Re: Modem not connected after hardware change

Am Donnerstag, 10. November 2016, 13:07:47 CET schrieb Lee Howard:
> On 11/10/2016 04:13 AM, Max Mothwurf wrote:
> > Am Donnerstag, 3. November 2016, 10:11:21 CET schrieb Lee Howard:
> >> On 11/02/2016 07:49 AM, Max Mothwurf wrote:
> >>> Hi,
> >>> 
> >>> my old motherboard got defective, and I had to change it to something
> >>> new,
> >>> an MSI H110M PRO-D, which still has a com-port:
> >>> 
> >>> southpole:/home # dmesg | grep tty
> >>> [    0.000000] console [tty0] enabled
> >>> [    1.301116] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200)
> >>> is
> >>> a
> >>> 16550A
> >>> [    1.321787] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud =
> >>> 115200) is a 16550A
> >>> [    1.332473] tty ttyS15: hash matches
> >>> [    4.396806] dw-apb-uart.2: ttyS4 at MMIO 0xdff2b000 (irq = 20,
> >>> base_baud = 115200) is a 16550A
> >>> 
> >>> IMHO that looks like ttyS0 is working properly. Permissions on
> >>> /dev/ttyS0
> >>> are OK as well, but during probe hylafax cant access the port:
> >>> southpole:/home # faxaddmodem ttyS0
> >>> Sorry, the device is currently in use by another program.
> >>> - no idea which one that could be
> >>> Hylafax version is hylafax+ 5.5.6
> >> 
> >> That "sorry..." message is because there is a lock file found for that
> >> modem.  Look in /var/lock or /var/lock/uucp for a lock file and remove
> >> it.
> > 
> > I did a new installation of the whole system, but still can access. Speed
> > probe says that it cant deduce the speed.
> > southpole: # dmesg | grep tty
> > [    0.000000] console [tty0] enabled
> > [    1.053210] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is
> > a
> > 16550A
> > [    1.073867] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud =
> > 115200) is a 16550A
> > [    3.656479] dw-apb-uart.2: ttyS4 at MMIO 0xdf12b000 (irq = 20,
> > base_baud = 115200) is a 16550A
> > 
> > If course I tried ttyS1 as well....
> 
> Have you tried accessing the modem with minicom or cu?

Problem is solved...hardware problem. The shop installed the wrong connector 
cable - obviously there are two different kinds

Thanks for supporting anyway!
MAx


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe [email protected] < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail [email protected].*