Anyone using dvgrab successfully in opensuse 11.0/11.1?

Woojin Lee <[email protected]>
Newsgroups gmane.comp.video.kino.devel
Message-ID <[email protected]>
Hi.
I've tried several computers with opensuse 11.0/11.1 with three different 
firewire cards, two different cables and two different camcoders, and they 
all fail to detect the DV camcoder.  They all used to work under mandriva a 
while ago, but can't seem to get any of them working in opensuse 11.1.  They 
all give more or less the same error.  Here is the typical output.  
BTW, what does "ieee1394: Failed to generate Configuration ROM image for host 
0" mean?  I keep getting this in dmesg when I run testlibraw.  Can someone 
help please?  Thank you in advance.

Woojin

lspci -vv:
02:0f.2 FireWire (IEEE 1394): Texas Instruments PCI4451 IEEE-1394 Controller 
(prog-if 10 [OHCI])
        Subsystem: Dell PCI4451 IEEE-1394 Controller (Dell Inspiron 8100)
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at f6ffd800 (32-bit, non-prefetchable) [size=2K]
        Region 1: Memory at f6ff8000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: ohci1394
        Kernel modules: ohci1394



dvgrav:
Error: no camera exists



testlibraw:
successfully got handle
current generation number: 1
1 card(s) found
  nodes on bus:  1, card name: ohci1394
using first card found: 1 nodes on bus, local ID is 0, IRM is 0

doing transactions with custom tag handler
trying to send read request to node 0... completed with value 0xe8a689ba

using standard tag handler and synchronous calls
trying to read from node 0... completed with value 0xce638aba

testing FCP monitoring on local node
got fcp command from node 0 of 8 bytes: 01 23 45 67 89 ab cd ef
got fcp response from node 0 of 8 bytes: 01 23 45 67 89 ab cd ef
testing config rom stuff
get_config_rom returned 0, romsize 64, rom_version 4
here are the first 10 quadlets:
0. quadlet: 0xdb5d0404
1. quadlet: 0x34393331
2. quadlet: 0x32a264e0
3. quadlet: 0x00c04f43
4. quadlet: 0x21888c24
5. quadlet: 0x14db0300
6. quadlet: 0xc04f4303
7. quadlet: 0x02000081
8. quadlet: 0xc083000c
9. quadlet: 0x2a2c0600
update_config_rom returned 0

polling for leftover messages


dmesg:
ieee1394: hpsb_update_config_rom() is deprecated
ieee1394: Failed to generate Configuration ROM image for host 0


lsmod|grep 1394:
dv1394                 15652  0
raw1394                21212  0
ohci1394               27656  1 dv1394
ieee1394               83764  3 dv1394,raw1394,ohci1394

------------------------------------------------------------------------------
Crystal Reports - New Free Runtime and 30 Day Trial
Check out the new simplified licensing option that enables 
unlimited royalty-free distribution of the report engine 
for externally facing server and web deployment. 
http://p.sf.net/sfu/businessobjects
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.