Re: mplayer fails to tune channel

Hi,
I have solved my problem. It was a problem in channels.conf:
transmission mode was set to auto. If you have the same setting
modifying it to TRANSMISSION_MODE_8K or TRANSMISSION_MODE_2K.
Let me know if this solve your problem.

Bye,
Tarcisio.

On Sun, Sep 13, 2009 at 12:19 AM, Avl Jawrowski <[email protected]>wrote:

> Tarcisio Fedrizzi <tarcisio.fedrizzi <at> gmail.com> writes:
>
> >
> > Hi all,
> > I'm using mplayer in a freevo based work project, but I have a problem.
> > Mplayer works flawlessy for all medias except for DVB-T.
> > The card can correctly visualize channels and using other programs such
> as
> > kaffeine or tzap.
> > Mplayer instead is not able to tune the signal (I've even tried with
> kubuntu
> > 8.10
>
> Hello,
> I am in the same situation using saa7134 with Pinnacle 310i, and a recent
> mplayer subversion snapshot.
> It goes in timeout:
>
> Not able to lock to the signal on the given frequency, timeout: 30
> dvb_tune, TUNING FAILED
>
> The cards works correctly with w_scan, Kaffeine, scan and tzap.
>
> _______________________________________________
> MPlayer-dvb mailing list
> [email protected]
> https://lists.mplayerhq.hu/mailman/listinfo/mplayer-dvb
>