mail2fax.sh

I posted yesterday regarding asterisk complaining requirecalltoken=no 
needed to be added to my iax.conf; which it already was. I updated 
asterisk to the latest release: 13.8.2. I'm sure now that asterisk was 
reporting the error incorrectly.

I'm now getting the following error, which I did see yesterday while I 
was manipulating /etc/asterisk/iax.conf:

asterisk console:
[2016-04-20 23:06:06] NOTICE[3773]: chan_iax2.c:11222 
socket_process_helper: Rejected connect attempt from 127.0.0.1:4576, 
request '62452329@fax' does not exist


/var/spool/fax/log/c000000190:
Apr 20 23:06:06.70: [ 4786]: SESSION BEGIN 000000190 62452329
Apr 20 23:06:06.70: [ 4786]: HylaFAX (tm) Version 5.5.8
Apr 20 23:06:06.70: [ 4786]: SEND FAX: JOB 17 DEST mail2fax COMMID 
000000190 DEVICE '/dev/ttyIAX6' FROM 'John Pierce 
<[email protected]>' USER fax
Apr 20 23:06:06.70: [ 4786]: STATE CHANGE: RUNNING -> SENDING
Apr 20 23:06:06.70: [ 4786]: <-- [12:AT+FCLASS=1\r]
Apr 20 23:06:06.71: [ 4786]: --> [2:OK]
Apr 20 23:06:06.71: [ 4786]: MODEM set XON/XOFF/FLUSH: input ignored, 
output disabled
Apr 20 23:06:06.74: [ 4786]: DIAL 62452329
Apr 20 23:06:06.74: [ 4786]: <-- [13:ATDT62452329\r]
Apr 20 23:06:06.74: [ 4786]: --> [11:NO DIALTONE]
Apr 20 23:06:06.74: [ 4786]: SEND FAILED: JOB 17 DEST mail2fax ERR No 
local dialtone {E004}
Apr 20 23:06:07.75: [ 4786]: <-- [5:ATH0\r]
Apr 20 23:06:07.75: [ 4786]: --> [2:OK]
Apr 20 23:06:07.75: [ 4786]: MODEM set DTR OFF
Apr 20 23:06:07.75: [ 4786]: MODEM set baud rate: 0 baud (flow control 
unchanged)
Apr 20 23:06:07.75: [ 4786]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 
5)
Apr 20 23:06:07.75: [ 4786]: SESSION END


DIAL 62452329: Where is hylafax getting this from? The number is grossly 
incorrect, but the context fax is correct.
As you can see it's the same number asterisk is using to open an iax2 
channel, but its only 8 characters, so asterisk is rejecting the number. 
My dedicated fax number is 228XXXXXXX.

I configured mail2fax as follows:
Grabbed mail2fax.sh from here:
http://hylafax.sourceforge.net/howto/misc/mail2fax.sh

Installed it and configured my already running/working postfix as per 
these instructions:
http://hylafax.sourceforge.net/howto/faxing.php

added "transport_maps = hash:/etc/postfix/transport" to 
/etc/postfix/main.cf
created /etc/postfix/transport: added "fax.mydomainname.com 
fax:localhost"
ran: postmap /etc/postfix/transport

added "alias_database = hash:/etc/aliases" to alias_database = 
hash:/etc/aliases
created postfix /etc/aliases: added "mail2fax: |/usr/bin/mail2fax.sh"
ran: newaliases
verified: /etc/aliases.db

created FaxDispatch, added following alias:
[email protected];
FILETYPE=tiff;
NOTIFY_FAXMASTER=errors;

created fax email alias via postfixadmin
added second domain fax.mydomainname.com
created fax.mydomainname.com cname record in dns.

I can receive faxes. I verified with a free online service. I just cant 
send.


Thanks for your help.

-- 
John Pierce


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe [email protected] < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail [email protected].*