Re: snmp-ios-config script argument problem

Sorry for the delay in getting this message through to the mailing list.
You reported this separately on Github [1], and I believe we satisfactorily
resolved it there:

1. Corrected examples in NSEdoc to reflect the creds.snmp script-arg in use
for several versions now.
2. Improved snmp.lua's retrieval of credentials to understand strings
provided without a ":" separator.

Dan

[1] https://github.com/nmap/nmap/issues/862

On Thu, Apr 20, 2017 at 9:56 PM, Michael Hubbard <
[email protected]> wrote:

> I have a question about the snmp-ios-config script.
>
> I have been using it for a couple years with great success but I ran it
> today and it failed to pull the configuration.
>
> I ran wireshark and noticed that even though I defined:
> --script-args snmpcommunity=private
> it passed public as the string.
>
> I tried typing the script from scratch and going back to some notes I had
> on using the script but I was unsuccessful. If I set the switch up with a
> RW community of public it works.
>
> I started up a virtual machine that had Nmap 6.47 installed and the script
> worked perfectly.
>
> i tried the script on Ubuntu and Windows 7.
>
> Is there something I have to do in nmap 7.40 to pass the argument?
>
> If not can you point me in the right direction to troubleshoot?
>
> Thanks!
>
> Here is my command line.
>
> mhubbard@1S1K-SYS76:~$ sudo nmap -v -n -sU -p 161 --script
> snmp-ios-config --script-args snmpcommunity=private 192.168.10.51
>
> Starting Nmap 7.40 ( https://nmap.org ) at 2017-04-16 16:04 PDT
> NSE: Loaded 1 scripts for scanning.
> NSE: Script Pre-scanning.
> Initiating NSE at 16:04
> Completed NSE at 16:04, 0.00s elapsed
> Initiating ARP Ping Scan at 16:04
> Scanning 192.168.10.51 [1 port]
> Completed ARP Ping Scan at 16:04, 0.03s elapsed (1 total hosts)
> Initiating UDP Scan at 16:04
> Scanning 192.168.10.51 [1 port]
> Discovered open port 161/udp on 192.168.10.51
> Completed UDP Scan at 16:04, 0.04s elapsed (1 total ports)
> NSE: Script scanning 192.168.10.51.
> Initiating NSE at 16:04
> Completed NSE at 16:04, 5.00s elapsed
> Nmap scan report for 192.168.10.51
> Host is up (0.0036s latency).
> PORT    STATE SERVICE
> 161/udp open  snmp
> MAC Address: 64:00:F1:01:6F:C1 (Cisco Systems)
>
> NSE: Script Post-scanning.
> Initiating NSE at 16:04
> Completed NSE at 16:04, 0.00s elapsed
> Read data files from: /usr/local/bin/../share/nmap
> Nmap done: 1 IP address (1 host up) scanned in 5.41 seconds
>            Raw packets sent: 2 (116B) | Rcvd: 2 (158B)
> mhubbard@1S1K-SYS76:~$
>
> --
>
> http://mwhubbard.blogspot.com
>
> Twitter: @rikosintie
>
> https://www.linkedin.com/in/mwhubbard
>
> Minilock Public Key
>
> 22LXKQertj4op8vCjpWNmGJyaGPryp3BEFv8d2y4rTzG4Q
>
>
>
> _______________________________________________
> Sent through the dev mailing list
> https://nmap.org/mailman/listinfo/dev
> Archived at http://seclists.org/nmap-dev/
>

_______________________________________________
Sent through the dev mailing list
https://nmap.org/mailman/listinfo/dev
Archived at http://seclists.org/nmap-dev/