Re: Upgraded from asterisk 18.14.0 to 20.0.0 and inbound registration(?) is now failing

Hi Justin,

There's absolutely no detail here regarding the SIP messages going out 
and back.  You'll need to include the asterisk-side sip debug.

https://wiki.asterisk.org/wiki/display/AST/Collecting+Debug+Information
https://support.digium.com/s/article/How-to-collect-an-Asterisk-Debug-Capture

If you're using pjsip, you'll need to use it's specific logging.
https://www.asterisk.org/new-pjsip-logging-functionality/



On 12/2/22 12:22, Justin Piszcz wrote:
> Hello,
>
> I have been using asterisk for the past decade and never had an issue 
> with upgrades until now.  Recently, in November I upgraded from 
> 18.14.0 to 20.0.0 and afterwards my SPA3102 can no longer register 
> with asterisk.  I have not made any asterisk or SPA3102 configuration 
> changes in ~1-2 years.
>
> asterisk versions: (old -> new)
> 18.14.0~dfsg+~cs6.12.40431414-1+b1
> 20.0.0~dfsg+~cs6.12.40431414-2
>
> An example of the log from the SPA3102 under asterisk (succeeds) 18 
> vs. asterisk 20 (fails), kindly inquiring what I may have missed that 
> is causing these failures?
>
> asterisk18_sip_success.txt (inbound call success) from the SPA3102 
> (with asterisk 18 installed)
> Dec  1 17:34:55 system1 local3 fs: 11707:11782:65536
> Dec  1 17:34:55 system1 local3 fls: af:1:0:0
> Dec  1 17:34:55 system1 local3 fbr: 0:3000:3000:03d6a:0008:0007:5.1.10(GW)
> Dec  1 17:34:55 system1 local3 fhs: 01:0:0001:upg:app:0:3.3.6(GW)
> Dec  1 17:34:55 system1 local3 fhs: 02:0:0002:upg:app:1:3.3.6(GW)
> Dec  1 17:34:55 system1 local3 fhs: 03:0:0003:upg:app:2:3.3.6(GW)
> Dec  1 17:34:55 system1 local3 fhs: 04:0:0004:upg:app:0:5.1.10(GW)
> Dec  1 17:34:55 system1 local3 fhs: 05:0:0005:upg:app:1:5.1.10(GW)
> Dec  1 17:34:55 system1 local3 fhs: 06:0:0006:upg:app:2:5.1.10(GW)
> Dec  1 17:34:56 system1 local3 fu: 0:3d91, 0003 0001
> Dec  1 17:35:19 system1 local2 FXO: Start CNDD
> Dec  1 17:35:21 system1 local2 FXO: CNDD name=11234567890, 
> number=1234567890
> Dec  1 17:35:21 system1 local2 FXO: Stop CNDD
> Dec  1 17:35:21 system1 local3 FXO: CNDD Name=11234567890 Phone=1234567890
> Dec  1 17:35:22 system1 local2 AUD: Stop PSTN Tone
> Dec  1 17:35:22 system1 local2 AUD: Stop PSTN Tone
> Dec  1 17:35:22 system1 local2 Calling: [email protected]:0 
> <http://[email protected]:0>
> Dec  1 17:35:22 system1 local2  [1:0]AUD ALLOC CALL (port=16458)
> Dec  1 17:35:22 system1 local2  [1:0]RTP Rx Up
> Dec  1 17:35:22 system1 local2 CC: pc(0)=18 not in codec list
> Dec  1 17:35:22 system1 local2  [0:0]AUD ALLOC CALL (port=16460)
> Dec  1 17:35:22 system1 local2  [0:0]RTP Rx Up
> Dec  1 17:35:22 system1 local2 CC: Ringback
> Dec  1 17:35:22 system1 local2  [1:0]RTP Rx Dn
> Dec  1 17:35:22 system1 local2 AUD: Play PSTN Tone 9
> Dec  1 17:35:23 system1 local3 IDBG: sc-0
> Dec  1 17:35:23 system1 local3 IDBG: rs:10
> Dec  1 17:35:26 system1 local3 IDBG: sc-0
> Dec  1 17:35:26 system1 local3 IDBG: rs:8
> Dec  1 17:35:32 system1 local2 AUD: Stop PSTN Tone
> Dec  1 17:35:32 system1 local3 FXO: On Hook
> Dec  1 17:35:32 system1 local2 AUD: Stop PSTN Tone
> Dec  1 17:35:32 system1 local2 FXO: Stop CNDD
> Dec  1 17:35:32 system1 local3  [0]FM Alert Stop RxTx (c=002550b0;a=0)
> Dec  1 17:35:32 system1 local2  [1:0]AUD Rel Call
> Dec  1 17:35:32 system1 local3  [0]FM Alert Stop RxTx (c=0024e5e8;a=0)
> Dec  1 17:35:32 system1 local2  [0:0]AUD Rel Call
> Dec  1 17:35:32 system1 local2 CC: Ended
>
>
> asterisk20_sip_error.txt  (inbound call failure) from the SPA3102 
> (with asterisk 20 installed)
> Dec  1 17:23:21 system1 local2 FXO: Start CNDD
> Dec  1 17:23:23 system1 local2 FXO: CNDD name=11234567890, 
> number=1234567890
> Dec  1 17:23:23 system1 local2 FXO: Stop CNDD
> Dec  1 17:23:23 system1 local3 FXO: CNDD Name=11234567890 Phone=1234567890
> Dec  1 17:23:24 system1 local2 AUD: Stop PSTN Tone
> Dec  1 17:23:24 system1 local2 AUD: Stop PSTN Tone
> Dec  1 17:23:24 system1 local2 Calling: [email protected]:0 
> <http://[email protected]:0>
> Dec  1 17:23:24 system1 local2  [1:0]AUD ALLOC CALL (port=16418)
> Dec  1 17:23:24 system1 local2  [1:0]RTP Rx Up
> Dec  1 17:23:24 system1 local2  [1]SIP:ICMP Error -1 (a000001:5060, 2)
> Dec  1 17:23:24 system1 local3 RSE_DEBUG: getting alternate from 
> domain:system1.int.com <http://system1.int.com>
> Dec  1 17:23:24 system1 local3  [0]FM Alert Stop RxTx (c=002550b0;a=0)
> Dec  1 17:23:24 system1 local2  [1:0]AUD Rel Call
> Dec  1 17:23:24 system1 local2 CC: Failed w/ Calling
> Dec  1 17:23:24 system1 local2 AUD: Stop PSTN Tone
> Dec  1 17:23:24 system1 local2 AUD: Stop PSTN Tone
> Dec  1 17:23:39 system1 local2 AUD: Stop PSTN Tone
> Dec  1 17:23:39 system1 local3 FXO: On Hook
> Dec  1 17:23:39 system1 local2 AUD: Stop PSTN Tone
> Dec  1 17:23:39 system1 local2 FXO: Stop CNDD
>
> Regards,
> Justin
>
>

-- 
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
      https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users