Re: Work Order / Batch Closeout Question
Jeff Snyder <[email protected]>
| Newsgroups | gmane.comp.systems.as400.mapics |
|---|---|
| Message-ID | <[email protected]> |
Todd, I see. I have not seen this approach, but are you tailored in I/M for batch update = No ? Is this an option ? Just a thought. Jeff > From: [email protected] > To: mapics-l-Zwy7GipZuJhWk0Htik3J/[email protected] > Date: Wed, 21 Oct 2009 16:24:58 -0500 > Subject: Re: [MAPICS-L] Work Order / Batch Closeout Question > > Jeff, Thank for the reply. We are loading an inventory batch. We do not > have PMC module.. I will keep this in mind. Thanks > > Todd Ivy > > TYMCO, Inc. > 225 E. Industrial Blvd > Waco, Tx 76705 > > T:(254) 799-5546 Ext:389 > F:(254) 799-2722 > > www.tymco.com <http://www.tymco.com> > > > > > > > -----Original Message----- > From: mapics-l-bounces-Zwy7GipZuJhWk0Htik3J/[email protected] > [mailto:mapics-l-bounces-Zwy7GipZuJhWk0Htik3J/[email protected]]On Behalf Of Jeff Snyder > Sent: Wednesday, October 21, 2009 3:59 PM > To: mapics midrange > Subject: Re: [MAPICS-L] Work Order / Batch Closeout Question > > > > Todd, > > > > Do you have the PMC module and access to the TRDATA file, or are you loading > an Inventory batch ? > > > > If you do have the PMC module you might want to consider writing the RM to > TRDATA for PMC to process. > > > > Good Luck, > > > > Jeff Snyder, CPIM, CSCP > > Guide Technologies, LLC > > > > > To: mapics-l-Zwy7GipZuJhWk0Htik3J/[email protected] > > From: [email protected] > > Date: Wed, 21 Oct 2009 20:10:08 +0000 > > Subject: Re: [MAPICS-L] Work Order / Batch Closeout Question > > > > Check to ensure that the unattached jobs are running. Also, if the status > of the transactions are "U", either the unattached jobs are not running, or > there is an error causing the posting to be on hold. > > Sent from my Verizon Wireless BlackBerry > > > > -----Original Message----- > > From: "Todd Ivy" <[email protected]> > > Date: Wed, 21 Oct 2009 14:59:45 > > To: MAPICS ERP System Discussion<mapics-l-Zwy7GipZuJhWk0Htik3J/[email protected]> > > Subject: Re: [MAPICS-L] Work Order / Batch Closeout Question > > > > No errors. Thanks > > > > Todd Ivy > > > > TYMCO, Inc. > > 225 E. Industrial Blvd > > Waco, Tx 76705 > > > > T:(254) 799-5546 Ext:389 > > F:(254) 799-2722 > > > > www.tymco.com <http://www.tymco.com> > > > > > > > > > > > > > > -----Original Message----- > > From: mapics-l-bounces-Zwy7GipZuJhWk0Htik3J/[email protected] > > [mailto:mapics-l-bounces-Zwy7GipZuJhWk0Htik3J/[email protected]]On Behalf Of Kevin D Fox > > Sent: Wednesday, October 21, 2009 2:47 PM > > To: MAPICS ERP System Discussion > > Subject: Re: [MAPICS-L] Work Order / Batch Closeout Question > > > > > > Yes...there are errors in your transactions. You need to correct the > errors > > Sent from my Verizon Wireless BlackBerry > > > > -----Original Message----- > > From: "Todd Ivy" <[email protected]> > > Date: Wed, 21 Oct 2009 10:22:00 > > To: MAPICS ERP System Discussion<mapics-l-Zwy7GipZuJhWk0Htik3J/[email protected]> > > Subject: [MAPICS-L] Work Order / Batch Closeout Question > > > > Hello all, > > > > We have implemented a wireless scanner barcoding system for inventory > > purposes. We have got it running smoothly for the most part, but have an > > issue that I cannot resolve. Hopefully someone else has had this issue or > > may know what could cause it. > > > > The problem we are having is when we try to create an RM transaction on > our > > wireless scanners. There is a scenario when MAPICS goes to a certain > > screen, and the scanner doesn't recognize the screen, b/c we have not told > > the scanner what to do when it sees it. (Mainly b/c we don't know what > > causes the screen to appear and never saw it while manually creating RM > > transactions.) After MAPICS processes the RM transation, it wants to close > > the batch. This is of course normal. Up to here we are fine. As it comes > > to the screen that typically gives you the option to F23 to Supspend the > > Batch, or F24 to Close the Batch, it knows to close the batch and run the > > register. Every once in a while, when we get to this screen, it only gives > > the option to F23 Suspend, and doesn't give the F24 to Close option. Here, > > the scanner doesn't know what to do and "freezes". This only happens a few > > times a week, so I know our programming is correct for the most part, b/c > it > > works the rest of the time. > > > > My question is does anybody know why we are getting the screen that > doesn't > > allow us to F24 Close Batch. There were no errors in the batches in > > question. There are no other types of transactions, only RM (Manufacturing > > Receipts). > > > > Any help would be greatly appreciated. Thanks so much. > > > > Todd Ivy > > > > TYMCO, Inc. > > 225 E. Industrial Blvd > > Waco, Tx 76705 > > > > T:(254) 799-5546 Ext:389 > > F:(254) 799-2722 > > > > www.tymco.com <http://www.tymco.com> > > > > > > > > > > > > > > _______________________________________________ > > This is the MAPICS ERP System Discussion (MAPICS-L) mailing list > > To post a message email: MAPICS-L-Zwy7GipZuJhWk0Htik3J/[email protected] > > To subscribe, unsubscribe, or change list options, > > visit: http://lists.midrange.com/mailman/listinfo/mapics-l > > or email: MAPICS-L-request-Zwy7GipZuJhWk0Htik3J/[email protected] > > Before posting, please take a moment to review the archives > > at http://archive.midrange.com/mapics-l. > > > > _______________________________________________ > > This is the MAPICS ERP System Discussion (MAPICS-L) mailing list > > To post a message email: MAPICS-L-Zwy7GipZuJhWk0Htik3J/[email protected] > > To subscribe, unsubscribe, or change list options, > > visit: http://lists.midrange.com/mailman/listinfo/mapics-l > > or email: MAPICS-L-request-Zwy7GipZuJhWk0Htik3J/[email protected] > > Before posting, please take a moment to review the archives > > at http://archive.midrange.com/mapics-l. > > > > > > > > _______________________________________________ > > This is the MAPICS ERP System Discussion (MAPICS-L) mailing list > > To post a message email: MAPICS-L-Zwy7GipZuJhWk0Htik3J/[email protected] > > To subscribe, unsubscribe, or change list options, > > visit: http://lists.midrange.com/mailman/listinfo/mapics-l > > or email: MAPICS-L-request-Zwy7GipZuJhWk0Htik3J/[email protected] > > Before posting, please take a moment to review the archives > > at http://archive.midrange.com/mapics-l. > > > > _______________________________________________ > > This is the MAPICS ERP System Discussion (MAPICS-L) mailing list > > To post a message email: MAPICS-L-Zwy7GipZuJhWk0Htik3J/[email protected] > > To subscribe, unsubscribe, or change list options, > > visit: http://lists.midrange.com/mailman/listinfo/mapics-l > > or email: MAPICS-L-request-Zwy7GipZuJhWk0Htik3J/[email protected] > > Before posting, please take a moment to review the archives > > at http://archive.midrange.com/mapics-l. > > > > _______________________________________________ > This is the MAPICS ERP System Discussion (MAPICS-L) mailing list > To post a message email: MAPICS-L-Zwy7GipZuJhWk0Htik3J/[email protected] > To subscribe, unsubscribe, or change list options, > visit: http://lists.midrange.com/mailman/listinfo/mapics-l > or email: MAPICS-L-request-Zwy7GipZuJhWk0Htik3J/[email protected] > Before posting, please take a moment to review the archives > at http://archive.midrange.com/mapics-l. > > > _______________________________________________ > This is the MAPICS ERP System Discussion (MAPICS-L) mailing list > To post a message email: MAPICS-L-Zwy7GipZuJhWk0Htik3J/[email protected] > To subscribe, unsubscribe, or change list options, > visit: http://lists.midrange.com/mailman/listinfo/mapics-l > or email: MAPICS-L-request-Zwy7GipZuJhWk0Htik3J/[email protected] > Before posting, please take a moment to review the archives > at http://archive.midrange.com/mapics-l. > _______________________________________________ This is the MAPICS ERP System Discussion (MAPICS-L) mailing list To post a message email: MAPICS-L-Zwy7GipZuJhWk0Htik3J/[email protected] To subscribe, unsubscribe, or change list options, visit: http://lists.midrange.com/mailman/listinfo/mapics-l or email: MAPICS-L-request-Zwy7GipZuJhWk0Htik3J/[email protected] Before posting, please take a moment to review the archives at http://archive.midrange.com/mapics-l.