Re: Platform Builder 5.0 Connectivity Options

On the other hand, we have realized that one of the three tasks that 
must be started when platform builder starts, "cemgr.exe", did not 
start. We started it manually and it started. What can avoids this 
task to started?

--- In [email protected], "osmankorkutan" 
<osman.korkutan@s...> wrote:
> Hi All,
> 
> Does Platform Builder 5.0 use an order for network cards on local 
> computer to receive boot requests from devices? We have problems to 
> connect to a device through ethernet. The device has an IP address 
> 192.168.56.197 and our ethernet card has an IP address 
192.168.56.196. 
> All security tools and firewalls are disabled. Everything seems to 
be 
> OK but when we boot the device, it does not appear in "Active 
Devices". 
> The ethernet card that we used to connect to the device is a 
secondary 
> one. First one is connected to a LAN and getting IP address by a 
DHCP 
> server and having IP addresses like 141.XXX.XXX.XXX. Moreover, when 
we 
> remove the secondary card and try to connect over the first, it 
fails 
> to connect and view in "Active Devices" again. We have also tried 
to 
> clean the files under Application Data\Microsoft\CoreCon or 
reinstall 
> Platform Builder. What could be the possible reasons?
> 
> Thanks.




------------------------ Yahoo! Groups Sponsor --------------------~--> 
Most low income households are not online. Help bridge the digital divide today!
http://us.click.yahoo.com/cd_AJB/QnQLAA/TtwFAA/W4wwlB/TM
--------------------------------------------------------------------~->