes
>
> checking for --enable-infobar... yes
>
> checking for --enable-listbook... yes
>
> checking for --enable-listbox... yes
>
> checking for --enable-listctrl... yes
>
> checking for --enable-notebook... yes
>
> checking for --enable-notifmsg... yes
>
> checking for --enable-odcombobox... yes
>
> checking for --enable-popupwin... yes
>
> checking for --enable-prefseditor... yes
>
> checking for --enable-radiobox... yes
>
> checking for --enable-radiobtn... yes
>
> checking for --enable-richmsgdlg... yes
>
> checking for --enable-richtooltip... yes
>
> checking for --enable-rearrangectrl... yes
>
> checking for --enable-sash... yes
>
> checking for --enable-scrollbar... yes
>
> checking for --enable-searchctrl... yes
>
> checking for --enable-slider... yes
>
> checking for --enable-spinbtn... yes
>
> checking for --enable-spinctrl... yes
>
> checking for --enable-splitter... yes
>
> checking for --enable-statbmp... yes
>
> checking for --enable-statbox... yes
>
> checking for --enable-statline... yes
>
> checking for --enable-stattext... yes
>
> checking for --enable-statusbar... yes
>
> checking for --enable-taskbaricon... yes
>
> checking for --enable-tbarnative... yes
>
> checking for --enable-textctrl... yes
>
> checking for --enable-timepick... yes
>
> checking for --enable-tipwindow... yes
>
> checking for --enable-togglebtn... yes
>
> checking for --enable-toolbar... yes
>
> checking for --enable-toolbook... yes
>
> checking for --enable-treebook... yes
>
> checking for --enable-treectrl... yes
>
> checking for --enable-treelist... yes
>
> checking for --enable-commondlg... yes
>
> checking for --enable-aboutdlg... yes
>
> checking for --enable-choicedlg... yes
>
> checking for --enable-coldlg... yes
>
> checking for --enable-filedlg... yes
>
> checking for --enable-finddlg... yes
>
> checking for --enable-fontdlg... yes
>
> checking for --enable-dirdlg... yes
>
> checking for --enable-msgdlg... yes
>
> checking for --enable-numberdlg... yes
>
> checking for --enable-splash... yes
>
> checking for --enable-textdlg... yes
>
> checking for --enable-tipdlg... yes
>
> checking for --enable-progressdlg... yes
>
> checking for --enable-wizarddlg... yes
>
> checking for --enable-menus... yes
>
> checking for --enable-miniframe... yes
>
> checking for --enable-tooltips... yes
>
> checking for --enable-splines... yes
>
> checking for --enable-mousewheel... yes
>
> checking for --enable-validators... yes
>
> checking for --enable-busyinfo... yes
>
> checking for --enable-hotkey... auto
>
> checking for --enable-joystick... yes
>
> checking for --enable-metafile... auto
>
> checking for --enable-dragimage... yes
>
> checking for --enable-accessibility... no
>
> checking for --enable-uiactionsim... yes
>
> checking for --enable-dctransform... yes
>
> checking for --enable-webviewwebkit... yes
>
> checking for --enable-palette... yes
>
> checking for --enable-image... yes
>
> checking for --enable-gif... yes
>
> checking for --enable-pcx... yes
>
> checking for --enable-tga... yes
>
> checking for --enable-iff... yes
>
> checking for --enable-pnm... yes
>
> checking for --enable-xpm... yes
>
> checking for --enable-ico_cur... yes
>
> checking for --enable-dccache... yes
>
> checking for --enable-ps-in-msw... yes
>
> checking for --enable-ownerdrawn... yes
>
> checking for --enable-uxtheme... yes
>
> checking for --enable-wxdib... yes
>
> checking for --enable-webviewie... yes
>
> checking for --enable-autoidman... yes
>
> checking for gcc... gcc
>
> checking whether the C compiler works... yes
>
> checking for C compiler default output file name... a.out
>
> checking for suffix of executables...
>
> checking whether we are cross compiling... no
>
> checking for suffix of object files... o
>
> checking whether we are using the GNU C compiler... yes
>
> checking whether gcc accepts -g... yes
>
> checking for gcc option to accept ISO C89... none needed
>
> checking whether we are using the Intel C compiler... no
>
> checking how to run the C preprocessor... gcc -E
>
> checking for grep that handles long lines and -e... /bin/grep
>
> checking for egrep... /bin/grep -E
>
> checking whether gcc needs -traditional... no
>
> checking for g++... g++
>
> checking whether we are using the GNU C++ compiler... yes
>
> checking whether g++ accepts -g... yes
>
> checking whether we are using the Intel C++ compiler... no
>
> checking whether we are using the Sun C++ compiler... no
>
> checking for ar... ar
>
> checking for ANSI C header files... yes
>
> checking for sys/types.h... yes
>
> checking for sys/stat.h... yes
>
> checking for stdlib.h... yes
>
> checking for string.h... yes
>
> checking for memory.h... yes
>
> checking for strings.h... yes
>
> checking for inttypes.h... yes
>
> checking for stdint.h... yes
>
> checking for unistd.h... yes
>
> checking for langinfo.h... yes
>
> checking for wchar.h... yes
>
> checking for sys/select.h... yes
>
> checking for cxxabi.h... yes
>
> checking for an ANSI C-conforming const... yes
>
> checking for inline... inline
>
> checking size of short... 2
>
> checking size of void *... 8
>
> checking size of int... 4
>
> checking size of long... 8
>
> checking size of size_t... 8
>
> checking size of long long... 8
>
> checking size of wchar_t... 4
>
> checking for va_copy... yes
>
> checking whether the compiler supports variadic macros... yes
>
> checking for _FILE_OFFSET_BITS value needed for large files... 64
>
> checking if large file support is available... yes
>
> checking for _LARGEFILE_SOURCE value needed for large files... no
>
> checking whether byte ordering is bigendian... no
>
> checking for iostream... yes
>
> checking if C++ compiler supports the explicit keyword... yes
>
> checking for std::wstring in <string>... yes
>
> checking for std::istream... yes
>
> checking for std::ostream... yes
>
> checking how to run the C++ preprocessor... g++ -E
>
> checking type_traits usability... yes
>
> checking type_traits presence... yes
>
> checking for type_traits... yes
>
> checking for __sync_fetch_and_add and __sync_sub_and_fetch builtins...
> yes
> checking for libraries directories... /usr/lib64
>
> checking for cos... no
>
> checking for floor... no
>
> checking if floating point functions link without -lm... no
>
> checking for sin... yes
>
> checking for ceil... yes
>
> checking if fl
>
> ...
--
You received this message because you are subscribed to the Google Groups "wxPython-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/wxpython-users/b0ccb9e5-5817-4a99-8680-c63eafb3ae90%40googlegroups.com.