Re: Re: Hardware encoding

> frankly I don't understand why it doesn't work, and I don't have a FF 
> card to test it myself.
> If you say that with the same drivers other programs play well with the 
> card it's obviously a bug with
> mplayer. What drivers are you using?


Now I understand less then before.
1.Some channels work perfectly.
2. By default they try to use mplegpes but no luck: 
"The selected video_out device is incompatible with this codec."
3. When I change to some channel problems begins.
Seems It depends of picture resolution.

As far as I uderstand the solt is in "The selected video_out device is incompatible with this codec."

TS file format detected.
DEMUX OPEN, AUDIO_ID: -1, VIDEO_ID: -1, SUBTITLE_ID: -1,
PROBING UP TO 2000000, PROG: 0
VIDEO MPEG2(pid=291)...AUDIO MPA(pid=292) NO SUBS (yet)!  PROGRAM N. 0
Opened TS demuxer, audio: 50(pid 292), video: 10000002(pid 291)...POS=24252
VIDEO:  MPEG2  352x576  (aspect 2)  25.000 fps  15000.0 kbps (1875.0 kbyte/s)
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 48000 Hz, 2 ch, 16 bit (0x10), ratio: 16000->192000 (128.0 kbit)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0.0" => local display)
==========================================================================
Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
VDec: vo config request - 352 x 576 (preferred csp: Mpeg PES)
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
The selected video_out device is incompatible with this codec.
VDecoder init failed :(
Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.4.0b
Selected video codec: [mpeg12] vfm:libmpeg2 (MPEG 1 or 2 (libmpeg2))
==========================================================================
Checking audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 48000 hz, little endian signed int
AF_pre: 48000Hz 2ch Signed 16-bit (Little-Endian)
AO: [oss] 48000Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit...
Starting playback...
VDec: vo config request - 352 x 576 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
VO: [xv] 352x576 => 768x576 Planar YV12


*** HERE CHANGING TO PROBLEM CHANNEL



DEMUX OPEN, AUDIO_ID: -1, VIDEO_ID: -1, SUBTITLE_ID: -1,
PROBING UP TO 2000000, PROG: 0
VIDEO MPEG2(pid=224)...AUDIO MPA(pid=244) NO SUBS (yet)!  PROGRAM N. 0
Opened TS demuxer, audio: 50(pid 244), video: 10000002(pid 224)...POS=65800
VIDEO:  MPEG2  704x576  (aspect 2)  25.000 fps  10000.0 kbps (1250.0 kbyte/s)
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 48000 Hz, 2 ch, 16 bit (0x10), ratio: 24000->192000 (192.0 kbit)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
==========================================================================
Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
VDec: vo config request - 704 x 576 (preferred csp: Mpeg PES)
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
The selected video_out device is incompatible with this codec.
VDecoder init failed :(
Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.4.0b
Selected video codec: [mpeg12] vfm:libmpeg2 (MPEG 1 or 2 (libmpeg2))
==========================================================================
Checking audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 48000 hz, little endian signed int
AF_pre: 48000Hz 2ch Signed 16-bit (Little-Endian)
AO: [oss] 48000Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit...
Starting playback...
VDec: vo config request - 704 x 576 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
VO: [xv] 704x576 => 768x576 Planar YV12
A:8996.0 V:8995.6 A-V:  0.433 ct: -0.954 902/902 39% 32%  4.2% 68 0

           ************************************************
           **** Your system is too SLOW to play this!  ****
           ************************************************

Possible reasons, problems, workarounds:
- Most common: broken/buggy _audio_ driver
  - Try -ao sdl or use the OSS emulation of ALSA.
  - Experiment with different values for -autosync, 30 is a good start.
- Slow video output
  - Try a different -vo driver (-vo help for a list) or try -framedrop!
- Slow CPU
  - Don't try to play a big DVD/DivX on a slow CPU! Try -hardframedrop.
- Broken file
  - Try various combinations of -nobps -ni -forceidx -mc 0.
- Slow media (NFS/SMB mounts, DVD, VCD etc)
  - Try -cache 8192.
- Are you using -cache to play a non-interleaved AVI file?
  - Try -nocache.
Read DOCS/HTML/en/video.html for tuning/speedup tips.
If none of this helps you, read DOCS/HTML/en/bugreports.html.

A:9031.3 V:9015.8 A-V: 15.517 ct:  1.066 1407/1407 53% 45% 12.3% 570 0