Re: PIX 515 7.1 vs: 8.0

On Sat, Mar 19, 2011 at 7:48 AM, John Morrison
<[email protected]> wrote:
> Brian,
>
> The PIX guide
> (http://www.cisco.com/en/US/docs/security/pix/pix70/hw/installation/guide/515.html)
> says both the 4FE and 4FE-66 can be used with the unrestricted feature
> license. A maximum of 6 ports can be used (2 built-in plus the 4FE). On the
> 4FE the ports are numbered 2, 3, 4, 5 from left to right. The info for the
> 4FE
> (http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_data_sheet09186a0080189f0a.html)
> says it is fine in the 515/515E.
>
> The VAC and VAC+ also can be used.
>
> 128MB RAM is enough for the features. Only the VAC appears to require at
> least v6.3
>
> It sounds right.
>

Thank you for setting me on the right path John. For some reason, I
thought the ports were number right to left (thinking port 2 was
closest to the PCI slot. However, I learned something new today, it is
the other way around.

So now I have the DMZ port working with the 4FE-66 card.

Thanks for everyone patience with me on this one. Again, you just have
to got back the basics and think of what the simplest problem could
be.

Brian