Re: NTP time up to date?

On 12 August 2011 11:29, Nicolas Seinlet <[email protected]> wrote:

> I've tested NTP on ipcop 1.9.20 It seems that ipcop does not update his
> time from remote ntp servers, even by changing ntp pool configured using an
> other ntp pool (0.be.pool.ntp.org 1.be.pool.ntp.org 2.be.pool.ntp.org)
>
> ntp daemon seems running :
>
>
>  ntp       1522     1  0.0  0.3   4140  1508 ?        Ss   20:02:11 00:00:00 /usr/bin/ntpd -p /var/run/ntpd.pid -u ntp:ntp
>
>
> Seinlet Nicolas
>

Hi

It's working on by box:

root@ipcop:~ # ntpq -np
     remote           refid      st t when poll reach   delay   offset
 jitter
==============================================================================
*195.92.168.185  193.62.22.74     2 u  343 1024  377   44.446   -1.667
0.529
+195.92.67.35    195.66.241.2     2 u  120 1024  377   46.373   -1.338
0.313
 127.127.1.0     .LOCL.           7 l    -   64    0    0.000    0.000
0.000

Have a look in Logs > System > NTP section, to see if it is working, or if
there are any useful error messages.

Have you just built from SVN sources? Gilles removed a patch a few days ago,
in preparation for release of ntp 4.2.6p4...

Eric

------------------------------------------------------------------------------
Get a FREE DOWNLOAD! and learn more about uberSVN rich system, 
user administration capabilities and model configuration. Take 
the hassle out of deploying and managing Subversion and the 
tools developers use with it. 
http://p.sf.net/sfu/wandisco-dev2dev

_______________________________________________
IPCop-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ipcop-devel