Re: Fedora 4 and Flat LCD monitors
Shreedara <[email protected]> Wed, 19 Jul 2006 14:36:37 +0530
| Newsgroups | gmane.comp.xfree86.forum |
|---|---|
| Message-ID | <[email protected]> |
This is a multi-part message in MIME format. --------------080104090804080007090703 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit I found the solution i did the following to make it work 1, uncomment the frequency and specified the correct frequency 2. change the driver to i810 3. slect the resolution 1280x960 and it worked for me ! thanks to all of you guys *** Hans van der Merwe wrote: >We'll need the log also. >Its /var/log/Xorg.o.log, I think > >On Mon, 2006-07-17 at 15:55 +0530, Shreedara wrote: > > >>I have Fedora core installed on my PC and I have LG Flatron 17" monitor >>[model : L1750SQ]. >>I can;t able to configure this monitor on my FC4 Linux, attached is my >>/etc/X11/xorg.conf file >> >>When graphical screen appears, screen goes blank ! i tired many options >>but still could not figure out >>what is wrong ! >> >>Help me please >>plain text document attachment (xorg.conf.tft) >># Xorg configuration created by system-config-display >> >>Section "ServerLayout" >> Identifier "single head configuration" >> Screen 0 "Screen0" 0 0 >> InputDevice "Mouse0" "CorePointer" >> InputDevice "Keyboard0" "CoreKeyboard" >>EndSection >> >>Section "Files" >> >># RgbPath is the location of the RGB database. Note, this is the name of the >># file minus the extension (like ".txt" or ".db"). There is normally >># no need to change the default. >># Multiple FontPath entries are allowed (they are concatenated together) >># By default, Red Hat 6.0 and later now use a font server independent of >># the X server to render fonts. >> RgbPath "/usr/X11R6/lib/X11/rgb" >> FontPath "unix/:7100" >>EndSection >> >>Section "Module" >> Load "dbe" >> Load "extmod" >> Load "fbdevhw" >> Load "glx" >> Load "record" >> Load "freetype" >> Load "type1" >> Load "dri" >>EndSection >> >>Section "InputDevice" >> >># Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) >># Option "Xleds" "1 2 3" >># To disable the XKEYBOARD extension, uncomment XkbDisable. >># Option "XkbDisable" >># To customise the XKB settings to suit your keyboard, modify the >># lines below (which are the defaults). For example, for a non-U.S. >># keyboard, you will probably want to use: >># Option "XkbModel" "pc102" >># If you have a US Microsoft Natural keyboard, you can use: >># Option "XkbModel" "microsoft" >># >># Then to change the language, change the Layout setting. >># For example, a german layout can be obtained with: >># Option "XkbLayout" "de" >># or: >># Option "XkbLayout" "de" >># Option "XkbVariant" "nodeadkeys" >># >># If you'd like to switch the positions of your capslock and >># control keys, use: >># Option "XkbOptions" "ctrl:swapcaps" >># Or if you just want both to be control, use: >># Option "XkbOptions" "ctrl:nocaps" >># >> Identifier "Keyboard0" >> Driver "kbd" >> Option "XkbModel" "pc105" >> Option "XkbLayout" "us" >>EndSection >> >>Section "InputDevice" >> Identifier "Mouse0" >> Driver "mouse" >> Option "Protocol" "IMPS/2" >> Option "Device" "/dev/input/mice" >> Option "ZAxisMapping" "4 5" >> Option "Emulate3Buttons" "yes" >>EndSection >> >>Section "Monitor" >> Identifier "Monitor0" >> VendorName "LG Electronics" >> ModelName "L1750SQ" >> DisplaySize 360 270 >># HorizSync 30.0 - 92.0 >># VertRefresh 50.0 - 160.0 >> Option "dpms" >>EndSection >> >>Section "Device" >> Identifier "Videocard0" >> Driver "vesa" >> VendorName "Videocard vendor" >> BoardName "Intel 845" >> Option "DisableIRQ" >> Option "EnableAGPDMA" >>EndSection >> >>Section "Screen" >> Identifier "Screen0" >> Device "Videocard0" >> Monitor "Monitor0" >> DefaultDepth 24 >> SubSection "Display" >> Viewport 0 0 >> Depth 16 >> Modes "800x600" "640x480" >> EndSubSection >> SubSection "Display" >> Viewport 0 0 >> Depth 24 >> Modes "1280x960" "1280x800" "1280x1024" "1152x864" "1152x768" "1024x768" "800x600" "640x480" >> EndSubSection >>EndSection >> >>Section "DRI" >> Group 0 >> Mode 0666 >>EndSection >> >> >> > >E-Mail disclaimer: >http://www.sunspace.co.za/emaildisclaimer.htm >_______________________________________________ >Forum mailing list >[email protected] >http://XFree86.Org/mailman/listinfo/forum > > > --------------080104090804080007090703 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type"> <title></title> </head> <body bgcolor="#ffffff" text="#000000"> I found the solution<br> <br> i did the following to make it work<br> <br> 1, uncomment the frequency and specified the correct frequency<br> <br> 2. change the driver to i810<br> <br> 3. slect the resolution 1280x960<br> <br> and it worked for me !<br> <br> thanks to all of you guys<br> <br> ***<br> <br> Hans van der Merwe wrote: <blockquote cite="[email protected]" type="cite"> <pre wrap="">We'll need the log also. Its /var/log/Xorg.o.log, I think On Mon, 2006-07-17 at 15:55 +0530, Shreedara wrote: </pre> <blockquote type="cite"> <pre wrap="">I have Fedora core installed on my PC and I have LG Flatron 17" monitor [model : L1750SQ]. I can;t able to configure this monitor on my FC4 Linux, attached is my /etc/X11/xorg.conf file When graphical screen appears, screen goes blank ! i tired many options but still could not figure out what is wrong ! Help me please plain text document attachment (xorg.conf.tft) # Xorg configuration created by system-config-display Section "ServerLayout" Identifier "single head configuration" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" # RgbPath is the location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. # Multiple FontPath entries are allowed (they are concatenated together) # By default, Red Hat 6.0 and later now use a font server independent of # the X server to render fonts. RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "unix/:7100" EndSection Section "Module" Load "dbe" Load "extmod" Load "fbdevhw" Load "glx" Load "record" Load "freetype" Load "type1" Load "dri" EndSection Section "InputDevice" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3" # To disable the XKEYBOARD extension, uncomment XkbDisable. # Option "XkbDisable" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" # Or if you just want both to be control, use: # Option "XkbOptions" "ctrl:nocaps" # Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "yes" EndSection Section "Monitor" Identifier "Monitor0" VendorName "LG Electronics" ModelName "L1750SQ" DisplaySize 360 270 # HorizSync 30.0 - 92.0 # VertRefresh 50.0 - 160.0 Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "vesa" VendorName "Videocard vendor" BoardName "Intel 845" Option "DisableIRQ" Option "EnableAGPDMA" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 16 Modes "800x600" "640x480" EndSubSection SubSection "Display" Viewport 0 0 Depth 24 Modes "1280x960" "1280x800" "1280x1024" "1152x864" "1152x768" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Group 0 Mode 0666 EndSection </pre> </blockquote> <pre wrap=""><!----> E-Mail disclaimer: <a class="moz-txt-link-freetext" href="http://www.sunspace.co.za/emaildisclaimer.htm">http://www.sunspace.co.za/emaildisclaimer.htm</a> _______________________________________________ Forum mailing list <a class="moz-txt-link-abbreviated" href="mailto:[email protected]">[email protected]</a> <a class="moz-txt-link-freetext" href="http://XFree86.Org/mailman/listinfo/forum">http://XFree86.Org/mailman/listinfo/forum</a> </pre> </blockquote> <br> </body> </html> --------------080104090804080007090703--