gtk not found but it is installed - help
Blake S Simpkins <[email protected]> Tue, 8 Apr 2003 12:14:22 -0700 (PDT)
| Newsgroups | gmane.comp.scigraphica.devel |
|---|---|
| Message-ID | <[email protected]> |
hello,
Scigraphicalooks great and I'm eager to use it. I'm an engineer looking
for a plotting/fitting utility with a nice gui. I'm switching over to
linux so please bear with me.
I've installed all of the needed programs. Some as rpms but others from
source because I couldn't find the apropriate rpms (Red Hat 9). Configure
is complaining that it can't find gtk-extra. I installed gtk+extra0.99.17
from source without problem. There is a file
/usr/local/bin/gtkextra-config. I've added this file to ld.so.conf and
run /sbin/ldconfig as suggested by scigraphica's configure but still have
the same errors. I'll past below the output from configure and below that
are the contents of config.log. I know this is probably a simply problem
but a bit of help would be greatly appreciated.
[root@london scigraphica-0.8.0]# ./configure
loading cache ./config.cache
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking build system type... i686-pc-linux-gnu
checking for a BSD compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking whether make sets ${MAKE}... yes
checking for working aclocal... found
checking for working autoconf... found
checking for working automake... found
checking for working autoheader... found
checking for working makeinfo... found
checking for strerror in -lcposix... no
checking for gcc... gcc
checking whether the C compiler (gcc ) works... yes
checking whether the C compiler (gcc ) is a cross-compiler... no
checking whether we are using GNU C... yes
checking whether gcc accepts -g... yes
checking for ranlib... ranlib
checking whether make sets ${MAKE}... (cached) yes
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for Cygwin environment... no
checking for mingw32 environment... no
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognise dependant libraries... pass_all
checking for object suffix... o
checking for executable suffix... no
checking command to parse /usr/bin/nm -B output... ok
checking for dlfcn.h... yes
checking for ranlib... (cached) ranlib
checking for strip... strip
checking for objdir... .libs
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.lo... yes
checking if gcc supports -fno-rtti -fno-exceptions... yes
checking whether the linker (/usr/bin/ld) supports shared libraries... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking if libtool supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
creating libtool
checking for tgoto in -ltermcap... yes
checking for readline in -lreadline... yes
checking for tgoto in -lncurses... yes
checking for rl_free_line_state in -lreadline... yes
checking for xml-config... /usr/bin/xml-config
checking for xmlSAXUserParseFile... yes
checking for imlib-config... /usr/bin/imlib-config
checking for IMLIB - version >= 1.9.7... yes
checking for gtk-config... /usr/bin/gtk-config
checking for GTK - version >= 1.2.0... yes
checking for gtkextra-config... /usr/local/bin/gtkextra-config
checking for GTK_EXTRA - version >= 0.99.17... no
*** Could not run GTK_EXTRA test program, checking why...
*** The test program compiled, but did not run. This usually means
*** that the run-time linker is not finding GTK_EXTRA or finding the wrong
*** version of GTK_EXTRA. If it is not finding GTK_EXTRA, you'll need to
set your
*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point
*** to the installed location Also, make sure you have run ldconfig if
that
*** is required on your system
***
*** If you have an old version installed, it is best to remove it,
although
*** you may also be able to get things to work by modifying
LD_LIBRARY_PATH
***
*** If you have a RedHat 5.0 system, you should remove the GTK_EXTRA
package that
*** came with the system with the command
***
*** rpm --erase --nodeps gtkextra gtkextra-devel
configure: error: Cannot find GTK+EXTRA: Is gtkextra-config in path?
*******************************************************************************
here are the pasted contents of the config.log
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
configure:796: checking host system type
configure:817: checking target system type
configure:835: checking build system type
configure:870: checking for a BSD compatible install
configure:923: checking whether build environment is sane
configure:980: checking whether make sets ${MAKE}
configure:1026: checking for working aclocal
configure:1039: checking for working autoconf
configure:1052: checking for working automake
configure:1065: checking for working autoheader
configure:1078: checking for working makeinfo
configure:1111: checking for strerror in -lcposix
configure:1130: cc -o conftest conftest.c -lcposix 1>&5
/usr/bin/ld: cannot find -lcposix
collect2: ld returned 1 exit status
configure: failed program was:
#line 1119 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char strerror();
int main() {
strerror()
; return 0; }
configure:1155: checking for gcc
configure:1268: checking whether the C compiler (gcc ) works
configure:1284: gcc -o conftest conftest.c 1>&5
configure:1310: checking whether the C compiler (gcc ) is a
cross-compiler
configure:1315: checking whether we are using GNU C
configure:1324: gcc -E conftest.c
configure:1343: checking whether gcc accepts -g
configure:1377: checking for ranlib
configure:1405: checking whether make sets ${MAKE}
configure:1432: checking how to run the C preprocessor
configure:1453: gcc -E conftest.c >/dev/null 2>conftest.out
configure:1512: checking for ANSI C header files
configure:1525: gcc -E conftest.c >/dev/null 2>conftest.out
configure:1592: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1635: checking for Cygwin environment
configure:1651: gcc -c -g -O2 conftest.c 1>&5
configure: In function `main':
configure:1647: `__CYGWIN32__' undeclared (first use in this function)
configure:1647: (Each undeclared identifier is reported only once
configure:1647: for each function it appears in.)
configure: failed program was:
#line 1640 "configure"
#include "confdefs.h"
int main() {
#ifndef __CYGWIN__
#define __CYGWIN__ __CYGWIN32__
#endif
return __CYGWIN__;
; return 0; }
configure:1668: checking for mingw32 environment
configure:1680: gcc -c -g -O2 conftest.c 1>&5
configure: In function `main':
configure:1676: `__MINGW32__' undeclared (first use in this function)
configure:1676: (Each undeclared identifier is reported only once
configure:1676: for each function it appears in.)
configure: failed program was:
#line 1673 "configure"
#include "confdefs.h"
int main() {
return __MINGW32__;
; return 0; }
configure:1777: checking for ld used by GCC
configure:1845: checking if the linker (/usr/bin/ld) is GNU ld
GNU ld version 2.13.90.0.2 20020802
configure:1862: checking for /usr/bin/ld option to reload object files
configure:1874: checking for BSD-compatible nm
configure:1912: checking whether ln -s works
configure:1933: checking how to recognise dependant libraries
configure:2106: checking for object suffix
configure:2112: gcc -c -g -O2 conftest.c 1>&5
configure:2132: checking for executable suffix
configure:2142: gcc -o conftest -g -O2 conftest.c 1>&5
configure:2173: checking command to parse /usr/bin/nm -B output
configure:2249: gcc -c -g -O2 conftest.c 1>&5
configure:2252: /usr/bin/nm -B conftest.o | sed -n -e 's/^.*[
]\([ABCDGISTW][ABCDGISTW]*\)[ ][ ]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3
\3/p' > conftest.nm
configure:2303: gcc -o conftest -g -O2 conftest.c conftstm.o 1>&5
configure:2349: checking for dlfcn.h
configure:2359: gcc -E conftest.c >/dev/null 2>conftest.out
configure:2527: checking for ranlib
configure:2594: checking for strip
configure:2830: checking for objdir
configure:2857: checking for gcc option to produce PIC
configure:3009: checking if gcc PIC flag -fPIC works
configure:3023: gcc -c -g -O2 -fPIC -DPIC conftest.c 1>&5
configure:3075: checking if gcc static flag -static works
configure:3090: gcc -o conftest -g -O2 -static conftest.c 1>&5
configure:3117: checking if gcc supports -c -o file.o
configure:3136: gcc -c -g -O2 -o out/conftest2.o conftest.c 1>&5
configure:3165: checking if gcc supports -c -o file.lo
configure:3181: gcc -c -g -O2 -c -o conftest.lo conftest.c 1>&5
configure:3230: checking if gcc supports -fno-rtti -fno-exceptions
configure:3243: gcc -c -g -O2 -fno-rtti -fno-exceptions -c conftest.c
conftest.c 1>&5
configure:3270: checking whether the linker (/usr/bin/ld) supports shared
libraries
configure:3886: checking how to hardcode library paths into programs
configure:3914: checking whether stripping libraries is possible
configure:3928: checking dynamic linker characteristics
configure:4314: checking if libtool supports shared libraries
configure:4807: checking whether -lc should be explicitly linked in
configure:4814: gcc -c -g -O2 conftest.c 1>&5
configure:4827: gcc -shared conftest.o -v -Wl,-soname -Wl,conftest -o
conftest 2>&1 | grep -lc >/dev/null 2>&1
configure:5443: checking for tgoto in -ltermcap
configure:5462: gcc -o conftest -g -O2 -I -I conftest.c -ltermcap -L
-L 1>&5
configure:5485: checking for readline in -lreadline
configure:5504: gcc -o conftest -g -O2 -I -I conftest.c -lreadline
-ltermcap -L -L 1>&5
configure:5529: checking for tgoto in -lncurses
configure:5548: gcc -o conftest -g -O2 -I -I conftest.c -lncurses -L
-L -lreadline -ltermcap 1>&5
configure:5614: checking for rl_free_line_state in -lreadline
configure:5633: gcc -o conftest -g -O2 -I -I conftest.c -lreadline -L
-L -lreadline -ltermcap -lncurses 1>&5
configure:5660: checking for xml-config
configure:5704: checking for xmlSAXUserParseFile
configure:5732: gcc -o conftest -g -O2 -I -I -DREADLINE_4 conftest.c
-L/usr/lib -lxml -lz -L -L -lreadline -ltermcap -lncurses 1>&5
configure:5802: checking for imlib-config
configure:5837: checking for IMLIB - version >= 1.9.7
configure:5899: gcc -o conftest -g -O2 -I -I -DREADLINE_4
-I/usr/include/gtk-1.2 -I/usr/include/glib-1.2 -I/usr/lib/glib/include
-I/usr/X11R6/include -I/usr/X11R6/include conftest.c -L -L -lreadline
-ltermcap -lncurses -L/usr/lib -lgdk_imlib -L/usr/lib -L/usr/X11R6/lib
-lgtk -lgdk -rdynamic -lgmodule -lglib -ldl -lXi -lXext -lX11 -lm 1>&5
configure:6038: checking for gtk-config
configure:6073: checking for GTK - version >= 1.2.0
configure:6174: gcc -o conftest -g -O2 -I -I -DREADLINE_4
-I/usr/include/gtk-1.2 -I/usr/include/glib-1.2 -I/usr/lib/glib/include
-I/usr/X11R6/include -I/usr/X11R6/include -DWITH_GDK_IMLIB
-I/usr/include/gtk-1.2 -I/usr/include/glib-1.2 -I/usr/lib/glib/include
-I/usr/X11R6/include conftest.c -L/usr/lib -L/usr/X11R6/lib -lgtk -lgdk
-rdynamic -lgmodule -lglib -ldl -lXi -lXext -lX11 -lm -L -L -lreadline
-ltermcap -lncurses -L/usr/lib -lgdk_imlib -L/usr/lib -L/usr/X11R6/lib
-lgtk -lgdk -rdynamic -lgmodule -lglib -ldl -lXi -lXext -lX11 -lm 1>&5
configure:6307: checking for gtkextra-config
configure:6342: checking for GTK_EXTRA - version >= 0.99.17
configure:6443: gcc -o conftest -g -O2 -I -I -DREADLINE_4
-I/usr/include/gtk-1.2 -I/usr/include/glib-1.2 -I/usr/lib/glib/include
-I/usr/X11R6/include -I/usr/X11R6/include -DWITH_GDK_IMLIB
-I/usr/include/gtk-1.2 -I/usr/include/glib-1.2 -I/usr/lib/glib/include
-I/usr/X11R6/include -I/usr/local/include conftest.c -L/usr/local/lib
-lgtk -lgdk -lgtkextra -lglib -lm -L -L -lreadline -ltermcap -lncurses
-L/usr/lib -lgdk_imlib -L/usr/lib -L/usr/X11R6/lib -lgtk -lgdk -rdynamic
-lgmodule -lglib -ldl -lXi -lXext -lX11 -lm -L/usr/lib -L/usr/X11R6/lib
-lgtk -lgdk -rdynamic -lgmodule -lglib -ldl -lXi -lXext -lX11 -lm 1>&5
cc1: warning: changing search order for system directory
"/usr/local/include"
cc1: warning: as it has already been specified as a non-system directory
configure: failed program was:
#line 6365 "configure"
#include "confdefs.h"
#include <gtkextra/gtkextra.h>
#include <stdio.h>
#include <stdlib.h>
int
main ()
{
int major, minor, micro;
char *tmp_version;
system ("touch conf.gtkextratest");
/* HP/UX 9 (%@#!) writes to sscanf strings */
tmp_version = g_strdup("0.99.17");
if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
printf("%s, bad version string\n", "0.99.17");
exit(1);
}
if ((gtkextra_major_version != 0) ||
(gtkextra_minor_version != 99) ||
(gtkextra_micro_version != 17))
{
printf("\n*** 'gtkextra-config --version' returned %d.%d.%d, but
GTK_EXTRA+ (%d.%d.%d)\n",
0, 99, 17,
gtkextra_major_version, gtkextra_minor_version,
gtkextra_micro_version);
printf ("*** was found! If gtkextra-config was correct, then it is
best\n");
printf ("*** to remove the old version of GTK_EXTRA+. You may also
be able to fix the error\n");
printf("*** by modifying your LD_LIBRARY_PATH enviroment variable,
or by editing\n");
printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that
is\n");
printf("*** required on your system.\n");
printf("*** If gtkextra-config was wrong, set the environment
variable GTK_EXTRA_CONFIG\n");
printf("*** to point to the correct copy of gtkextra-config, and
remove the file config.cache\n");
printf("*** before re-running configure\n");
}
#if defined (GTK_EXTRA_MAJOR_VERSION) && defined (GTK_EXTRA_MINOR_VERSION)
&& defined (GTK_EXTRA_MICRO_VERSION)
else if ((gtkextra_major_version != GTK_EXTRA_MAJOR_VERSION) ||
(gtkextra_minor_version != GTK_EXTRA_MINOR_VERSION) ||
(gtkextra_micro_version != GTK_EXTRA_MICRO_VERSION))
{
printf("*** GTK_EXTRA+ header files (version %d.%d.%d) do not
match\n",
GTK_EXTRA_MAJOR_VERSION, GTK_EXTRA_MINOR_VERSION,
GTK_EXTRA_MICRO_VERSION);
printf("*** library (version %d.%d.%d)\n",
gtkextra_major_version, gtkextra_minor_version,
gtkextra_micro_version);
}
#endif /* defined (GTK_EXTRA_MAJOR_VERSION) ... */
else
{
if ((gtkextra_major_version > major) ||
((gtkextra_major_version == major) && (gtkextra_minor_version >
minor)) ||
((gtkextra_major_version == major) && (gtkextra_minor_version ==
minor) && (gtkextra_micro_version >= micro)))
{
return 0;
}
else
{
printf("\n*** An old version of GTK_EXTRA+ (%d.%d.%d) was
found.\n",
gtkextra_major_version, gtkextra_minor_version,
gtkextra_micro_version);
printf("*** You need a version of GTK_EXTRA+ newer than %d.%d.%d.
The latest version of\n",
major, minor, micro);
printf("*** GTK_EXTRA+ is always available from
ftp://ftp.gtkextra.org.\n");
printf("***\n");
printf("*** If you have already installed a sufficiently new
version, this error\n");
printf("*** probably means that the wrong copy of the
gtkextra-config shell script is\n");
printf("*** being found. The easiest way to fix this is to remove
the old version\n");
printf("*** of GTK_EXTRA+, but you can also set the
GTK_EXTRA_CONFIG environment to point to the\n");
printf("*** correct copy of gtkextra-config. (In this case, you
will have to\n");
printf("*** modify your LD_LIBRARY_PATH enviroment variable, or
edit /etc/ld.so.conf\n");
printf("*** so that the correct libraries are found at
run-time))\n");
}
}
return 1;
}
configure:6487: gcc -o conftest -g -O2 -I -I -DREADLINE_4
-I/usr/include/gtk-1.2 -I/usr/include/glib-1.2 -I/usr/lib/glib/include
-I/usr/X11R6/include -I/usr/X11R6/include -DWITH_GDK_IMLIB
-I/usr/include/gtk-1.2 -I/usr/include/glib-1.2 -I/usr/lib/glib/include
-I/usr/X11R6/include -I/usr/local/include conftest.c -L -L -lreadline
-ltermcap -lncurses -L/usr/lib -lgdk_imlib -L/usr/lib -L/usr/X11R6/lib
-lgtk -lgdk -rdynamic -lgmodule -lglib -ldl -lXi -lXext -lX11 -lm
-L/usr/lib -L/usr/X11R6/lib -lgtk -lgdk -rdynamic -lgmodule -lglib -ldl
-lXi -lXext -lX11 -lm -L/usr/local/lib -lgtk -lgdk -lgtkextra -lglib -lm
1>&5
cc1: warning: changing search order for system directory
"/usr/local/include"
cc1: warning: as it has already been specified as a non-system directory
***************************************************************************8
I hope you can help me.
**************************************
* Blake Simpkins *
* Graduate Student Researcher *
* UC San Diego, Matl. Sci. & Engr. *
* ph. 858-822-1412 *
* http://kesey.ucsd.edu/~bss/ *
**************************************
Science is like sex: sometimes something useful comes out,
but that is not the reason we are doing it.
- Richard Feynman
-------------------------------------------------------
This SF.net email is sponsored by: ValueWeb:
Dedicated Hosting for just $79/mo with 500 GB of bandwidth!
No other company gives more support or power for your dedicated server
http://click.atdmt.com/AFF/go/sdnxxaff00300020aff/direct/01/