Re: Chrony problem - not synchronizing time
Miroslav Lichvar <[email protected]>
| Newsgroups | gmane.comp.time.chrony.user |
|---|---|
| Message-ID | <Yz1Yvc0NHK6UB1Lh@localhost> |
On Wed, Oct 05, 2022 at 11:56:37AM +0200, Tino Mihajlovik wrote: > Before the GPS is working, PPS is not locked to anything, it is marked with ? sign same as on start. From your config: refclock SHM 0 refid GPS precision 1e-1 offset 0.42 #refclock SHM 1 refid PPS precision 1e-7 trust refclock PPS /dev/pps2 lock NMEA refid PPS precision 1e-7 trust The PPS refclock is using the lock option, but specifies a nonexistent refclock. It should be "GPS". You might want to also add the "noselect" option to the SHM 0 to be used only for locking and not synchronization. If the GPS refclock is providing samples before the receiver is locked, I think that would be a hardware/firmware issue, or possibly something in gpsd. -- Miroslav Lichvar -- To unsubscribe email chrony-users-request-kWFZVVI9zxvPqho9SqqRMmD2FQJk+8+b@public.gmane.org with "unsubscribe" in the subject. For help email chrony-users-request-kWFZVVI9zxvPqho9SqqRMmD2FQJk+8+b@public.gmane.org with "help" in the subject. Trouble? Email [email protected]