Re: FW: Partial Quantity Issues

Les Mittman - SBC <lmittman@...> writes:

> 
> Just to clarify, Scrap Factor and Yield are two (2) different things 
in
> BPCS.
> 
> The BOM Scrap Factor is applied to the specific Component on the BOM.  
Each
> BOM Component can have a Scrap Factor defined.  That is, a 2% Scrap 
Factor
> would be expressed as 1.02000.  This value is used as a multiplier for 
the
> BOM Quantity Required for the Component in order to calculate the 
Total
> Quantity Required.  So, if the BOM Quantity is 100, the Planned 
Quantity
> (which is used for MRP, SFC, and CST) will be 100 * 1.02 = 102.
> 
> Yield is applied at the Parent Item and is expressed as at percent 
(e.g.
> 95).  In effect, a 5% increase will be required for the Parent 
Quantity in
> order to achieve the desired Resulting or Planned Quantity.  The 
impact is
> that Yield on the Parent will appear as if the Scrap Factor has been 
applied
> to each of the BOM Components.  But, that impact is because the Parent
> Quantity is increased which in turn will blow through the BOM. 
> 
> Thank.
> 
> Les Mittman
> 
> BPCS Consultant
> 
> 847-858-5235
> 
> -----Original Message-----
> From: bpcs-l-bounces+lmittman=sbcglobal.net@...
> [mailto:bpcs-l-bounces+lmittman=sbcglobal.net@...] On
> Behalf Of Al
> Sent: Saturday, July 18, 2009 12:48 PM
> To: 'BPCS ERP System'
> Subject: [BPCS-L] FW: Partial Quantity Issues
> 
> YIELD is sometimes known as "scrap factor." 
> 
> The field is MBM.BMSCP
> 
> Default is 1.0 meaning 100%.
> 
> 1.08 means consume an extra 8%.
> 
> Al Macintyre
> 

Hi , I faced an issue where the Parent is required quantity 100. 
But the Child BOM's are not reflecting the required quantity as 
multiples of 100.

In Example: 
Parent1 : 1
 Child 1 Required : 2 Quantity
 Child 2 Required : 5 Quantity

My Shop Order is for 100 quantity for Parent Item 
Then all the Child Items under the Parent, required quantity should be 
reflecting as 100 * quantity

But in my case , one of the child item is not reflecting the *100
i.e 

   Child 1 Required (in FMA ) : Required quantity is 100 *2

   Child 2 Required (in FMA) : Required quantity is 5 (This should be 
500, but showing only 5)

Kindly let me know if any setup missing to check


-- 
This is the BPCS ERP System (BPCS-L) mailing list
To post a message email: BPCS-L-Zwy7GipZuJhWk0Htik3J/[email protected]
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/bpcs-l
or email: BPCS-L-request-Zwy7GipZuJhWk0Htik3J/[email protected]
Before posting, please take a moment to review the archives
at http://archive.midrange.com/bpcs-l.