[ tvtime-Bugs-2813564 ] Won't display any TV

Bugs item #2813564, was opened at 2009-06-28 12:01
Message generated for change (Tracker Item Submitted) made by gczerw
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=506987&aid=2813564&group_id=64301

Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: Capture and tuner related
Group: None
Status: Open
Resolution: None
Priority: 5
Private: No
Submitted By: George Czerw (gczerw)
Assigned to: Nobody/Anonymous (nobody)
Summary: Won't display any TV

Initial Comment:
Please see the following outputs below.  I would appreciate any
suggestions to resolve this.  Not having hardware problems, WinVista's
media center works perfectly.

Thanks
George

*************************

tvtime -v                                                     
Running tvtime 1.0.2.                                                             
Reading configuration from /etc/tvtime/tvtime.xml                                 
Reading configuration from /home/george/.tvtime/tvtime.xml                        
cpuinfo: CPU Intel(R) Core(TM)2 Quad  CPU   Q8200  @ 2.33GHz, family 6, model 7, stepping 7.                                                                        
cpuinfo: CPU measured at 2333.352MHz.                                             
xcommon: Display :0.0, vendor The X.Org Foundation, vendor release 10601000       
xfullscreen: Using XINERAMA for dual-head information.
xfullscreen: Pixels are square.
xfullscreen: Number of displays is 1.
xfullscreen: Head 0 at 0,0 with size 1440x900.
xcommon: Have XTest, will use it to ping the screensaver.
xcommon: Pixel aspect ratio 1:1.
xcommon: Pixel aspect ratio 1:1.
xcommon: Window manager is KWin and is EWMH compliant.
xcommon: Using EWMH state fullscreen property.
xcommon: Using EWMH state above property.
xcommon: Using EWMH state below property.
xcommon: Pixel aspect ratio 1:1.
xcommon: Displaying in a 768x576 window inside 768x576 space.
xvoutput: Using XVIDEO adaptor 280: NV17 Video Texture.
speedycode: Using MMXEXT optimized functions.
station: Reading stationlist from /home/george/.tvtime/stationlist.xml
videoinput: Using video4linux2 driver 'cx23885', card 'Hauppauge WinTV-HVR1800' (bus PCIe:0000:03:00.0).
videoinput: Version is 1, capabilities 5010011.
videoinput: Maximum input width: 720 pixels.
tvtime: Sampling input at 720 pixels per scanline.
xcommon: Pixel aspect ratio 1:1.
xcommon: Displaying in a 768x576 window inside 768x576 space.
xcommon: Received a map, marking window as visible (62).
xcommon: Window fully obscured, marking window as hidden (62).
xcommon: Window made visible, marking window as visible (62).
tvtime: Cleaning up.
Thank you for using tvtime.

********************


# lspci
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM
Controller (rev
02)
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI
Express Root Port (rev
02)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 (rev
02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 (rev
02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 (rev
02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller (rev
02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0
ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller
(rev 02)
00:1f.2 RAID bus controller: Intel Corporation 82801 SATA RAID Controller
(rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller
(rev 02)
01:05.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 70) 02:00.0
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI
Express Gigabit Ethernet controller (rev 02) 03:00.0 Multimedia video
controller: Conexant Systems, Inc. Device 8880 (rev 0f)
04:00.0 Network controller: Atheros Communications Inc. AR928X Wireless
Network Adapter (PCI-Express) (rev 01) 05:00.0 VGA compatible controller:
nVidia Corporation Device 0644 (rev a1)

*******************

# v4l-conf
v4l-conf: using X11 display :0.0
dga: version 2.0
WARNING: No DGA direct video mode for this display. mode: 1440x900,
depth=24, bpp=32, bpl=5760, base=unknown /dev/video0 [v4l2]: no overlay
support

*******************
selected DMESG output:

nvidia: module license 'NVIDIA' taints kernel.                                    
nvidia 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16                   
nvidia 0000:05:00.0: setting latency timer to 64                                  

Linux video capture interface: v2.00                                              
cx23885 driver version 0.0.1 loaded                                               
cx23885 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17                  
CORE cx23885[0]: subsystem: 0070:7801, board: Hauppauge WinTV-HVR1800 [card=2,autodetected]                                                                         
tveeprom 0-0050: Hauppauge model 78521, rev C1E9, serial# 5342357                 
tveeprom 0-0050: MAC address is 00-0D-FE-51-84-95                                 
tveeprom 0-0050: tuner model is Philips 18271_8295 (idx 149, type 54)             
tveeprom 0-0050: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)              
tveeprom 0-0050: audio processor is CX23887 (idx 42)                              
tveeprom 0-0050: decoder processor is CX23887 (idx 37)                            
tveeprom 0-0050: has radio                                                        
cx23885[0]: hauppauge eeprom: model=78521                                         
cx25840' 2-0044: cx25  0-21 found @ 0x88 (cx23885[0])                             
cx23885[0]/0: registered device video0 [v4l2]                                     
cx25840' 2-0044: firmware: requesting v4l-cx23885-avcore-01.fw                    
cx25840' 2-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)           
cx23885[0]: registered device video1 [mpeg]                                       
cx23885_dvb_register() allocating 1 frontend(s)                                   
cx23885[0]: cx23885 based dvb card                                                
MT2131: successfully identified at address 0x61                                   
DVB: registering new adapter (cx23885[0])                                         
DVB: registering adapter 0 frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)...      
cx23885_dev_checkrevision() Hardware revision = 0xb1                              
cx23885[0]/0: found at 0000:03:00.0, rev: 15, irq: 17, latency: 0, mmio: 0xf9c00000                                                                                 
cx23885 0000:03:00.0: setting latency timer to 64                                 
IRQ 17/cx23885[0]: IRQF_DISABLED is not guaranteed on shared IRQs
NVRM: loading NVIDIA UNIX x86 Kernel Module  180.51  Thu Apr 16 19:02:15 PDT 2009

----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=506987&aid=2813564&group_id=64301

------------------------------------------------------------------------------