DTS

Bruno Martin <[email protected]>
Newsgroups gmane.comp.video.ogle.user
Message-ID <20031018203933.GR844@elephantdesmersdusud>
Hi,

I use ogle 0.9.1 and alsa with an S/PDIF output. AC3 audio works
always perfectly. But ogle exit when I switch to DTS audio (I also
have some problems with LPCM too).

Below are the audio part of my oglerc file and the debug log when I
switch to DTS.

Any idea?

Bruno

---
oglerc file:

  <audio>
    <device>
<!--      <driver>oss</driver>
      <path>/dev/dsp</path>  -->
      <alsa>
        <name>iec958:AES0=0x2,AES1=0x82,AES2=0x0,AES3=0x2</name>
      </alsa>
    </device>
<!-- if you have a multichannel card or spdif, uncomment/edit this part -->
    <speakers>

      <channel_config>
        <chtype>AC3</chtype>
      </channel_config>
      <channel_config>
        <chtype>DTS</chtype>
      </channel_config>
      <channel_config>
        <chtype>MPEG</chtype>
      </channel_config>
      <channel_config>
        <chtype>LPCM</chtype>
      </channel_config>
    </speakers>

    <liba52>
      <downmix_level>1.5</downmix_level>
      <drc>no</drc>
      <stereo_mode>dolby</stereo_mode>
    </liba52>
    <sync>
      <type>odelay</type>
      <resample>no</resample>
      <offset>0</offset>
    </sync>
  </audio>

---
debug output when µI switch from AC3 to DTS:

Debug[ogle_nav]: sending audio demuxstream 1
Debug[ogle_nav]: oid: bd, ost: 80, nid: bd, nst: 89
Debug[ogle_mpeg_ps]: newid private:
Debug[ogle_mpeg_ps]: oldid private
Debug[ogle_audio]: DTS: channel arrangement: 5-ch L, R, C, SL, SR
Debug[ogle_audio]: DTS: sample rate: 48 kHz
Debug[ogle_audio]: DTS: bit rate: 768 kbps
Debug[ogle_audio]: Searching <speakers> for:
Debug[ogle_audio]:  'DTS'
Debug[ogle_audio]: <channel_config>
Debug[ogle_audio]:   <chtype>AC3</chtype>
Debug[ogle_audio]: </channel_config>
Debug[ogle_audio]: <channel_config>
Debug[ogle_audio]:   <chtype>DTS</chtype>
Debug[ogle_audio]: </channel_config>
Debug[ogle_audio]: Found matching channel_config
Note[ogle_audio]: Using audio driver 'alsa'
Debug[ogle_audio]: Opening alsa pcm device: iec958:AES0=0x2,AES1=0x82,AES2=0x0,A
ES3=0x2
ERROR[ogle_audio]: Opening alsa pcm device 'iec958:AES0=0x2,AES1=0x82,AES2=0x0,A
ES3=0x2': Success
FATAL[ogle_audio]: failed opening the alsa audio driver at iec958:AES0=0x2,AES1=
0x82,AES2=0x0,AES3=0x2
Debug[ogle_ctrl]: child: 30604 exited with 1 (/usr/lib/ogle/ogle_audio)
Debug[ogle_ctrl]: pid: 30604 exited with status: 1 (/usr/lib/ogle/ogle_audio)
Debug[ogle_ctrl]: child: 30597 killed (/usr/lib/ogle/ogle_gui)
Debug[ogle_ctrl]: pid: 30597 terminated on signal: 2 (/usr/lib/ogle/ogle_gui)
Debug[ogle_ctrl]: child: 30598 killed (/usr/lib/ogle/ogle_nav)
Debug[ogle_ctrl]: pid: 30598 terminated on signal: 2 (/usr/lib/ogle/ogle_nav)
Debug[ogle_ctrl]: child: 30600 exited with 0 (/usr/lib/ogle/ogle_vout)
Debug[ogle_ctrl]: pid: 30600 exited with status: 0 (/usr/lib/ogle/ogle_vout)
Debug[ogle_ctrl]: child: 30599 killed (/usr/lib/ogle/ogle_mpeg_ps)
Debug[ogle_ctrl]: pid: 30599 terminated on signal: 2 (/usr/lib/ogle/ogle_mpeg_ps
)
Debug[ogle_ctrl]: child: 30603 exited with 0 (/usr/lib/ogle/ogle_mpeg_vs)
Debug[ogle_ctrl]: pid: 30603 exited with status: 0 (/usr/lib/ogle/ogle_mpeg_vs)
Debug[ogle_ctrl]: removing shmid: 648118303
Debug[ogle_ctrl]: removing shmid: 648937505
Debug[ogle_ctrl]: removing shmid: 648970274
Debug[ogle_ctrl]: removing shmid: 649003043
Debug[ogle_ctrl]: removing shmid: 649035812
ctrl: ipc_rmid: Invalid argument
Debug[ogle_ctrl]: removing shmid: 649068581
Debug[ogle_ctrl]: removing shmid: 649101350
Note[ogle_ctrl]: exiting
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.