Re: [CinePaint] cinepaint vs Gimp

Thanks - look forward to the new release!

Brgds


Ron

On Sat, 2007-01-13 at 19:15 +0100, Kai-Uwe Behrmann wrote:
> Ron,
> 
> thanks for your message. The chances are not bad that a bugfix in the 
> core will no longer shake memory on some systems. The changes are in CVS. 
> Python messages must be ignored.
> 
> I'd like to put a new release candiate on sf, possibly this weekend.
> 
> 
> kind regards
> Kai-Uwe Behrmann
> --
> development for color management 
> www.behrmann.name + www.oyranos.org + www.cinepaint.org
> 
> 
> Am 13.01.07, 17:17 -0000 schrieb Ron Hickson:
> 
> > Kai
> > 
> > I've just reinstalled cinepaint-0.21-2 and opened it using the command
> > line.   The readout is:-
> > 
> > Traceback (most recent call last):
> >   File "/usr/local/lib/cinepaint/0.21-2/plug-ins/clothify.py", line 21,
> > in ?
> >     from gimpfu import *
> > ImportError: No module named gimpfu
> > wire_read: unexpected EOF (plug-in crashed?)
> > Traceback (most recent call last):
> >   File "/usr/local/lib/cinepaint/0.21-2/plug-ins/gimpcons.py", line 20,
> > in ?
> >     from gimpfu import *
> > ImportError: No module named gimpfu
> > wire_read: unexpected EOF (plug-in crashed?)
> > Traceback (most recent call last):
> >   File "/usr/local/lib/cinepaint/0.21-2/plug-ins/pdbbrowse.py", line 20,
> > in ?
> >     from gimpfu import *
> > ImportError: No module named gimpfu
> > wire_read: unexpected EOF (plug-in crashed?)
> > Traceback (most recent call last):
> >   File "/usr/local/lib/cinepaint/0.21-2/plug-ins/sphere.py", line 21,
> > in ?
> >     from gimpfu import *
> > ImportError: No module named gimpfu
> > wire_read: unexpected EOF (plug-in crashed?)
> > Traceback (most recent call last):
> >   File "/usr/local/lib/cinepaint/0.21-2/plug-ins/whirlpinch.py", line
> > 27, in ?
> >     from gimpfu import *
> > ImportError: No module named gimpfu
> > wire_read: unexpected EOF (plug-in crashed?)
> > Traceback (most recent call last):
> >   File "/usr/local/lib/cinepaint/0.21-2/plug-ins/foggify.py", line 3,
> > in ?
> >     from gimpfu import *
> > ImportError: No module named gimpfu
> > wire_read: unexpected EOF (plug-in crashed?)
> > Traceback (most recent call last):
> >   File "/usr/local/lib/cinepaint/0.21-2/plug-ins/shadow_bevel.py", line
> > 3, in ?
> >     from gimpfu import *
> > ImportError: No module named gimpfu
> > wire_read: unexpected EOF (plug-in crashed?)
> > /usr/local/lib/cinepaint/0.21-2/plug-ins/script-fu
> > /usr/local/lib/cinepaint/0.21-2/plug-ins/rawphoto
> > /usr/local/lib/cinepaint/0.21-2/plug-ins/rotate
> > /usr/local/lib/cinepaint/0.21-2/plug-ins/screenshot
> > /usr/local/lib/cinepaint/0.21-2/plug-ins/sgi
> > /usr/local/lib/cinepaint/0.21-2/plug-ins/sharpen
> > /usr/local/lib/cinepaint/0.21-2/plug-ins/snoise
> > /usr/local/lib/cinepaint/0.21-2/plug-ins/sobel
> > /usr/local/lib/cinepaint/0.21-2/plug-ins/spread
> > /usr/local/lib/cinepaint/0.21-2/plug-ins/tga
> > /usr/local/lib/cinepaint/0.21-2/plug-ins/tiff
> > /usr/local/lib/cinepaint/0.21-2/plug-ins/unsharp
> > /usr/local/lib/cinepaint/0.21-2/plug-ins/xwd
> > 
> >     Incorrect item=84 gimp-bfm-set-dir-dest 0 < 2
> >     Incorrect item=315 gimp-bfm-set-dir-src 0 < 2
> > script_fu_find_scripts
> > home, local_path
> > = /home/ron, /home/ron/.cinepaint/scripts:/usr/local/share/cinepaint/0.21-2/scripts
> > 
> > Seems I'm missing a few plug-ins.    ./configure says it has found
> > python2.4 and slocate turns up:-
> > 
> > [ron@localhost ~]$ slocate gimpfu
> > /usr/local/lib/gimp/2.0/python/gimpfu.py
> > /usr/local/lib/gimp/2.0/python/gimpfu.pyc
> > /usr/local/lib/gimp/2.0/python/gimpfu.pyo
> > /usr/local/gimp-2.3/lib/gimp/2.0/python/gimpfu.py
> > /usr/local/gimp-2.3/lib/gimp/2.0/python/gimpfu.pyc
> > /usr/local/gimp-2.3/lib/gimp/2.0/python/gimpfu.pyo
> > /usr/lib/gimp/2.0/python/gimpfu.py
> > 
> > I'm using Mandriva 2007 with gimp-python installed and, as you can see,
> > I'm running GIMP-2.3 and 2.3.13.   Perhaps cinepaint configure is
> > confused?
> > 
> > The prime reason for reinstalling was an error
> > ("plug_in_handle_proc_run:ERROR").  I haven't got rid of it but that
> > only occurs on 8-bit files.   I recall sometime back you dealt with a
> > similar query (8-bit files printing backwards).  Not to worry - it's not
> > important, just something you may care to note.
> > 
> > The layers thing is intermittent and hasn't cause me much concern
> > 
> > Regards
> > 
> > 
> > 
> > 
> > 
> > 
> > Ron
> > On Fri, 2007-01-12 at 14:03 +0100, Kai-Uwe Behrmann wrote:
> > > Ron,
> > > 
> > > Valgrind dont show me anything. Would you mind sending me your valgrind 
> > > output? (A gdb backtrace could be of help as well.)
> > > 
> > > regards
> > > Kai-Uwe Behrmann
> > > --
> > > development for color management 
> > > www.behrmann.name + www.oyranos.org + www.cinepaint.org
> > > 
> > > 
> > > Am 12.01.07, 13:02 +0100 schrieb Ron Hickson:
> > > 
> > > > Happens for me too.
> > > > 
> > > > Ron
> > > > 
> > > > ----- Original Message -----
> > > > From: Robin Rowe
> > > > To: CinePaint Users <cinepaint-users-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>
> > > > Sent:  Fri, 12 Jan 2007 02:21:53 -0800
> > > > Subject: Re: [CinePaint] cinepaint vs Gimp
> > > > 
> > > > laccata wrote:
> > > > > Cinepaint...layers...are unusable - crashing cinepaint every time I tried to use them.
> > > > 
> > > > There's nothing in the bug tracker on this.
> > > > 
> > > > Robin
> > > > 
> 
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Cinepaint-users mailing list
> Cinepaint-users-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> https://lists.sourceforge.net/lists/listinfo/cinepaint-users
> 



-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV