Re: Problem with Zoom USB modem

Christophe BARRY <[email protected]>
Newsgroups gmane.comp.telephony.fax.hylafax.user
Message-ID <D2500F1A.82D69%[email protected]>
Could you please send us the modem config File ?

Christophe


De : David Denney <[email protected]<mailto:[email protected]>>
Date : vendredi 23 octobre 2015 16:13
À : "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Objet : [hylafax-users] Problem with Zoom USB modem

I am trying to set up Hylafax on a Ubuntu 14.04LTS machine.
I get it all set up and I start getting wedged e-mails.
I set the server tracing to 0xFFF and when I look at the logs, I get the following:

FaxGetty[1450]: DELAY 10 ms
FaxGetty[1450]: MODEM flush i/o
FaxGetty[1450]: <-- [4:ATZ\r]
FaxGetty[1450]: --> [5:ERROR]
FaxGetty[1450]: MODEM Command error
FaxGetty[1450]: MODEM set DTR OFF
FaxGetty[1450]: Unable to setup modem on /dev/ttyACM0; giving up after 2 attempts
FaxQueuer[1396]: MODEM /dev/ttyACM0 appears to be wedged
FaxQueuer[1396]: MODEM WEDGED: bin/wedged "ttyACM0" "/dev/ttyACM0"
FaxGetty[1450]: CLOSE /dev/ttyACM0

Why would it error out on a reset command? I tried cu to test the modem, AT command gives OK, but ATZ, ATZ0, and ATZ1 all error out.

This is a model 3095 USB modem from Zoom (based on Conextant chipset *I believe*)

Any ideas?

Thank you in advance
David
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.