| Newsgroups |
gmane.comp.systems.as400.mapics |
| Message-ID |
<[email protected]> |
what is the big deal about sign on sign off...do you use barcode employee
swipe to start-stop...1st 100 are done,...employee @ terminal with swipe
card,...log off 1 job complete, log on to next and not take a step...still
using finger punch job control R U....
In a message dated 1/21/2010 6:46:34 P.M. Eastern Standard Time,
[email protected] writes:
Thanks Tom,
Yes we thought of both of those. We are implementing MES, shop floor (New
MDCC) The objective was to a present the correct qty remaining on one
line, and not force 2 sign ons, Offs.
I will keep searching, but thanks.
Jeff
> To: mapics-l-Zwy7GipZuJhWk0Htik3J/[email protected]
> From: TEStieger-7y5+ka1ulstWk0Htik3J/[email protected]
> Date: Thu, 21 Jan 2010 15:38:07 -0800
> Subject: Re: [MAPICS-L] OBPM, or PCC
>
> Why not have it say:
> 0010 Make components set
> Manufacture 2 brackets per required quantity
> 0020 Assemble Components
>
> With this method you could also have the option of having the component
sets (2 brackets) in stock as a pair or set and issue them to the MO if
they are already made.
> ----
> You could also have them make half of them in one step and the other
half in another step.
>
> 0010 Make Components (100 Remaining)
> 0011 Make more components (100 Remaining)
> 0020 Assemble components (100 Remaining)
>
>
> -Tom Stieger
> California Fine Wire
>
> -----Original Message-----
> From: mapics-l-bounces-Zwy7GipZuJhWk0Htik3J/[email protected]
[mailto:mapics-l-bounces-Zwy7GipZuJhWk0Htik3J/[email protected]] On Behalf Of Jeff Snyder
> Sent: Thursday, January 21, 2010 12:26 PM
> To: mapics-l-Zwy7GipZuJhWk0Htik3J/[email protected]
> Subject: [MAPICS-L] OBPM, or PCC
>
>
> All,
>
>
>
> We have a situation where we have phantomized a component and moved the
routing to the parent item.
>
>
>
> We need 2 components per parent.
>
>
>
> routing step 0010 is 'make component'
>
>
>
> 0020 is final assemble parent
>
>
>
>
>
> The issue, question is when I open an MO for the parent for a qty of
100, the '0010' operation displays a qty of 100 remaining.
>
>
>
> 0010 make 100 components.
>
>
>
> 0020 final assembly 100 parents.
>
>
>
> Has anyone run across this situation before, any idea of how to
accommodate the display of a qty for 200 for operation 0010 'make component' would
be appreciated.
>
>
>
> Thanks Much,
>
>
>
> Jeff Snyder, CPIM, CSCP
>
> Guide Technologies, LLC
>
>
>
>
>
> _______________________________________________
> This is the MAPICS ERP System Discussion (MAPICS-L) mailing list To post
a message email: MAPICS-L-Zwy7GipZuJhWk0Htik3J/[email protected] To subscribe, unsubscribe, or
change list options,
> visit: http://lists.midrange.com/mailman/listinfo/mapics-l
> or email: MAPICS-L-request-Zwy7GipZuJhWk0Htik3J/[email protected]
> Before posting, please take a moment to review the archives at
http://archive.midrange.com/mapics-l.
>
> _______________________________________________
> This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
> To post a message email: MAPICS-L-Zwy7GipZuJhWk0Htik3J/[email protected]
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/mapics-l
> or email: MAPICS-L-request-Zwy7GipZuJhWk0Htik3J/[email protected]
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/mapics-l.
>
_______________________________________________
This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
To post a message email: MAPICS-L-Zwy7GipZuJhWk0Htik3J/[email protected]
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/mapics-l
or email: MAPICS-L-request-Zwy7GipZuJhWk0Htik3J/[email protected]
Before posting, please take a moment to review the archives
at http://archive.midrange.com/mapics-l.
_______________________________________________
This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
To post a message email: MAPICS-L-Zwy7GipZuJhWk0Htik3J/[email protected]
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/mapics-l
or email: MAPICS-L-request-Zwy7GipZuJhWk0Htik3J/[email protected]
Before posting, please take a moment to review the archives
at http://archive.midrange.com/mapics-l.