Re: ipnat 4.1.31
Peter Eisch <[email protected]>
| Newsgroups | gmane.comp.security.firewalls.ipfilter |
|---|---|
| Message-ID | <21683_1240243798_49EC9E55_21683_2190_1_C6120857.49CF7%[email protected]> |
Indeed, not do-able. On 4/20/09 10:43 AM, "Steve Clark" <[email protected]> wrote: > Steve Clark wrote: >> Hello, >> >> Currently I have the following nat rule: >> >> map eth1 from 192.168.4.0/24 ! to 192.168.10.0/24 -> 10.0.129.150/32 portmap >> tcp/udp 40000:60000 >> >> which nats everything coming from the 192.168.4.0/24 network unless it is >> going to the 192.168.10.0/24 >> network. >> >> Is there a way to specify an additional destination ip address range that is >> not to be natted, something like: >> >> map eth1 from 192.168.4.0/24 ! to ( 192.168.10.0/24 or 176.16.0.0/16 ) -> >> 10.0.129.150/32 portmap tcp/udp 40000:60000 >> >> Thanks, >> Steve >> > Hmmm.... > > I guess since no one responded this is not doable with ipfilter or it is so > obvious people think I am > a troll. > > Regards, > Steve