Re: Digest for [email protected] - 4 updates in 1 topic
johnf <[email protected]>
| Newsgroups | gmane.comp.python.wxpython |
|---|---|
| Message-ID | <[email protected]> |
I am not the best person to help with this issue. But it appears that
you have not installed GTK2 or GTK3. They need to be installed and make
sure you include the development files too.
There was a link on the wxPython 4 on how to build the lib. I don't
recall where that link is located but I had to use it couple years ago.
Maybe Robin can help.
Johnf
On 2/15/20 10:06 AM, Daniel Presley wrote:
> I tried using PIP and failed. This is the output I got:
>
> [dan@localhost ~]$ pip install wxpython
> Collecting wxpython
> Using cached
> https://files.pythonhosted.org/packages/b9/8b/31267dd6d026a082faed35ec8d97522c0236f2e083bf15aff64d982215e1/wxPython-4.0.7.post2.tar.gz
> Requirement already satisfied: pillow in
> /usr/lib64/python3.6/site-packages (from wxpython) (5.1.0)
> Requirement already satisfied: six in /usr/lib/python3.6/site-packages
> (from wxpython) (1.11.0)
> Requirement already satisfied: numpy in
> ./.local/lib/python3.6/site-packages (from wxpython) (1.18.1)
> Installing collected packages: wxpython
> Running setup.py install for wxpython ... error
> ERROR: Complete output from command /usr/bin/python3 -u -c 'import
> setuptools,
> tokenize;__file__='"'"'/tmp/pip-install-9ry95jz4/wxpython/setup.py'"'"';f=getattr(tokenize,
> '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"',
> '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))'
> install --record /tmp/pip-record-jws6rto1/install-record.txt
> --single-version-externally-managed --compile:
> ERROR: running install
> running build
> WARNING: Building this way assumes that all generated files have been
> generated already. If that is not the case then use build.py directly
> to generate the source and perform the build stage. You can use
> --skip-build with the bdist_* or install commands to avoid this
> message and the wxWidgets and Phoenix build steps in the future.
>
> "/usr/bin/python3" -u build.py build
> Will build using: "/usr/bin/python3"
> 3.6.5 (default, Jan 16 2019, 21:12:16)
> [GCC 7.3.0]
> Python's architecture is 64bit
> cfg.VERSION: 4.0.7.post2
>
> Running command: build
> Running command: build_wx
> wxWidgets build options: ['--wxpython', '--unicode', '--gtk3']
> Configure options: ['--enable-unicode', '--with-gtk=3',
> '--enable-sound', '--enable-graphics_ctx', '--enable-display',
> '--enable-geometry', '--enable-debug_flag', '--enable-optimise',
> '--disable-debugreport', '--enable-uiactionsim', '--enable-autoidman',
> '--with-sdl']
> /tmp/pip-install-9ry95jz4/wxpython/ext/wxWidgets/configure
> --enable-unicode --with-gtk=3 --enable-sound --enable-graphics_ctx
> --enable-display --enable-geometry --enable-debug_flag
> --enable-optimise --disable-debugreport --enable-uiactionsim
> --enable-autoidman --with-sdl
> checking build system type... x86_64-pc-linux-gnu
> checking host system type... x86_64-pc-linux-gnu
> checking for --disable-gui... no
> checking for --enable-monolithic... no
> checking for --enable-plugins... no
> checking for --without-subdirs... no
> checking for --enable-official_build... no
> checking for --disable-all-features... no
> checking for --enable-universal... no
> checking for --enable-nanox... no
> checking for --enable-gpe... no
> checking for toolkit... gtk
> checking for --with-libpng... yes
> checking for --with-libjpeg... yes
> checking for --with-libtiff... yes
> checking for --without-libjbig... no
> checking for --without-liblzma... no
> checking for --with-libxpm... yes
> checking for --with-libiconv... yes
> checking for --with-libmspack... no
> checking for --without-gtkprint... no
> checking for --with-gnomevfs... no
> checking for --with-libnotify... yes
> checking for --with-hildon... no
> checking for --with-opengl... auto
> checking for --with-dmalloc... no
> checking for --with-sdl... yes
> checking for --with-regex... yes
> checking for --with-zlib... yes
> checking for --with-expat... yes
> checking for --with-macosx-sdk...
> checking for --with-macosx-version-min...
> checking for --enable-debug... default
> checking for --disable-debug_flag... no
> checking for --enable-debug_info... no
> checking for --enable-debug_gdb... no
> checking for --enable-debug_cntxt... no
> checking for --enable-mem_tracing... no
> checking for --disable-shared... no
> checking for --enable-stl... no
> checking for --enable-std_containers... no
> checking for --enable-std_iostreams... yes
> checking for --enable-std_string... yes
> checking for --enable-std_string_conv_in_wxstring... no
> checking for --disable-unicode... no
> checking for --enable-mslu... no
> checking for --enable-utf8... no
> checking for --enable-utf8only... no
> checking for --enable-extended_rtti... no
> checking for --disable-optimise... no
> checking for --enable-profile... no
> checking for --enable-no_rtti... no
> checking for --enable-no_exceptions... no
> checking for --enable-permissive... no
> checking for --enable-no_deps... no
> checking for --disable-vararg_macros... no
> checking for --enable-universal_binary... no
> checking for --enable-macosx_arch... no
> checking for --enable-compat26... no
> checking for --disable-compat28... no
> checking for --disable-rpath... no
> checking for --enable-objc_uniquifying... no
> checking for --disable-visibility... no
> checking for --disable-tls... no
> checking for --enable-intl... yes
> checking for --enable-xlocale... yes
> checking for --enable-config... yes
> checking for --enable-protocols... yes
> checking for --enable-ftp... yes
> checking for --enable-http... yes
> checking for --enable-fileproto... yes
> checking for --enable-sockets... yes
> checking for --enable-ipv6... no
> checking for --enable-ole... yes
> checking for --enable-dataobj... yes
> checking for --enable-ipc... yes
> checking for --enable-baseevtloop... yes
> checking for --enable-epollloop... yes
> checking for --enable-selectloop... yes
> checking for --enable-any... yes
> checking for --enable-apple_ieee... yes
> checking for --enable-arcstream... yes
> checking for --enable-base64... yes
> checking for --enable-backtrace... yes
> checking for --enable-catch_segvs... yes
> checking for --enable-cmdline... yes
> checking for --enable-datetime... yes
> checking for --enable-debugreport... no
> checking for --enable-dialupman... yes
> checking for --enable-dynlib... yes
> checking for --enable-dynamicloader... yes
> checking for --enable-exceptions... yes
> checking for --enable-ffile... yes
> checking for --enable-file... yes
> checking for --enable-filehistory... yes
> checking for --enable-filesystem... yes
> checking for --enable-fontenum... yes
> checking for --enable-fontmap... yes
> checking for --enable-fs_archive... yes
> checking for --enable-fs_inet... yes
> checking for --enable-fs_zip... yes
> checking for --enable-fsvolume... yes
> checking for --enable-fswatcher... yes
> checking for --enable-geometry... yes
> checking for --enable-log... yes
> checking for --enable-longlong... yes
> checking for --enable-mimetype... yes
> checking for --enable-printfposparam... yes
> checking for --enable-snglinst... yes
> checking for --enable-sound... yes
> checking for --enable-stdpaths... yes
> checking for --enable-stopwatch... yes
> checking for --enable-streams... yes
> checking for --enable-sysoptions... yes
> checking for --enable-tarstream... yes
> checking for --enable-textbuf... yes
> checking for --enable-textfile... yes
> checking for --enable-timer... yes
> checking for --enable-variant... yes
> checking for --enable-zipstream... yes
> checking for --enable-url... yes
> checking for --enable-protocol... yes
> checking for --enable-protocol_http... yes
> checking for --enable-protocol_ftp... yes
> checking for --enable-protocol_file... yes
> checking for --enable-threads... yes
> checking for --enable-iniconf... no
> checking for --enable-regkey... yes
> checking for --enable-docview... yes
> checking for --enable-help... yes
> checking for --enable-mshtmlhelp... yes
> checking for --enable-html... yes
> checking for --enable-htmlhelp... yes
> checking for --enable-xrc... yes
> checking for --enable-aui... yes
> checking for --enable-propgrid... yes
> checking for --enable-ribbon... yes
> checking for --enable-stc... yes
> checking for --enable-constraints... yes
> checking for --enable-loggui... yes
> checking for --enable-logwin... yes
> checking for --enable-logdialog... yes
> checking for --enable-mdi... yes
> checking for --enable-mdidoc... yes
> checking for --enable-mediactrl... auto
> checking for --enable-gstreamer8... no
> checking for --enable-richtext... yes
> checking for --enable-postscript... yes
> checking for --enable-printarch... yes
> checking for --enable-svg... yes
> checking for --enable-webkit... yes
> checking for --enable-webview... yes
> checking for --enable-graphics_ctx... yes
> checking for --enable-clipboard... yes
> checking for --enable-dnd... yes
> checking for --disable-controls... no
> checking for --enable-markup... yes
> checking for --enable-accel... yes
> checking for --enable-animatectrl... yes
> checking for --enable-bannerwindow... yes
> checking for --enable-artstd... yes
> checking for --enable-arttango... auto
> checking for --enable-bmpbutton... yes
> checking for --enable-bmpcombobox... yes
> checking for --enable-button... yes
> checking for --enable-calendar... yes
> checking for --enable-caret... yes
> checking for --enable-checkbox... yes
> checking for --enable-checklst... yes
> checking for --enable-choice... yes
> checking for --enable-choicebook... yes
> checking for --enable-collpane... yes
> checking for --enable-colourpicker... yes
> checking for --enable-combobox... yes
> checking for --enable-comboctrl... yes
> checking for --enable-commandlinkbutton... yes
> checking for --enable-dataviewctrl... yes
> checking for --enable-datepick... yes
> checking for --enable-detect_sm... yes
> checking for --enable-dirpicker... yes
> checking for --enable-display... yes
> checking for --enable-editablebox... yes
> checking for --enable-filectrl... yes
> checking for --enable-filepicker... yes
> checking for --enable-fontpicker... yes
> checking for --enable-gauge... yes
> checking for --enable-grid... yes
> checking for --enable-headerctrl... yes
> checking for --enable-hyperlink... yes
> checking for --enable-imaglist... yes
> checking for --enable-infobar... yes
> checking for --enable-listbook... yes
> checking for --enable-listbox... yes
> checking for --enable-listctrl... yes
> checking for --enable-notebook... yes
> checking for --enable-notifmsg... yes
> checking for --enable-odcombobox... yes
> checking for --enable-popupwin... yes
> checking for --enable-prefseditor... yes
> checking for --enable-radiobox... yes
> checking for --enable-radiobtn... yes
> checking for --enable-richmsgdlg... yes
> checking for --enable-richtooltip... yes
> checking for --enable-rearrangectrl... yes
> checking for --enable-sash... yes
> checking for --enable-scrollbar... yes
> checking for --enable-searchctrl... yes
> checking for --enable-slider... yes
> checking for --enable-spinbtn... yes
> checking for --enable-spinctrl... yes
> checking for --enable-splitter... yes
> checking for --enable-statbmp... yes
> checking for --enable-statbox... yes
> checking for --enable-statline... yes
> checking for --enable-stattext... yes
> checking for --enable-statusbar... yes
> checking for --enable-taskbaricon... yes
> checking for --enable-tbarnative... yes
> checking for --enable-textctrl... yes
> checking for --enable-timepick... yes
> checking for --enable-tipwindow... yes
> checking for --enable-togglebtn... yes
> checking for --enable-toolbar... yes
> checking for --enable-toolbook... yes
> checking for --enable-treebook... yes
> checking for --enable-treectrl... yes
> checking for --enable-treelist... yes
> checking for --enable-commondlg... yes
> checking for --enable-aboutdlg... yes
> checking for --enable-choicedlg... yes
> checking for --enable-coldlg... yes
> checking for --enable-filedlg... yes
> checking for --enable-finddlg... yes
> checking for --enable-fontdlg... yes
> checking for --enable-dirdlg... yes
> checking for --enable-msgdlg... yes
> checking for --enable-numberdlg... yes
> checking for --enable-splash... yes
> checking for --enable-textdlg... yes
> checking for --enable-tipdlg... yes
> checking for --enable-progressdlg... yes
> checking for --enable-wizarddlg... yes
> checking for --enable-menus... yes
> checking for --enable-miniframe... yes
> checking for --enable-tooltips... yes
> checking for --enable-splines... yes
> checking for --enable-mousewheel... yes
> checking for --enable-validators... yes
> checking for --enable-busyinfo... yes
> checking for --enable-hotkey... auto
> checking for --enable-joystick... yes
> checking for --enable-metafile... auto
> checking for --enable-dragimage... yes
> checking for --enable-accessibility... no
> checking for --enable-uiactionsim... yes
> checking for --enable-dctransform... yes
> checking for --enable-webviewwebkit... yes
> checking for --enable-palette... yes
> checking for --enable-image... yes
> checking for --enable-gif... yes
> checking for --enable-pcx... yes
> checking for --enable-tga... yes
> checking for --enable-iff... yes
> checking for --enable-pnm... yes
> checking for --enable-xpm... yes
> checking for --enable-ico_cur... yes
> checking for --enable-dccache... yes
> checking for --enable-ps-in-msw... yes
> checking for --enable-ownerdrawn... yes
> checking for --enable-uxtheme... yes
> checking for --enable-wxdib... yes
> checking for --enable-webviewie... yes
> checking for --enable-autoidman... yes
> checking for gcc... gcc
> checking whether the C compiler works... yes
> checking for C compiler default output file name... a.out
> checking for suffix of executables...
> checking whether we are cross compiling... no
> checking for suffix of object files... o
> checking whether we are using the GNU C compiler... yes
> checking whether gcc accepts -g... yes
> checking for gcc option to accept ISO C89... none needed
> checking whether we are using the Intel C compiler... no
> checking how to run the C preprocessor... gcc -E
> checking for grep that handles long lines and -e... /bin/grep
> checking for egrep... /bin/grep -E
> checking whether gcc needs -traditional... no
> checking for g++... g++
> checking whether we are using the GNU C++ compiler... yes
> checking whether g++ accepts -g... yes
> checking whether we are using the Intel C++ compiler... no
> checking whether we are using the Sun C++ compiler... no
> checking for ar... ar
> checking for ANSI C header files... yes
> checking for sys/types.h... yes
> checking for sys/stat.h... yes
> checking for stdlib.h... yes
> checking for string.h... yes
> checking for memory.h... yes
> checking for strings.h... yes
> checking for inttypes.h... yes
> checking for stdint.h... yes
> checking for unistd.h... yes
> checking for langinfo.h... yes
> checking for wchar.h... yes
> checking for sys/select.h... yes
> checking for cxxabi.h... yes
> checking for an ANSI C-conforming const... yes
> checking for inline... inline
> checking size of short... 2
> checking size of void *... 8
> checking size of int... 4
> checking size of long... 8
> checking size of size_t... 8
> checking size of long long... 8
> checking size of wchar_t... 4
> checking for va_copy... yes
> checking whether the compiler supports variadic macros... yes
> checking for _FILE_OFFSET_BITS value needed for large files... 64
> checking if large file support is available... yes
> checking for _LARGEFILE_SOURCE value needed for large files... no
> checking whether byte ordering is bigendian... no
> checking for iostream... yes
> checking if C++ compiler supports the explicit keyword... yes
> checking for std::wstring in <string>... yes
> checking for std::istream... yes
> checking for std::ostream... yes
> checking how to run the C++ preprocessor... g++ -E
> checking type_traits usability... yes
> checking type_traits presence... yes
> checking for type_traits... yes
> checking for __sync_fetch_and_add and __sync_sub_and_fetch
> builtins... yes
> checking for libraries directories... /usr/lib64
> checking for cos... no
> checking for floor... no
> checking if floating point functions link without -lm... no
> checking for sin... yes
> checking for ceil... yes
> checking if floating point functions link with -lm... yes
> checking for strtoull... yes
> checking for pkg-config... /usr/bin/pkg-config
> checking pkg-config is at least version 0.9.0... yes
> configure: WARNING: Defaulting to the builtin regex library for
> Unicode build.
> checking for zlib.h >= 1.1.4... no
> checking for zlib.h... (cached) no
> configure: WARNING: zlib library not found or too old, will use
> built-in instead
> checking for png.h > 0.90... no
> checking for png.h... (cached) no
> configure: WARNING: system png library not found or too old, will
> use built-in instead
> checking for jpeglib.h... no
> configure: WARNING: system jpeg library not found, will use
> built-in instead
> checking for tiffio.h... no
> configure: WARNING: system tiff library not found, will use
> built-in instead
> checking for lzma_code in -llzma... no
> checking for jbg_dec_init in -ljbig... no
> checking for expat.h... no
> configure: WARNING: system expat library not found, will use
> built-in instead
> checking for GTK+ version...
> checking for pkg-config... /usr/bin/pkg-config
> checking for GTK+ - version >= 3.0.0... Package gtk+-3.0 was not
> found in the pkg-config search path.
> Perhaps you should add the directory containing `gtk+-3.0.pc'
> to the PKG_CONFIG_PATH environment variable
> No package 'gtk+-3.0' found
> Package gthread-2.0 was not found in the pkg-config search path.
> Perhaps you should add the directory containing `gthread-2.0.pc'
> to the PKG_CONFIG_PATH environment variable
> No package 'gthread-2.0' found
> no
> *** Could not run GTK+ test program, checking why...
> *** The test program failed to compile or link. See the file
> config.log for the
> *** exact error that occured. This usually means GTK+ is
> incorrectly installed.
> configure: error:
> The development files for GTK+ were not found. For GTK+ 2, please
> ensure that pkg-config is in the path and that gtk+-2.0.pc is
> installed. For GTK+ 1.2 please check that gtk-config is in the path,
> and that the version is 1.2.3 or above. Also check that the
> libraries returned by 'pkg-config gtk+-2.0 --libs' or 'gtk-config
> --libs' are in the LD_LIBRARY_PATH or equivalent.
>
> Error running configure
> ERROR: failed building wxWidgets
> Traceback (most recent call last):
> File "build.py", line 1468, in cmd_build_wx
> wxbuild.main(wxDir(), build_options)
> File
> "/tmp/pip-install-9ry95jz4/wxpython/buildtools/build_wxwidgets.py",
> line 372, in main
> "Error running configure")
> File
> "/tmp/pip-install-9ry95jz4/wxpython/buildtools/build_wxwidgets.py",
> line 85, in exitIfError
> raise builder.BuildError(msg)
> buildtools.builder.BuildError: Error running configure
> Finished command: build_wx (0m12.378s)
> Finished command: build (0m12.378s)
> Command '"/usr/bin/python3" -u build.py build' failed with exit
> code 1.
> ----------------------------------------
> ERROR: Command "/usr/bin/python3 -u -c 'import setuptools,
> tokenize;__file__='"'"'/tmp/pip-install-9ry95jz4/wxpython/setup.py'"'"';f=getattr(tokenize,
> '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"',
> '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))'
> install --record /tmp/pip-record-jws6rto1/install-record.txt
> --single-version-externally-managed --compile" failed with error code
> 1 in /tmp/pip-install-9ry95jz4/wxpython/
>
> So, what's missing?
>
> On Thu, Feb 13, 2020 at 10:16 AM <[email protected]
> <mailto:[email protected]>> wrote:
>
> [email protected]
> <https://groups.google.com/forum/?utm_source=digest&utm_medium=email#!forum/wxpython-users/topics>
> Google Groups
> <https://groups.google.com/forum/?utm_source=digest&utm_medium=email/#!overview>
> <https://groups.google.com/forum/?utm_source=digest&utm_medium=email/#!overview>
>
> Topic digest
> View all topics
> <https://groups.google.com/forum/?utm_source=digest&utm_medium=email#!forum/wxpython-users/topics>
>
>
> * wxPython3 and wxPython4 (Phoenix)
> <#m_7310600135072185183_group_thread_0> - 4 Updates
>
> wxPython3 and wxPython4 (Phoenix)
> <http://groups.google.com/group/wxpython-users/t/b8a3f8c029470706?utm_source=digest&utm_medium=email>
>
> drednot57 <[email protected] <mailto:[email protected]>>:
> Feb 13 02:35AM -0800
>
> Is it possible for wxPython3 and wxPython4 to coexist in a single
> Linux
> distro?
> The creator of my distro replied on the forum about why wxPython4
> is not
> available in the repos:
>
> wxPython 4 is not in the repo because there is nothing that
> depends on it.
>
> wxPython 4 requires a different python sip package which may break
> existing
> wxPython 3 and apps that depend on wxPython 3.
>
> wxPython 4 requires a special private sip library to be built.
>
> # wxPython upstream uses a private sip module, wx.siplib, and
> bundles the
> # siplib code. It's not possible to build this siplib because the
> source
> code
> # for sipgen is not included.
>
> In summary wxPython 4 is a time consuming PITA to manufacture
> packages
> based on it at this time. I don't know how to tell you to build
> and install
> it.
>
> Is there a way to install wxPython4 without breaking wxPython3,
> and any app
> dependencies?
> Matt Newville <[email protected]
> <mailto:[email protected]>>: Feb 13 07:40AM -0600
>
> > it.
>
> > Is there a way to install wxPython4 without breaking wxPython3,
> and any
> > app dependencies?
>
> Use a different Python environment that doesn't clobber
> system-wide files.
> For example, Anaconda Python is easy to install into a user's home
> folder
> or into /opt and has a wxpython4 package ready to install and use.
>
> --Matt
> Scott Talbert <[email protected] <mailto:[email protected]>>: Feb 13
> 09:13AM -0500
>
> On Thu, 13 Feb 2020, drednot57 wrote:
>
> > on it at this time. I don't know how to tell you to build and
> install it.
>
> > Is there a way to install wxPython4 without breaking wxPython3,
> and any app
> > dependencies?
>
> Yes, it is possible! Debian & Ubuntu have both wxPython3 (Python
> 2) and
> wxPython4 (Python 3) right now, although wxPython3 will be removed
> soon.
> If you wanted to install a Python 2 version of wxPython4 at the
> same time
> as wxPython3, that might be more problematic, but I don't know why
> you
> would want that.
>
> It is also possible to unbundle the copy of sip that wxPython4
> provides.
> I am doing that in both Debian and Fedora, although in different
> ways in
> each.
>
> Which distribution are you using?
>
> Scott
> johnf <[email protected] <mailto:[email protected]>>:
> Feb 13 06:28AM -0800
>
> On 2/13/20 2:35 AM, drednot57 wrote:
> > To view this discussion on the web visit
> >
> https://groups.google.com/d/msgid/wxpython-users/54d731b9-82bc-430b-904e-bd74468eae1a%40googlegroups.com
>
> >
> <https://groups.google.com/d/msgid/wxpython-users/54d731b9-82bc-430b-904e-bd74468eae1a%40googlegroups.com?utm_medium=email&utm_source=footer>.
>
> At the moment that is very easy using OpenSuse 15.0 or OpenSuse 15.1.
> The distro has both python 2.7 and python 3.6 installed. And both
> wxPython 3.x and wxPython 4.x are available using YAST.
>
> Johnf
>
> Back to top <#m_7310600135072185183_digest_top>
> You received this digest because you're subscribed to updates for
> this group. You can change your settings on the group membership
> page
> <https://groups.google.com/forum/?utm_source=digest&utm_medium=email#!forum/wxpython-users/join>.
> To unsubscribe from this group and stop receiving emails from it
> send an email to [email protected]
> <mailto:[email protected]>.
>
> --
> You received this message because you are subscribed to the Google
> Groups "wxPython-users" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to [email protected]
> <mailto:[email protected]>.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/wxpython-users/CAGFP5%2BJGAtebx8ACa-ZSj0mo%3Dc9fk-%2BDLoCTopB%3DZamE5jR7_Q%40mail.gmail.com
> <https://groups.google.com/d/msgid/wxpython-users/CAGFP5%2BJGAtebx8ACa-ZSj0mo%3Dc9fk-%2BDLoCTopB%3DZamE5jR7_Q%40mail.gmail.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the Google Groups "wxPython-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/wxpython-users/6fa8b45d-53b8-2922-5945-1a9444dbeba2%40gmail.com.