Re: Re: Hardware encoding

> >>>>try to play with -dvbscale (man mplayer)
> >>>>   
> >>>>
> >>>>        
> >>>>
> >>>1. The same result. says that playing. no window opened:
> >>>
> >>>
> >>>$ sudo mplayer  -ao mpegpes -vo mpegpes dvb://'GAME NETWORK' -menu -menu-startup  -vf dvbscale
> >>>Opening video filter: [dvbscale]
> >>> 
> >>>
> >>>      
> >>>
> >>what if you use -vf dvbscale=720:576 ?
> >>is it the same if you play mpeg files rather than dvb steams?> 
> >>    
> >>
> >
> >
> >VDec: vo config request - 352 x 576 (preferred csp: Planar YV12)
> >VDec: using Planar YV12 as output csp (no 0)
> >Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
> >VO: [mpegpes] 352x576 => 352x540 Mpeg PES
> >  
> >
> 
> uhm this resolution is really _not_ supported. how the hell does mplayer 
> calculate it?
> try to add -noaspect  and remove -menu* and readd -dvbscale=720:576
> 
> frankly I don't understand why it doesn't work, and I don't have a FF 
> card to test it myself.
> If you say that with the same drivers other programs play well with the 
> card it's obviously a bug with
> mplayer. What drivers are you using?
> 

sudo mplayer  -ao mpegpes -vo mpegpes dvb://'GAME NETWORK'  -vf dvbscale=720:576 -noaspect

The same. No video on monitor. No sound from sound card.
But! There is a sound from dvb-card. And, I guess video from video-out too (cant test).
About sound - may be trouble with drivers for Audigy2 (It must play sound from AUX-input from card).
About video - Im not sure with mode uses MythTV - didnt find such settings there.

All other software modes mplayer plays allright (dga, x11...). But not mpegpes.

My drivers are from 2.6.11.3 kernel dvb_ttpci, saa7146_vv.
Card is SkyStar1.
FirmWare dvb-ttpci-01.fw-261d


Mar 23 23:20:35 ravenholm kernel: Audigy2 value:Special config.
Mar 23 23:20:35 ravenholm kernel: hw_random: RNG not detected
Mar 23 23:20:35 ravenholm kernel: Linux video capture interface: v1.00
Mar 23 23:20:35 ravenholm kernel: saa7146: register extension 'dvb'.
Mar 23 23:20:35 ravenholm kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
Mar 23 23:20:35 ravenholm kernel: ACPI: PCI interrupt 0000:02:0e.0[A] -> GSI 5 (level, low) -> IRQ 5
Mar 23 23:20:35 ravenholm kernel: saa7146: found saa7146 @ mem d09d0000 (revision 1, irq 5) (0x13c2,0x0000).
Mar 23 23:20:35 ravenholm kernel: DVB: registering new adapter (Technotrend/Hauppauge WinTV DVB-S rev1.X).
Mar 23 23:20:35 ravenholm kernel: adapter has MAC addr = 00:d0:5c:03:f1:37
Mar 23 23:20:35 ravenholm kernel: dvb-ttpci: gpioirq unknown type=0 len=0
Mar 23 23:20:35 ravenholm kernel: dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 8000261d
Mar 23 23:20:35 ravenholm kernel: dvb-ttpci: firmware @ card 0 supports CI link layer interface
Mar 23 23:20:35 ravenholm kernel: dvb-ttpci: Crystal audio DAC @ card 0 detectedMar 23 23:20:35 ravenholm kernel: saa7146_vv: saa7146 (0): registered device video0 [v4l2]
Mar 23 23:20:35 ravenholm kernel: DVB: registering frontend 0 (ST STV0299 DVB-S)...
Mar 23 23:20:35 ravenholm kernel: dvb-ttpci: found av7110-0.