Re: Chrony problem - not synchronizing time

Thank you for the suggestion.
Will try it and let you know.

Thanks again

Sent from my iPhone

> On 5.10.2022, at 12:13, Miroslav Lichvar <[email protected]> wrote:
> 
> On Wed, Oct 05, 2022 at 11:56:37AM +0200, Tino Mihajlovik wrote:
>> Before the GPS is working, PPS is not locked to anything, it is marked with ? sign same as on start.
> 
> From your config:
> refclock SHM 0 refid GPS precision 1e-1 offset 0.42
> #refclock SHM 1 refid PPS precision 1e-7 trust
> refclock PPS /dev/pps2 lock NMEA refid PPS precision 1e-7 trust
> 
> The PPS refclock is using the lock option, but specifies a nonexistent
> refclock. It should be "GPS". You might want to also add the
> "noselect" option to the SHM 0 to be used only for locking and not
> synchronization.
> 
> If the GPS refclock is providing samples before the receiver is
> locked, I think that would be a hardware/firmware issue, or possibly
> something in gpsd.
> 
> -- 
> Miroslav Lichvar
> 
> 
> -- 
> To unsubscribe email chrony-users-request-kWFZVVI9zxvPqho9SqqRMmD2FQJk+8+b@public.gmane.org 
> with "unsubscribe" in the subject.
> For help email chrony-users-request-kWFZVVI9zxvPqho9SqqRMmD2FQJk+8+b@public.gmane.org 
> with "help" in the subject.
> Trouble?  Email [email protected]
> 

-- 
To unsubscribe email chrony-users-request-kWFZVVI9zxvPqho9SqqRMmD2FQJk+8+b@public.gmane.org 
with "unsubscribe" in the subject.
For help email chrony-users-request-kWFZVVI9zxvPqho9SqqRMmD2FQJk+8+b@public.gmane.org 
with "help" in the subject.
Trouble?  Email [email protected]