Re: Memory problems running IPCop 2.1.4 on an ALIX.2D13 Board

Olaf Westrik wrote:

> 
> Last I looked the Alix.2d13 has 256 MiB.
> As soon as stuff is stored in /ram and/or /tmp that means less memory
> available for system and services.
> 
You are quite right my memory must be failing :(  The Alix board only has 
256  MB of memory.


>> This does seem to be a peak loading problem which
>> would seem to have increased with the latest release of software.
> 
> Maybe not. Especially log files can and will (by design) influence RAM
> on Flash installations. So those should be monitored closely.
>
> Make sure the web proxy has 0 for memory and disk cache, and keep
> logging disabled.

OK, I had 4 MB set for the cache and logging enabled (default?).

I'll reset these to your suggestions and set makegraphs.pl  back to normal 
timing and see if I am still getting problems. 


Bob


------------------------------------------------------------------------------
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
Instantly run your Selenium tests across 300+ browser/OS combos.  Get 
unparalleled scalability from the best Selenium testing platform available.
Simple to use. Nothing to install. Get started now for free."
http://p.sf.net/sfu/SauceLabs