Re: Digest for [email protected] - 4 updates in 1 topic

Daniel Presley <[email protected]> Sat, 15 Feb 2020 12:06:37 -0600
Newsgroups	gmane.comp.python.wxpython
Message-ID	<CAGFP5+JGAtebx8ACa-ZSj0mo=c9fk-+DLoCTopB=ZamE5jR7_Q@mail.gmail.com>
I tried using PIP and failed.  This is the output I got:

[dan@localhost ~]$ pip install wxpython
Collecting wxpython
  Using cached
https://files.pythonhosted.org/packages/b9/8b/31267dd6d026a082faed35ec8d97522c0236f2e083bf15aff64d982215e1/wxPython-4.0.7.post2.tar.gz
Requirement already satisfied: pillow in /usr/lib64/python3.6/site-packages
(from wxpython) (5.1.0)
Requirement already satisfied: six in /usr/lib/python3.6/site-packages
(from wxpython) (1.11.0)
Requirement already satisfied: numpy in
./.local/lib/python3.6/site-packages (from wxpython) (1.18.1)
Installing collected packages: wxpython
  Running setup.py install for wxpython ... error
    ERROR: Complete output from command /usr/bin/python3 -u -c 'import
setuptools,
tokenize;__file__='"'"'/tmp/pip-install-9ry95jz4/wxpython/setup.py'"'"';f=getattr(tokenize,
'"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"',
'"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))'
install --record /tmp/pip-record-jws6rto1/install-record.txt
--single-version-externally-managed --compile:
    ERROR: running install
    running build
    WARNING: Building this way assumes that all generated files have been
    generated already.  If that is not the case then use build.py directly
    to generate the source and perform the build stage.  You can use
    --skip-build with the bdist_* or install commands to avoid this
    message and the wxWidgets and Phoenix build steps in the future.

    "/usr/bin/python3" -u build.py build

    Will build using: "/usr/bin/python3"

    3.6.5 (default, Jan 16 2019, 21:12:16)

    [GCC 7.3.0]

    Python's architecture is 64bit

    cfg.VERSION: 4.0.7.post2



    Running command: build

    Running command: build_wx

    wxWidgets build options: ['--wxpython', '--unicode', '--gtk3']

    Configure options: ['--enable-unicode', '--with-gtk=3',
'--enable-sound', '--enable-graphics_ctx', '--enable-display',
'--enable-geometry', '--enable-debug_flag', '--enable-optimise',
'--disable-debugreport', '--enable-uiactionsim', '--enable-autoidman',
'--with-sdl']

    /tmp/pip-install-9ry95jz4/wxpython/ext/wxWidgets/configure
--enable-unicode --with-gtk=3 --enable-sound --enable-graphics_ctx
--enable-display --enable-geometry --enable-debug_flag --enable-optimise
--disable-debugreport --enable-uiactionsim --enable-autoidman --with-sdl


    checking build system type... x86_64-pc-linux-gnu

    checking host system type... x86_64-pc-linux-gnu

    checking for --disable-gui... no

    checking for --enable-monolithic... no

    checking for --enable-plugins... no

    checking for --without-subdirs... no

    checking for --enable-official_build... no

    checking for --disable-all-features... no

    checking for --enable-universal... no

    checking for --enable-nanox... no

    checking for --enable-gpe... no

    checking for toolkit... gtk

    checking for --with-libpng... yes

    checking for --with-libjpeg... yes

    checking for --with-libtiff... yes

    checking for --without-libjbig... no

    checking for --without-liblzma... no

    checking for --with-libxpm... yes

    checking for --with-libiconv... yes

    checking for --with-libmspack... no

    checking for --without-gtkprint... no

    checking for --with-gnomevfs... no

    checking for --with-libnotify... yes

    checking for --with-hildon... no

    checking for --with-opengl... auto

    checking for --with-dmalloc... no

    checking for --with-sdl... yes

    checking for --with-regex... yes

    checking for --with-zlib... yes

    checking for --with-expat... yes

    checking for --with-macosx-sdk...

    checking for --with-macosx-version-min...

    checking for --enable-debug... default

    checking for --disable-debug_flag... no

    checking for --enable-debug_info... no

    checking for --enable-debug_gdb... no

    checking for --enable-debug_cntxt... no

    checking for --enable-mem_tracing... no

    checking for --disable-shared... no

    checking for --enable-stl... no

    checking for --enable-std_containers... no

    checking for --enable-std_iostreams... yes

    checking for --enable-std_string... yes

    checking for --enable-std_string_conv_in_wxstring... no

    checking for --disable-unicode... no

    checking for --enable-mslu... no

    checking for --enable-utf8... no

    checking for --enable-utf8only... no

    checking for --enable-extended_rtti... no

    checking for --disable-optimise... no

    checking for --enable-profile... no

    checking for --enable-no_rtti... no

    checking for --enable-no_exceptions... no

    checking for --enable-permissive... no

    checking for --enable-no_deps... no

    checking for --disable-vararg_macros... no

    checking for --enable-universal_binary... no

    checking for --enable-macosx_arch... no

    checking for --enable-compat26... no

    checking for --disable-compat28... no

    checking for --disable-rpath... no

    checking for --enable-objc_uniquifying... no

    checking for --disable-visibility... no

    checking for --disable-tls... no

    checking for --enable-intl... yes

    checking for --enable-xlocale... yes

    checking for --enable-config... yes

    checking for --enable-protocols... yes

    checking for --enable-ftp... yes

    checking for --enable-http... yes

    checking for --enable-fileproto... yes

    checking for --enable-sockets... yes

    checking for --enable-ipv6... no

    checking for --enable-ole... yes

    checking for --enable-dataobj... yes

    checking for --enable-ipc... yes

    checking for --enable-baseevtloop... yes

    checking for --enable-epollloop... yes

    checking for --enable-selectloop... yes

    checking for --enable-any... yes

    checking for --enable-apple_ieee... yes

    checking for --enable-arcstream... yes

    checking for --enable-base64... yes

    checking for --enable-backtrace... yes

    checking for --enable-catch_segvs... yes

    checking for --enable-cmdline... yes

    checking for --enable-datetime... yes

    checking for --enable-debugreport... no

    checking for --enable-dialupman... yes

    checking for --enable-dynlib... yes

    checking for --enable-dynamicloader... yes

    checking for --enable-exceptions... yes

    checking for --enable-ffile... yes

    checking for --enable-file... yes

    checking for --enable-filehistory... yes

    checking for --enable-filesystem... yes

    checking for --enable-fontenum... yes

    checking for --enable-fontmap... yes

    checking for --enable-fs_archive... yes

    checking for --enable-fs_inet... yes

    checking for --enable-fs_zip... yes

    checking for --enable-fsvolume... yes

    checking for --enable-fswatcher... yes

    checking for --enable-geometry... yes

    checking for --enable-log... yes

    checking for --enable-longlong... yes

    checking for --enable-mimetype... yes

    checking for --enable-printfposparam... yes

    checking for --enable-snglinst... yes

    checking for --enable-sound... yes

    checking for --enable-stdpaths... yes

    checking for --enable-stopwatch... yes

    checking for --enable-streams... yes

    checking for --enable-sysoptions... yes

    checking for --enable-tarstream... yes

    checking for --enable-textbuf... yes

    checking for --enable-textfile... yes

    checking for --enable-timer... yes

    checking for --enable-variant... yes

    checking for --enable-zipstream... yes

    checking for --enable-url... yes

    checking for --enable-protocol... yes

    checking for --enable-protocol_http... yes

    checking for --enable-protocol_ftp... yes

    checking for --enable-protocol_file... yes

    checking for --enable-threads... yes

    checking for --enable-iniconf... no

    checking for --enable-regkey... yes

    checking for --enable-docview... yes

    checking for --enable-help... yes

    checking for --enable-mshtmlhelp... yes

    checking for --enable-html... yes

    checking for --enable-htmlhelp... yes

    checking for --enable-xrc... yes

    checking for --enable-aui... yes

    checking for --enable-propgrid... yes

    checking for --enable-ribbon... yes

    checking for --enable-stc... yes

    checking for --enable-constraints... yes

    checking for --enable-loggui... yes

    checking for --enable-logwin... yes

    checking for --enable-logdialog... yes

    checking for --enable-mdi... yes

    checking for --enable-mdidoc... yes

    checking for --enable-mediactrl... auto

    checking for --enable-gstreamer8... no

    checking for --enable-richtext... yes

    checking for --enable-postscript... yes

    checking for --enable-printarch... yes

    checking for --enable-svg... yes

    checking for --enable-webkit... yes

    checking for --enable-webview... yes

    checking for --enable-graphics_ctx... yes

    checking for --enable-clipboard... yes

    checking for --enable-dnd... yes

    checking for --disable-controls... no

    checking for --enable-markup... yes

    checking for --enable-accel... yes

    checking for --enable-animatectrl... yes

    checking for --enable-bannerwindow... yes

    checking for --enable-artstd... yes

    checking for --enable-arttango... auto

    checking for --enable-bmpbutton... yes

    checking for --enable-bmpcombobox... yes

    checking for --enable-button... yes

    checking for --enable-calendar... yes

    checking for --enable-caret... yes

    checking for --enable-checkbox... yes

    checking for --enable-checklst... yes

    checking for --enable-choice... yes

    checking for --enable-choicebook... yes

    checking for --enable-collpane... yes

    checking for --enable-colourpicker... yes

    checking for --enable-combobox... yes

    checking for --enable-comboctrl... yes

    checking for --enable-commandlinkbutton... yes

    checking for --enable-dataviewctrl... yes

    checking for --enable-datepick... yes

    checking for --enable-detect_sm... yes

    checking for --enable-dirpicker... yes

    checking for --enable-display... yes

    checking for --enable-editablebox... yes

    checking for --enable-filectrl... yes

    checking for --enable-filepicker... yes

    checking for --enable-fontpicker... yes

    checking for --enable-gauge... yes

    checking for --enable-grid... yes

    checking for --enable-headerctrl... yes

    checking for --enable-hyperlink... yes

    checking for --enable-imaglist... yes

    checking for --enable-infobar... yes

    checking for --enable-listbook... yes

    checking for --enable-listbox... yes

    checking for --enable-listctrl... yes

    checking for --enable-notebook... yes

    checking for --enable-notifmsg... yes

    checking for --enable-odcombobox... yes

    checking for --enable-popupwin... yes

    checking for --enable-prefseditor... yes

    checking for --enable-radiobox... yes

    checking for --enable-radiobtn... yes

    checking for --enable-richmsgdlg... yes

    checking for --enable-richtooltip... yes

    checking for --enable-rearrangectrl... yes

    checking for --enable-sash... yes

    checking for --enable-scrollbar... yes

    checking for --enable-searchctrl... yes

    checking for --enable-slider... yes

    checking for --enable-spinbtn... yes

    checking for --enable-spinctrl... yes

    checking for --enable-splitter... yes

    checking for --enable-statbmp... yes

    checking for --enable-statbox... yes

    checking for --enable-statline... yes

    checking for --enable-stattext... yes

    checking for --enable-statusbar... yes

    checking for --enable-taskbaricon... yes

    checking for --enable-tbarnative... yes

    checking for --enable-textctrl... yes

    checking for --enable-timepick... yes

    checking for --enable-tipwindow... yes

    checking for --enable-togglebtn... yes

    checking for --enable-toolbar... yes

    checking for --enable-toolbook... yes

    checking for --enable-treebook... yes

    checking for --enable-treectrl... yes

    checking for --enable-treelist... yes

    checking for --enable-commondlg... yes

    checking for --enable-aboutdlg... yes

    checking for --enable-choicedlg... yes

    checking for --enable-coldlg... yes

    checking for --enable-filedlg... yes

    checking for --enable-finddlg... yes

    checking for --enable-fontdlg... yes

    checking for --enable-dirdlg... yes

    checking for --enable-msgdlg... yes

    checking for --enable-numberdlg... yes

    checking for --enable-splash... yes

    checking for --enable-textdlg... yes

    checking for --enable-tipdlg... yes

    checking for --enable-progressdlg... yes

    checking for --enable-wizarddlg... yes

    checking for --enable-menus... yes

    checking for --enable-miniframe... yes

    checking for --enable-tooltips... yes

    checking for --enable-splines... yes

    checking for --enable-mousewheel... yes

    checking for --enable-validators... yes

    checking for --enable-busyinfo... yes

    checking for --enable-hotkey... auto

    checking for --enable-joystick... yes

    checking for --enable-metafile... auto

    checking for --enable-dragimage... yes

    checking for --enable-accessibility... no

    checking for --enable-uiactionsim... yes

    checking for --enable-dctransform... yes

    checking for --enable-webviewwebkit... yes

    checking for --enable-palette... yes

    checking for --enable-image... yes

    checking for --enable-gif... yes

    checking for --enable-pcx... yes

    checking for --enable-tga... yes

    checking for --enable-iff... yes

    checking for --enable-pnm... yes

    checking for --enable-xpm... yes

    checking for --enable-ico_cur... yes

    checking for --enable-dccache... yes

    checking for --enable-ps-in-msw... yes

    checking for --enable-ownerdrawn... yes

    checking for --enable-uxtheme... yes

    checking for --enable-wxdib... yes

    checking for --enable-webviewie... yes

    checking for --enable-autoidman... yes

    checking for gcc... gcc

    checking whether the C compiler works... yes

    checking for C compiler default output file name... a.out

    checking for suffix of executables...

    checking whether we are cross compiling... no

    checking for suffix of object files... o

    checking whether we are using the GNU C compiler... yes

    checking whether gcc accepts -g... yes

    checking for gcc option to accept ISO C89... none needed

    checking whether we are using the Intel C compiler... no

    checking how to run the C preprocessor... gcc -E

    checking for grep that handles long lines and -e... /bin/grep

    checking for egrep... /bin/grep -E

    checking whether gcc needs -traditional... no

    checking for g++... g++

    checking whether we are using the GNU C++ compiler... yes

    checking whether g++ accepts -g... yes

    checking whether we are using the Intel C++ compiler... no

    checking whether we are using the Sun C++ compiler... no

    checking for ar... ar

    checking for ANSI C header files... yes

    checking for sys/types.h... yes

    checking for sys/stat.h... yes

    checking for stdlib.h... yes

    checking for string.h... yes

    checking for memory.h... yes

    checking for strings.h... yes

    checking for inttypes.h... yes

    checking for stdint.h... yes

    checking for unistd.h... yes

    checking for langinfo.h... yes

    checking for wchar.h... yes

    checking for sys/select.h... yes

    checking for cxxabi.h... yes

    checking for an ANSI C-conforming const... yes

    checking for inline... inline

    checking size of short... 2

    checking size of void *... 8

    checking size of int... 4

    checking size of long... 8

    checking size of size_t... 8

    checking size of long long... 8

    checking size of wchar_t... 4

    checking for va_copy... yes

    checking whether the compiler supports variadic macros... yes

    checking for _FILE_OFFSET_BITS value needed for large files... 64

    checking if large file support is available... yes

    checking for _LARGEFILE_SOURCE value needed for large files... no

    checking whether byte ordering is bigendian... no

    checking for iostream... yes

    checking if C++ compiler supports the explicit keyword... yes

    checking for std::wstring in <string>... yes

    checking for std::istream... yes

    checking for std::ostream... yes

    checking how to run the C++ preprocessor... g++ -E

    checking type_traits usability... yes

    checking type_traits presence... yes

    checking for type_traits... yes

    checking for __sync_fetch_and_add and __sync_sub_and_fetch builtins...
yes
    checking for libraries directories... /usr/lib64

    checking for cos... no

    checking for floor... no

    checking if floating point functions link without -lm... no

    checking for sin... yes

    checking for ceil... yes

    checking if floating point functions link with -lm... yes

    checking for strtoull... yes

    checking for pkg-config... /usr/bin/pkg-config

    checking pkg-config is at least version 0.9.0... yes

    configure: WARNING: Defaulting to the builtin regex library for Unicode
build.
    checking for zlib.h >= 1.1.4... no

    checking for zlib.h... (cached) no

    configure: WARNING: zlib library not found or too old, will use
built-in instead
    checking for png.h > 0.90... no

    checking for png.h... (cached) no

    configure: WARNING: system png library not found or too old, will use
built-in instead
    checking for jpeglib.h... no

    configure: WARNING: system jpeg library not found, will use built-in
instead
    checking for tiffio.h... no

    configure: WARNING: system tiff library not found, will use built-in
instead
    checking for lzma_code in -llzma... no

    checking for jbg_dec_init in -ljbig... no

    checking for expat.h... no

    configure: WARNING: system expat library not found, will use built-in
instead
    checking for GTK+ version...

    checking for pkg-config... /usr/bin/pkg-config

    checking for GTK+ - version >= 3.0.0... Package gtk+-3.0 was not found
in the pkg-config search path.
    Perhaps you should add the directory containing `gtk+-3.0.pc'

    to the PKG_CONFIG_PATH environment variable

    No package 'gtk+-3.0' found

    Package gthread-2.0 was not found in the pkg-config search path.

    Perhaps you should add the directory containing `gthread-2.0.pc'

    to the PKG_CONFIG_PATH environment variable

    No package 'gthread-2.0' found

    no

    *** Could not run GTK+ test program, checking why...

    *** The test program failed to compile or link. See the file config.log
for the
    *** exact error that occured. This usually means GTK+ is incorrectly
installed.
    configure: error:

    The development files for GTK+ were not found. For GTK+ 2, please
    ensure that pkg-config is in the path and that gtk+-2.0.pc is
    installed. For GTK+ 1.2 please check that gtk-config is in the path,
    and that the version is 1.2.3 or above. Also check that the
    libraries returned by 'pkg-config gtk+-2.0 --libs' or 'gtk-config
    --libs' are in the LD_LIBRARY_PATH or equivalent.

    Error running configure
    ERROR: failed building wxWidgets
    Traceback (most recent call last):
      File "build.py", line 1468, in cmd_build_wx
        wxbuild.main(wxDir(), build_options)
      File
"/tmp/pip-install-9ry95jz4/wxpython/buildtools/build_wxwidgets.py", line
372, in main
        "Error running configure")
      File
"/tmp/pip-install-9ry95jz4/wxpython/buildtools/build_wxwidgets.py", line
85, in exitIfError
        raise builder.BuildError(msg)
    buildtools.builder.BuildError: Error running configure
    Finished command: build_wx (0m12.378s)
    Finished command: build (0m12.378s)
    Command '"/usr/bin/python3" -u build.py build' failed with exit code 1.
    ----------------------------------------
ERROR: Command "/usr/bin/python3 -u -c 'import setuptools,
tokenize;__file__='"'"'/tmp/pip-install-9ry95jz4/wxpython/setup.py'"'"';f=getattr(tokenize,
'"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"',
'"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))'
install --record /tmp/pip-record-jws6rto1/install-record.txt
--single-version-externally-managed --compile" failed with error code 1 in
/tmp/pip-install-9ry95jz4/wxpython/

So, what's missing?

On Thu, Feb 13, 2020 at 10:16 AM <[email protected]> wrote:

> [email protected]
> <https://groups.google.com/forum/?utm_source=digest&utm_medium=email#!forum/wxpython-users/topics> Google
> Groups
> <https://groups.google.com/forum/?utm_source=digest&utm_medium=email/#!overview>
> <https://groups.google.com/forum/?utm_source=digest&utm_medium=email/#!overview>
> Topic digest
> View all topics
> <https://groups.google.com/forum/?utm_source=digest&utm_medium=email#!forum/wxpython-users/topics>
>
>    - wxPython3 and wxPython4 (Phoenix)
>    <#m_7310600135072185183_group_thread_0> - 4 Updates
>
> wxPython3 and wxPython4 (Phoenix)
> <http://groups.google.com/group/wxpython-users/t/b8a3f8c029470706?utm_source=digest&utm_medium=email>
> drednot57 <[email protected]>: Feb 13 02:35AM -0800
>
> Is it possible for wxPython3 and wxPython4 to coexist in a single Linux
> distro?
> The creator of my distro replied on the forum about why wxPython4 is not
> available in the repos:
>
> wxPython 4 is not in the repo because there is nothing that depends on it.
>
> wxPython 4 requires a different python sip package which may break
> existing
> wxPython 3 and apps that depend on wxPython 3.
>
> wxPython 4 requires a special private sip library to be built.
>
> # wxPython upstream uses a private sip module, wx.siplib, and bundles the
> # siplib code. It's not possible to build this siplib because the source
> code
> # for sipgen is not included.
>
> In summary wxPython 4 is a time consuming PITA to manufacture packages
> based on it at this time. I don't know how to tell you to build and
> install
> it.
>
> Is there a way to install wxPython4 without breaking wxPython3, and any
> app
> dependencies?
> Matt Newville <[email protected]>: Feb 13 07:40AM -0600
>
> > it.
>
> > Is there a way to install wxPython4 without breaking wxPython3, and any
> > app dependencies?
>
> Use a different Python environment that doesn't clobber system-wide files.
> For example, Anaconda Python is easy to install into a user's home folder
> or into /opt and has a wxpython4 package ready to install and use.
>
> --Matt
> Scott Talbert <[email protected]>: Feb 13 09:13AM -0500
>
> On Thu, 13 Feb 2020, drednot57 wrote:
>
> > on it at this time. I don't know how to tell you to build and install it.
>
> > Is there a way to install wxPython4 without breaking wxPython3, and any
> app
> > dependencies?
>
> Yes, it is possible! Debian & Ubuntu have both wxPython3 (Python 2) and
> wxPython4 (Python 3) right now, although wxPython3 will be removed soon.
> If you wanted to install a Python 2 version of wxPython4 at the same time
> as wxPython3, that might be more problematic, but I don't know why you
> would want that.
>
> It is also possible to unbundle the copy of sip that wxPython4 provides.
> I am doing that in both Debian and Fedora, although in different ways in
> each.
>
> Which distribution are you using?
>
> Scott
> johnf <[email protected]>: Feb 13 06:28AM -0800
>
> On 2/13/20 2:35 AM, drednot57 wrote:
> > To view this discussion on the web visit
> >
> https://groups.google.com/d/msgid/wxpython-users/54d731b9-82bc-430b-904e-bd74468eae1a%40googlegroups.com
> > <
> https://groups.google.com/d/msgid/wxpython-users/54d731b9-82bc-430b-904e-bd74468eae1a%40googlegroups.com?utm_medium=email&utm_source=footer
> >.
>
> At the moment that is very easy using OpenSuse 15.0 or OpenSuse 15.1.
> The distro has both python 2.7 and python 3.6 installed.  And both
> wxPython 3.x and wxPython 4.x are available using YAST.
>
> Johnf
> Back to top <#m_7310600135072185183_digest_top>
> You received this digest because you're subscribed to updates for this
> group. You can change your settings on the group membership page
> <https://groups.google.com/forum/?utm_source=digest&utm_medium=email#!forum/wxpython-users/join>
> .
> To unsubscribe from this group and stop receiving emails from it send an
> email to [email protected].
>

-- 
You received this message because you are subscribed to the Google Groups "wxPython-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/wxpython-users/CAGFP5%2BJGAtebx8ACa-ZSj0mo%3Dc9fk-%2BDLoCTopB%3DZamE5jR7_Q%40mail.gmail.com.