I have several [hint] detected with xine-check command

	
	
	
	

Hi every body,



I run xine on CentOS 5.6 with x86
architecture and I have problem because I can't watch DVD movie but I
can read datas on DVD with Konqueror then I think my DVD driver is
OK.



I installed 'xine-lib' but I think 
xine dont know the path of 'xine-lib'. Where can I specify this path
?
I have several [hint] with my DVD
driver.



This is the log of  'xine-check'
command



Please be patient, this script may take
a while to run...
[ good ] you're using Linux, doing
specific tests
[ good ] looks like you have a /proc
filesystem mounted.
[ good ] You seem to have a reasonable
kernel version (2.6.18-238.9.1.el5)
[ good ] intel compatible processor,
checking MTRR support
[ good ] you have MTRR support and
there are some ranges set.
[ good ] found the player at
/usr/bin/xine
[ good ] /usr/bin/xine is in your PATH
[OUCH!!] no libxine.pc on this machine.
         This means that xine-lib is
either not installed
         or it is installed in a very
unusual place.
         So you should probably install
xine-lib before running xine-check...
         press <enter> to
continue...



[ hint ] unable to determine plugin
directory
         I could not determine your
plugin directory. That would be much easier
         if you had libxine.pc
installed (see message above)...
         Note that I could not check
your xine plugins.
         press <enter> to
continue...



[ good ] /dev/cdrom points to /dev/sr0
[ good ] /dev/dvd points to /dev/sr0
[ hint ] Your DVD drive seems not to be
attached via ATAPI.
         This might be due to the use
of an ide-scsi emulation.
         If you really have a SCSI DVD
drive, your SCSI controller is likely
         to do perfect DMA, so there's
no reason to worry about this.
         However, if you're using
ide-scsi, there is a chance that DMA is
         disabled for the DVD drive.
Moreover, I don't know how to enable
         DMA in that case, so you
probably have to live with some performance
         loss. (FIXME: check for
/proc/ide, provide solution)
         press <enter> to
continue...



[ good ] found xvinfo: X-Video
Extension version 2.2
[ hint ] Your X server doesn't support
YV12 overlays.
         That means xine will have to
do color space transformation and scaling
         in software, which is quite
CPU intensive. Maybe upgrading your
         X server will help here.
         If you have an ATI card,
you'll find accelerated X servers on
        
http://www.linuxvideo.org/gatos/
         press <enter> to
continue...



[ hint ] Your X server doesn't support
YV12 overlays.
         That means xine will have to
do color space transformation and scaling
         in software, which is quite
CPU intensive. Maybe upgrading your
         X server will help here.
         If you have an ATI card,
you'll find accelerated X servers on
        
http://www.linuxvideo.org/gatos/
         press <enter> to
continue...



[ hint ] Your X server doesn't have any
XVideo support...
         XVideo is an X server
extension introduced by XFree86 4.x. This
         extension provides access to
hardware accelerated color space
         conversion and scaling, which
gives a great performance boost.
         If you have a fast (>1GHz)
machine, you may be able to watch all
         kinds of video, anyway. You
will waste lots of CPU cycles, though...
         press <enter> to
continue...









Best regard
Thierry

------------------------------------------------------------------------------
WhatsUp Gold - Download Free Network Management Software
The most intuitive, comprehensive, and cost-effective network 
management toolset available today.  Delivers lowest initial 
acquisition cost and overall TCO of any competing solution.
http://p.sf.net/sfu/whatsupgold-sd

_______________________________________________
xine-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xine-user