Re: ipnat 4.1.31

Steve Clark wrote:
> Hello,
> 
> Currently I have the following nat rule:
> 
> map eth1 from 192.168.4.0/24 ! to 192.168.10.0/24 -> 10.0.129.150/32 portmap tcp/udp 40000:60000
> 
> which nats everything coming from the 192.168.4.0/24 network unless it is going to the 192.168.10.0/24
> network.
> 
> Is there a way to specify an additional destination ip address range that is not to be natted, something like:
> 
>  map eth1 from 192.168.4.0/24 ! to ( 192.168.10.0/24  or 176.16.0.0/16 ) -> 10.0.129.150/32 portmap tcp/udp 40000:60000
> 
> Thanks,
> Steve
> 
Hmmm....

I guess since no one responded this is not doable with ipfilter or it is so obvious people think I am
a troll.

Regards,
Steve