Re: Usb Modeswitch.

"Gilles Espinasse" <[email protected]>
Newsgroups gmane.comp.security.ipcop.devel
Message-ID <033c01cc7061$ad71d980$f9b5a8c0@pii350>
----- Original Message ----- 
From: "Robert Ladyman" <it-Mr0VS1uEpT87VdE/[email protected]>
To: <[email protected]>
Sent: Friday, September 09, 2011 8:11 AM
Subject: Re: [IPCop-devel] Usb Modeswitch.



> I checked the old machine that I used to use and found this:
> /etc/udev/rules.d/51-usb-modeswitch.rules:
>
> SUBSYSTEM=="block",
> SYSFS{idProduct}=="5010", SYSFS{idVendor}=="1410", RUN="/bin/eject %k"
>
>obviously the idProduct and idVendor might need to be changed and I have no
> idea whether udev rules are supported.

I never saw in config/rootfiles/common/usb-modeswitch a
51-usb-modeswitch.rules.
On initial package inclusion, this was 80-usb_modeswitch.rules, changed
later to
40-usb_modeswitch.rules

Gilles


------------------------------------------------------------------------------
Using storage to extend the benefits of virtualization and iSCSI
Virtualization increases hardware utilization and delivers a new level of
agility. Learn what those decisions are and how to modernize your storage 
and backup environments for virtualization.
http://www.accelacomm.com/jaw/sfnl/114/51434361/
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.