Re: Upgraded from asterisk 18.14.0 to 20.0.0 and inbound registration(?) is now failing

John Harragin <[email protected]>
Newsgroups gmane.comp.telephony.pbx.asterisk.user
Message-ID <CAEB6hR4bFQZmpMZQ1atHfkdL3qmU2Y-kFRAOUVCxysrSsa6rRA@mail.gmail.com> 
I had similar issues. It looks like modules related to pjsip
(geolocation?) introduced new prerequisites. There is a script in the
source that prepares for an asterisk build. Try running that, then
recompile asterisk and see if that fixes things.
John

On Fri, Dec 2, 2022 at 3:36 PM Justin Piszcz <[email protected]> wrote:
>
> Hello,
>
> I have been using asterisk for the past decade and never had an issue with upgrades until now.  Recently, in November I upgraded from 18.14.0 to 20.0.0 and afterwards my SPA3102 can no longer register with asterisk.  I have not made any asterisk or SPA3102 configuration changes in ~1-2 years.
>
> asterisk versions: (old -> new)
> 18.14.0~dfsg+~cs6.12.40431414-1+b1
> 20.0.0~dfsg+~cs6.12.40431414-2
>
> An example of the log from the SPA3102 under asterisk (succeeds) 18 vs. asterisk 20 (fails), kindly inquiring what I may have missed that is causing these failures?
>
> asterisk18_sip_success.txt (inbound call success) from the SPA3102 (with asterisk 18 installed)
> Dec  1 17:34:55 system1 local3 fs: 11707:11782:65536
> Dec  1 17:34:55 system1 local3 fls: af:1:0:0
> Dec  1 17:34:55 system1 local3 fbr: 0:3000:3000:03d6a:0008:0007:5.1.10(GW)
> Dec  1 17:34:55 system1 local3 fhs: 01:0:0001:upg:app:0:3.3.6(GW)
> Dec  1 17:34:55 system1 local3 fhs: 02:0:0002:upg:app:1:3.3.6(GW)
> Dec  1 17:34:55 system1 local3 fhs: 03:0:0003:upg:app:2:3.3.6(GW)
> Dec  1 17:34:55 system1 local3 fhs: 04:0:0004:upg:app:0:5.1.10(GW)
> Dec  1 17:34:55 system1 local3 fhs: 05:0:0005:upg:app:1:5.1.10(GW)
> Dec  1 17:34:55 system1 local3 fhs: 06:0:0006:upg:app:2:5.1.10(GW)
> Dec  1 17:34:56 system1 local3 fu: 0:3d91, 0003 0001
> Dec  1 17:35:19 system1 local2 FXO: Start CNDD
> Dec  1 17:35:21 system1 local2 FXO: CNDD name=11234567890, number=1234567890
> Dec  1 17:35:21 system1 local2 FXO: Stop CNDD
> Dec  1 17:35:21 system1 local3 FXO: CNDD Name=11234567890 Phone=1234567890
> Dec  1 17:35:22 system1 local2 AUD: Stop PSTN Tone
> Dec  1 17:35:22 system1 local2 AUD: Stop PSTN Tone
> Dec  1 17:35:22 system1 local2 Calling: [email protected]:0
> Dec  1 17:35:22 system1 local2  [1:0]AUD ALLOC CALL (port=16458)
> Dec  1 17:35:22 system1 local2  [1:0]RTP Rx Up
> Dec  1 17:35:22 system1 local2 CC: pc(0)=18 not in codec list
> Dec  1 17:35:22 system1 local2  [0:0]AUD ALLOC CALL (port=16460)
> Dec  1 17:35:22 system1 local2  [0:0]RTP Rx Up
> Dec  1 17:35:22 system1 local2 CC: Ringback
> Dec  1 17:35:22 system1 local2  [1:0]RTP Rx Dn
> Dec  1 17:35:22 system1 local2 AUD: Play PSTN Tone 9
> Dec  1 17:35:23 system1 local3 IDBG: sc-0
> Dec  1 17:35:23 system1 local3 IDBG: rs:10
> Dec  1 17:35:26 system1 local3 IDBG: sc-0
> Dec  1 17:35:26 system1 local3 IDBG: rs:8
> Dec  1 17:35:32 system1 local2 AUD: Stop PSTN Tone
> Dec  1 17:35:32 system1 local3 FXO: On Hook
> Dec  1 17:35:32 system1 local2 AUD: Stop PSTN Tone
> Dec  1 17:35:32 system1 local2 FXO: Stop CNDD
> Dec  1 17:35:32 system1 local3  [0]FM Alert Stop RxTx (c=002550b0;a=0)
> Dec  1 17:35:32 system1 local2  [1:0]AUD Rel Call
> Dec  1 17:35:32 system1 local3  [0]FM Alert Stop RxTx (c=0024e5e8;a=0)
> Dec  1 17:35:32 system1 local2  [0:0]AUD Rel Call
> Dec  1 17:35:32 system1 local2 CC: Ended
>
>
> asterisk20_sip_error.txt  (inbound call failure) from the SPA3102 (with asterisk 20 installed)
> Dec  1 17:23:21 system1 local2 FXO: Start CNDD
> Dec  1 17:23:23 system1 local2 FXO: CNDD name=11234567890, number=1234567890
> Dec  1 17:23:23 system1 local2 FXO: Stop CNDD
> Dec  1 17:23:23 system1 local3 FXO: CNDD Name=11234567890 Phone=1234567890
> Dec  1 17:23:24 system1 local2 AUD: Stop PSTN Tone
> Dec  1 17:23:24 system1 local2 AUD: Stop PSTN Tone
> Dec  1 17:23:24 system1 local2 Calling: [email protected]:0
> Dec  1 17:23:24 system1 local2  [1:0]AUD ALLOC CALL (port=16418)
> Dec  1 17:23:24 system1 local2  [1:0]RTP Rx Up
> Dec  1 17:23:24 system1 local2  [1]SIP:ICMP Error -1 (a000001:5060, 2)
> Dec  1 17:23:24 system1 local3 RSE_DEBUG: getting alternate from domain:system1.int.com
> Dec  1 17:23:24 system1 local3  [0]FM Alert Stop RxTx (c=002550b0;a=0)
> Dec  1 17:23:24 system1 local2  [1:0]AUD Rel Call
> Dec  1 17:23:24 system1 local2 CC: Failed w/ Calling
> Dec  1 17:23:24 system1 local2 AUD: Stop PSTN Tone
> Dec  1 17:23:24 system1 local2 AUD: Stop PSTN Tone
> Dec  1 17:23:39 system1 local2 AUD: Stop PSTN Tone
> Dec  1 17:23:39 system1 local3 FXO: On Hook
> Dec  1 17:23:39 system1 local2 AUD: Stop PSTN Tone
> Dec  1 17:23:39 system1 local2 FXO: Stop CNDD
>
> Regards,
> Justin
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> Check out the new Asterisk community forum at: https://community.asterisk.org/
>
> New to Asterisk? Start here:
>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

-- 
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
      https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.