Changes committed gnus (configure)
"Katsumi Yamaoka" <[email protected]>
| Newsgroups | gmane.emacs.gnus.commits |
|---|---|
| Message-ID | <[email protected]> |
Modified: configure
Regenerate.
Index: configure
diff -u gnus/configure:7.3 gnus/configure:7.4
--- configure:7.3 Tue Oct 4 11:38:54 2005
+++ configure Fri Feb 8 00:43:23 2008
@@ -1,25 +1,54 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.59.
+# Generated by GNU Autoconf 2.61.
#
-# Copyright (C) 2003 Free Software Foundation, Inc.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
## --------------------- ##
## M4sh Initialization. ##
## --------------------- ##
-# Be Bourne compatible
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
# Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
- set -o posix
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
+
+fi
+
+
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
fi
-DUALCASE=1; export DUALCASE # for MKS sh
# Support unset when possible.
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
@@ -29,8 +58,43 @@
fi
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+as_nl='
+'
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ { (exit 1); exit 1; }
+fi
+
# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
PS1='$ '
PS2='> '
PS4='+ '
@@ -44,18 +108,19 @@
if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
eval $as_var=C; export $as_var
else
- $as_unset $as_var
+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
fi
done
# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
else
as_expr=false
fi
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
as_basename=basename
else
as_basename=false
@@ -63,157 +128,388 @@
# Name of the executable.
-as_me=`$as_basename "$0" ||
+as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)$' \| \
- . : '\(.\)' 2>/dev/null ||
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
- /^X\/\(\/\/\)$/{ s//\1/; q; }
- /^X\/\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+# CDPATH.
+$as_unset CDPATH
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
+if test "x$CONFIG_SHELL" = x; then
+ if (eval ":") 2>/dev/null; then
+ as_have_required=yes
+else
+ as_have_required=no
+fi
+
+ if test $as_have_required = yes && (eval ":
+(as_func_return () {
+ (exit \$1)
+}
+as_func_success () {
+ as_func_return 0
+}
+as_func_failure () {
+ as_func_return 1
+}
+as_func_ret_success () {
+ return 0
+}
+as_func_ret_failure () {
+ return 1
+}
+
+exitcode=0
+if as_func_success; then
+ :
+else
+ exitcode=1
+ echo as_func_success failed.
fi
+if as_func_failure; then
+ exitcode=1
+ echo as_func_failure succeeded.
+fi
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" || {
- # Find who we are. Look in the path if we contain no path at all
- # relative or not.
- case $0 in
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
+if as_func_ret_success; then
+ :
+else
+ exitcode=1
+ echo as_func_ret_success failed.
+fi
- ;;
- esac
- # We did not find ourselves, most probably we were run as `sh COMMAND'
- # in which case we are not to be found in the path.
- if test "x$as_myself" = x; then
- as_myself=$0
- fi
- if test ! -f "$as_myself"; then
- { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
- { (exit 1); exit 1; }; }
- fi
- case $CONFIG_SHELL in
- '')
+if as_func_ret_failure; then
+ exitcode=1
+ echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+ :
+else
+ exitcode=1
+ echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0) || { (exit 1); exit 1; }
+
+(
+ as_lineno_1=\$LINENO
+ as_lineno_2=\$LINENO
+ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
+ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
+") 2> /dev/null; then
+ :
+else
+ as_candidate_shells=
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for as_base in sh bash ksh sh5; do
- case $as_dir in
+ case $as_dir in
/*)
- if ("$as_dir/$as_base" -c '
+ for as_base in sh bash ksh sh5; do
+ as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
+ done;;
+ esac
+done
+IFS=$as_save_IFS
+
+
+ for as_shell in $as_candidate_shells $SHELL; do
+ # Try only shells that exist, to save several forks.
+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+ { ("$as_shell") 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
+
+fi
+
+
+:
+_ASEOF
+}; then
+ CONFIG_SHELL=$as_shell
+ as_have_required=yes
+ if { "$as_shell" 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
+
+fi
+
+
+:
+(as_func_return () {
+ (exit $1)
+}
+as_func_success () {
+ as_func_return 0
+}
+as_func_failure () {
+ as_func_return 1
+}
+as_func_ret_success () {
+ return 0
+}
+as_func_ret_failure () {
+ return 1
+}
+
+exitcode=0
+if as_func_success; then
+ :
+else
+ exitcode=1
+ echo as_func_success failed.
+fi
+
+if as_func_failure; then
+ exitcode=1
+ echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+ :
+else
+ exitcode=1
+ echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+ exitcode=1
+ echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = "$1" ); then
+ :
+else
+ exitcode=1
+ echo positional parameters were not saved.
+fi
+
+test $exitcode = 0) || { (exit 1); exit 1; }
+
+(
as_lineno_1=$LINENO
as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
- CONFIG_SHELL=$as_dir/$as_base
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$0" ${1+"$@"}
- fi;;
- esac
- done
-done
-;;
- esac
+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
+
+_ASEOF
+}; then
+ break
+fi
+
+fi
+
+ done
+
+ if test "x$CONFIG_SHELL" != x; then
+ for as_var in BASH_ENV ENV
+ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+ done
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+fi
+
+
+ if test $as_have_required = no; then
+ echo This script requires a shell more modern than all the
+ echo shells that I found on your system. Please install a
+ echo modern shell, or manually run the script under such a
+ echo shell if you do have one.
+ { (exit 1); exit 1; }
+fi
+
+
+fi
+
+fi
+
+
+
+(eval "as_func_return () {
+ (exit \$1)
+}
+as_func_success () {
+ as_func_return 0
+}
+as_func_failure () {
+ as_func_return 1
+}
+as_func_ret_success () {
+ return 0
+}
+as_func_ret_failure () {
+ return 1
+}
+
+exitcode=0
+if as_func_success; then
+ :
+else
+ exitcode=1
+ echo as_func_success failed.
+fi
+
+if as_func_failure; then
+ exitcode=1
+ echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+ :
+else
+ exitcode=1
+ echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+ exitcode=1
+ echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+ :
+else
+ exitcode=1
+ echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0") || {
+ echo No shell found that supports shell functions.
+ echo Please tell [email protected] about your system,
+ echo including any error possibly output before this
+ echo message
+}
+
+
+
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
# Create $as_me.lineno as a copy of $as_myself, but with $LINENO
# uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line before each line; the second 'sed' does the real
- # work. The second script uses 'N' to pair each line-number line
- # with the numbered line, and appends trailing '-' during
- # substitution so that $LINENO is not a special case at line end.
+ # line-number line after each line using $LINENO; the second 'sed'
+ # does the real work. The second script uses 'N' to pair each
+ # line-number line with the line containing $LINENO, and appends
+ # trailing '-' during substitution so that $LINENO is not a special
+ # case at line end.
# (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
- sed '=' <$as_myself |
+ # scripts with optimization help from Paolo Bonzini. Blame Lee
+ # E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
N
- s,$,-,
- : loop
- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
t loop
- s,-$,,
- s,^['$as_cr_digits']*\n,,
+ s/-\n.*//
' >$as_me.lineno &&
- chmod +x $as_me.lineno ||
+ chmod +x "$as_me.lineno" ||
{ echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
{ (exit 1); exit 1; }; }
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensible to this).
- . ./$as_me.lineno
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
# Exit status is that of the last command.
exit
}
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
- *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T=' ' ;;
- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+ case `echo 'x\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ *) ECHO_C='\c';;
+ esac;;
+*)
+ ECHO_N='-n';;
esac
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
else
as_expr=false
fi
rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir
+fi
echo >conf$$.file
if ln -s conf$$.file conf$$ 2>/dev/null; then
- # We could just check for DJGPP; but this test a) works b) is more generic
- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
- if test -f conf$$.exe; then
- # Don't use ln at all; we don't have any links
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
as_ln_s='cp -p'
- else
- as_ln_s='ln -s'
- fi
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
as_ln_s='cp -p'
fi
-rm -f conf$$ conf$$.exe conf$$.file
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
if mkdir -p . 2>/dev/null; then
as_mkdir_p=:
@@ -222,7 +518,28 @@
as_mkdir_p=false
fi
-as_executable_p="test -f"
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -231,39 +548,27 @@
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" $as_nl"
-
-# CDPATH.
-$as_unset CDPATH
+exec 7<&0 </dev/null 6>&1
# Name of the host.
# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
# so uname gets run too.
ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-exec 6>&1
-
#
# Initializations.
#
ac_default_prefix=/usr/local
+ac_clean_files=
ac_config_libobj_dir=.
+LIBOBJS=
cross_compiling=no
subdirs=
MFLAGS=
MAKEFLAGS=
SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-# This variable seems obsolete. It should probably be removed, and
-# only ac_max_sed_lines should be used.
-: ${ac_max_here_lines=38}
-
# Identity of this package.
PACKAGE_NAME=
PACKAGE_TARNAME=
@@ -272,8 +577,74 @@
PACKAGE_BUGREPORT=
ac_unique_file="lisp/gnus.el"
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS SET_MAKE INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA MAKEINFO EMACS XEMACS EMACS_FLAVOR lispdir etcdir info_dir HAVE_url URL HAVE_w3_forms W3 FLAGS LATEX WITH_FONTS_bembo WITHOUT_FONTS_bembo WITH_FONTS_pfu WITHOUT_FONTS_pfu WITH_FONTS_bcr WITHOUT_FONTS_bcr USE_FONTS LIBOBJS LTLIBOBJS'
+ac_subst_vars='SHELL
+PATH_SEPARATOR
+PACKAGE_NAME
+PACKAGE_TARNAME
+PACKAGE_VERSION
+PACKAGE_STRING
+PACKAGE_BUGREPORT
+exec_prefix
+prefix
+program_transform_name
+bindir
+sbindir
+libexecdir
+datarootdir
+datadir
+sysconfdir
+sharedstatedir
+localstatedir
+includedir
+oldincludedir
+docdir
+infodir
+htmldir
+dvidir
+pdfdir
+psdir
+libdir
+localedir
+mandir
+DEFS
+ECHO_C
+ECHO_N
+ECHO_T
+LIBS
+build_alias
+host_alias
+target_alias
+SET_MAKE
+INSTALL_PROGRAM
+INSTALL_SCRIPT
+INSTALL_DATA
+MAKEINFO
+EMACS
+XEMACS
+EMACS_FLAVOR
+lispdir
+etcdir
+info_dir
+HAVE_url
+URL
+HAVE_w3_forms
+W3
+FLAGS
+LATEX
+WITH_FONTS_bembo
+WITHOUT_FONTS_bembo
+WITH_FONTS_pfu
+WITHOUT_FONTS_pfu
+WITH_FONTS_bcr
+WITHOUT_FONTS_bcr
+USE_FONTS
+LIBOBJS
+LTLIBOBJS'
ac_subst_files=''
+ ac_precious_vars='build_alias
+host_alias
+target_alias'
+
# Initialize some variables set by options.
ac_init_help=
@@ -300,34 +671,48 @@
# and all the variables that are supposed to be based on exec_prefix
# by default will actually change.
# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
includedir='${prefix}/include'
oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
+docdir='${datarootdir}/doc/${PACKAGE}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
ac_prev=
+ac_dashdash=
for ac_option
do
# If the previous option needs an argument, assign it.
if test -n "$ac_prev"; then
- eval "$ac_prev=\$ac_option"
+ eval $ac_prev=\$ac_option
ac_prev=
continue
fi
- ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
+ case $ac_option in
+ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *) ac_optarg=yes ;;
+ esac
# Accept the important Cygnus configure options, so we can diagnose typos.
- case $ac_option in
+ case $ac_dashdash$ac_option in
+ --)
+ ac_dashdash=yes ;;
-bindir | --bindir | --bindi | --bind | --bin | --bi)
ac_prev=bindir ;;
@@ -349,33 +734,45 @@
--config-cache | -C)
cache_file=config.cache ;;
- -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+ -datadir | --datadir | --datadi | --datad)
ac_prev=datadir ;;
- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
- | --da=*)
+ -datadir=* | --datadir=* | --datadi=* | --datad=*)
datadir=$ac_optarg ;;
+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+ | --dataroo | --dataro | --datar)
+ ac_prev=datarootdir ;;
+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+ datarootdir=$ac_optarg ;;
+
-disable-* | --disable-*)
ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
# Reject names that are not valid shell variable names.
- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid feature name: $ac_feature" >&2
{ (exit 1); exit 1; }; }
- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
- eval "enable_$ac_feature=no" ;;
+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
+ eval enable_$ac_feature=no ;;
+
+ -docdir | --docdir | --docdi | --doc | --do)
+ ac_prev=docdir ;;
+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+ docdir=$ac_optarg ;;
+
+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+ ac_prev=dvidir ;;
+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+ dvidir=$ac_optarg ;;
-enable-* | --enable-*)
ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
# Reject names that are not valid shell variable names.
- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid feature name: $ac_feature" >&2
{ (exit 1); exit 1; }; }
- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
- case $ac_option in
- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
- *) ac_optarg=yes ;;
- esac
- eval "enable_$ac_feature='$ac_optarg'" ;;
+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
+ eval enable_$ac_feature=\$ac_optarg ;;
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
@@ -402,6 +799,12 @@
-host=* | --host=* | --hos=* | --ho=*)
host_alias=$ac_optarg ;;
+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+ ac_prev=htmldir ;;
+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+ | --ht=*)
+ htmldir=$ac_optarg ;;
+
-includedir | --includedir | --includedi | --included | --include \
| --includ | --inclu | --incl | --inc)
ac_prev=includedir ;;
@@ -426,13 +829,16 @@
| --libexe=* | --libex=* | --libe=*)
libexecdir=$ac_optarg ;;
+ -localedir | --localedir | --localedi | --localed | --locale)
+ ac_prev=localedir ;;
+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+ localedir=$ac_optarg ;;
+
-localstatedir | --localstatedir | --localstatedi | --localstated \
- | --localstate | --localstat | --localsta | --localst \
- | --locals | --local | --loca | --loc | --lo)
+ | --localstate | --localstat | --localsta | --localst | --locals)
ac_prev=localstatedir ;;
-localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
- | --localstate=* | --localstat=* | --localsta=* | --localst=* \
- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
localstatedir=$ac_optarg ;;
-mandir | --mandir | --mandi | --mand | --man | --ma | --m)
@@ -497,6 +903,16 @@
| --progr-tra=* | --program-tr=* | --program-t=*)
program_transform_name=$ac_optarg ;;
+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+ ac_prev=pdfdir ;;
+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+ pdfdir=$ac_optarg ;;
+
+ -psdir | --psdir | --psdi | --psd | --ps)
+ ac_prev=psdir ;;
+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+ psdir=$ac_optarg ;;
+
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
silent=yes ;;
@@ -549,24 +965,20 @@
-with-* | --with-*)
ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
# Reject names that are not valid shell variable names.
- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid package name: $ac_package" >&2
{ (exit 1); exit 1; }; }
- ac_package=`echo $ac_package| sed 's/-/_/g'`
- case $ac_option in
- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
- *) ac_optarg=yes ;;
- esac
- eval "with_$ac_package='$ac_optarg'" ;;
+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
+ eval with_$ac_package=\$ac_optarg ;;
-without-* | --without-*)
ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
# Reject names that are not valid shell variable names.
- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid package name: $ac_package" >&2
{ (exit 1); exit 1; }; }
- ac_package=`echo $ac_package | sed 's/-/_/g'`
- eval "with_$ac_package=no" ;;
+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
+ eval with_$ac_package=no ;;
--x)
# Obsolete; use --with-x.
@@ -597,8 +1009,7 @@
expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid variable name: $ac_envvar" >&2
{ (exit 1); exit 1; }; }
- ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
- eval "$ac_envvar='$ac_optarg'"
+ eval $ac_envvar=\$ac_optarg
export $ac_envvar ;;
*)
@@ -618,27 +1029,19 @@
{ (exit 1); exit 1; }; }
fi
-# Be sure to have absolute paths.
-for ac_var in exec_prefix prefix
-do
- eval ac_val=$`echo $ac_var`
- case $ac_val in
- [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
- { (exit 1); exit 1; }; };;
- esac
-done
-
-# Be sure to have absolute paths.
-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
- localstatedir libdir includedir oldincludedir infodir mandir
+# Be sure to have absolute directory names.
+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
+ datadir sysconfdir sharedstatedir localstatedir includedir \
+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+ libdir localedir mandir
do
- eval ac_val=$`echo $ac_var`
+ eval ac_val=\$$ac_var
case $ac_val in
- [\\/$]* | ?:[\\/]* ) ;;
- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
- { (exit 1); exit 1; }; };;
+ [\\/$]* | ?:[\\/]* ) continue;;
+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
esac
+ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+ { (exit 1); exit 1; }; }
done
# There might be people who depend on the old broken behavior: `$host'
@@ -665,54 +1068,76 @@
test "$silent" = yes && exec 6>/dev/null
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+ { echo "$as_me: error: Working directory cannot be determined" >&2
+ { (exit 1); exit 1; }; }
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+ { echo "$as_me: error: pwd does not report name of working directory" >&2
+ { (exit 1); exit 1; }; }
+
+
# Find the source files, if location was not specified.
if test -z "$srcdir"; then
ac_srcdir_defaulted=yes
- # Try the directory containing this script, then its parent.
- ac_confdir=`(dirname "$0") 2>/dev/null ||
+ # Try the directory containing this script, then the parent directory.
+ ac_confdir=`$as_dirname -- "$0" ||
$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$0" : 'X\(//\)[^/]' \| \
X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$0" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
srcdir=$ac_confdir
- if test ! -r $srcdir/$ac_unique_file; then
+ if test ! -r "$srcdir/$ac_unique_file"; then
srcdir=..
fi
else
ac_srcdir_defaulted=no
fi
-if test ! -r $srcdir/$ac_unique_file; then
- if test "$ac_srcdir_defaulted" = yes; then
- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
- { (exit 1); exit 1; }; }
- else
- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+if test ! -r "$srcdir/$ac_unique_file"; then
+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
{ (exit 1); exit 1; }; }
- fi
fi
-(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
- { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
{ (exit 1); exit 1; }; }
-srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
-ac_env_build_alias_set=${build_alias+set}
-ac_env_build_alias_value=$build_alias
-ac_cv_env_build_alias_set=${build_alias+set}
-ac_cv_env_build_alias_value=$build_alias
-ac_env_host_alias_set=${host_alias+set}
-ac_env_host_alias_value=$host_alias
-ac_cv_env_host_alias_set=${host_alias+set}
-ac_cv_env_host_alias_value=$host_alias
-ac_env_target_alias_set=${target_alias+set}
-ac_env_target_alias_value=$target_alias
-ac_cv_env_target_alias_set=${target_alias+set}
-ac_cv_env_target_alias_value=$target_alias
+ pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+ srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+ eval ac_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_env_${ac_var}_value=\$${ac_var}
+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
#
# Report the --help message.
@@ -741,9 +1166,6 @@
-n, --no-create do not create output files
--srcdir=DIR find the sources in DIR [configure dir or \`..']
-_ACEOF
-
- cat <<_ACEOF
Installation directories:
--prefix=PREFIX install architecture-independent files in PREFIX
[$ac_default_prefix]
@@ -761,15 +1183,22 @@
--bindir=DIR user executables [EPREFIX/bin]
--sbindir=DIR system admin executables [EPREFIX/sbin]
--libexecdir=DIR program executables [EPREFIX/libexec]
- --datadir=DIR read-only architecture-independent data [PREFIX/share]
--sysconfdir=DIR read-only single-machine data [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
--localstatedir=DIR modifiable single-machine data [PREFIX/var]
--libdir=DIR object code libraries [EPREFIX/lib]
--includedir=DIR C header files [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc [/usr/include]
- --infodir=DIR info documentation [PREFIX/info]
- --mandir=DIR man documentation [PREFIX/man]
+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
+ --infodir=DIR info documentation [DATAROOTDIR/info]
+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
+ --mandir=DIR man documentation [DATAROOTDIR/man]
+ --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE]
+ --htmldir=DIR html documentation [DOCDIR]
+ --dvidir=DIR dvi documentation [DOCDIR]
+ --pdfdir=DIR pdf documentation [DOCDIR]
+ --psdir=DIR ps documentation [DOCDIR]
_ACEOF
cat <<\_ACEOF
@@ -792,118 +1221,86 @@
--with-fonts Assume all fonts required are available
_ACEOF
+ac_status=$?
fi
if test "$ac_init_help" = "recursive"; then
# If there are subdirs, report their specific --help.
- ac_popdir=`pwd`
for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
- test -d $ac_dir || continue
+ test -d "$ac_dir" || continue
ac_builddir=.
-if test "$ac_dir" != .; then
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A "../" for each directory in $ac_dir_suffix.
- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
- ac_dir_suffix= ac_top_builddir=
-fi
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
case $srcdir in
- .) # No --srcdir option. We are building in place.
+ .) # We are building in place.
ac_srcdir=.
- if test -z "$ac_top_builddir"; then
- ac_top_srcdir=.
- else
- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
- fi ;;
- [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir ;;
- *) # Relative path.
- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_builddir$srcdir ;;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
- case "$ac_dir" in
- .) ac_abs_builddir=`pwd`;;
- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
- *) ac_abs_builddir=`pwd`/"$ac_dir";;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
- case ${ac_top_builddir}. in
- .) ac_abs_top_builddir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
- case $ac_srcdir in
- .) ac_abs_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
- case $ac_top_srcdir in
- .) ac_abs_top_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
- esac;;
-esac
-
- cd $ac_dir
- # Check for guested configure; otherwise get Cygnus style configure.
- if test -f $ac_srcdir/configure.gnu; then
- echo
- $SHELL $ac_srcdir/configure.gnu --help=recursive
- elif test -f $ac_srcdir/configure; then
- echo
- $SHELL $ac_srcdir/configure --help=recursive
- elif test -f $ac_srcdir/configure.ac ||
- test -f $ac_srcdir/configure.in; then
- echo
- $ac_configure --help
+ cd "$ac_dir" || { ac_status=$?; continue; }
+ # Check for guested configure.
+ if test -f "$ac_srcdir/configure.gnu"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+ elif test -f "$ac_srcdir/configure"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure" --help=recursive
else
echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
- fi
- cd $ac_popdir
+ fi || ac_status=$?
+ cd "$ac_pwd" || { ac_status=$?; break; }
done
fi
-test -n "$ac_init_help" && exit 0
+test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
+configure
+generated by GNU Autoconf 2.61
-Copyright (C) 2003 Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
- exit 0
+ exit
fi
-exec 5>config.log
-cat >&5 <<_ACEOF
+cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by $as_me, which was
-generated by GNU Autoconf 2.59. Invocation command line was
+generated by GNU Autoconf 2.61. Invocation command line was
$ $0 $@
_ACEOF
+exec 5>>config.log
{
cat <<_ASUNAME
## --------- ##
@@ -922,7 +1319,7 @@
/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
@@ -936,6 +1333,7 @@
test -z "$as_dir" && as_dir=.
echo "PATH: $as_dir"
done
+IFS=$as_save_IFS
} >&5
@@ -957,7 +1355,6 @@
ac_configure_args=
ac_configure_args0=
ac_configure_args1=
-ac_sep=
ac_must_keep_next=false
for ac_pass in 1 2
do
@@ -968,7 +1365,7 @@
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
continue ;;
- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+ *\'*)
ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
case $ac_pass in
@@ -990,9 +1387,7 @@
-* ) ac_must_keep_next=true ;;
esac
fi
- ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
- # Get rid of the leading space.
- ac_sep=" "
+ ac_configure_args="$ac_configure_args '$ac_arg'"
;;
esac
done
@@ -1003,8 +1398,8 @@
# When interrupted or exit'd, cleanup temporary files, and complete
# config.log. We remove comments because anyway the quotes in there
# would cause problems or look ugly.
-# WARNING: Be sure not to use single quotes in there, as some shells,
-# such as our DU 5.0 friend, will then `close' the trap.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
trap 'exit_status=$?
# Save into config.log some information that might help in debugging.
{
@@ -1017,20 +1412,34 @@
_ASBOX
echo
# The following way of writing the cache mishandles newlines in values,
-{
+(
+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ *) $as_unset $ac_var ;;
+ esac ;;
+ esac
+ done
(set) 2>&1 |
- case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
- *ac_space=\ *)
+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
sed -n \
- "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
- ;;
+ "s/'\''/'\''\\\\'\'''\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+ ;; #(
*)
- sed -n \
- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
;;
- esac;
-}
+ esac |
+ sort
+)
echo
cat <<\_ASBOX
@@ -1041,22 +1450,28 @@
echo
for ac_var in $ac_subst_vars
do
- eval ac_val=$`echo $ac_var`
- echo "$ac_var='"'"'$ac_val'"'"'"
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ echo "$ac_var='\''$ac_val'\''"
done | sort
echo
if test -n "$ac_subst_files"; then
cat <<\_ASBOX
-## ------------- ##
-## Output files. ##
-## ------------- ##
+## ------------------- ##
+## File substitutions. ##
+## ------------------- ##
_ASBOX
echo
for ac_var in $ac_subst_files
do
- eval ac_val=$`echo $ac_var`
- echo "$ac_var='"'"'$ac_val'"'"'"
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ echo "$ac_var='\''$ac_val'\''"
done | sort
echo
fi
@@ -1068,26 +1483,24 @@
## ----------- ##
_ASBOX
echo
- sed "/^$/d" confdefs.h | sort
+ cat confdefs.h
echo
fi
test "$ac_signal" != 0 &&
echo "$as_me: caught signal $ac_signal"
echo "$as_me: exit $exit_status"
} >&5
- rm -f core *.core &&
- rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
+ rm -f core *.core core.conftest.* &&
+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
exit $exit_status
- ' 0
+' 0
for ac_signal in 1 2 13 15; do
trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
done
ac_signal=0
# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo >confdefs.h
+rm -f -r conftest* confdefs.h
# Predefined preprocessor variables.
@@ -1118,14 +1531,17 @@
# Let the site file select an alternate cache file if it wants to.
# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
- fi
+if test -n "$CONFIG_SITE"; then
+ set x "$CONFIG_SITE"
+elif test "x$prefix" != xNONE; then
+ set x "$prefix/share/config.site" "$prefix/etc/config.site"
+else
+ set x "$ac_default_prefix/share/config.site" \
+ "$ac_default_prefix/etc/config.site"
fi
-for ac_site_file in $CONFIG_SITE; do
+shift
+for ac_site_file
+do
if test -r "$ac_site_file"; then
{ echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
echo "$as_me: loading site script $ac_site_file" >&6;}
@@ -1141,8 +1557,8 @@
{ echo "$as_me:$LINENO: loading cache $cache_file" >&5
echo "$as_me: loading cache $cache_file" >&6;}
case $cache_file in
- [\\/]* | ?:[\\/]* ) . $cache_file;;
- *) . ./$cache_file;;
+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
+ *) . "./$cache_file";;
esac
fi
else
@@ -1154,12 +1570,11 @@
# Check that the precious variables saved in the cache have kept the same
# value.
ac_cache_corrupted=false
-for ac_var in `(set) 2>&1 |
- sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+for ac_var in $ac_precious_vars; do
eval ac_old_set=\$ac_cv_env_${ac_var}_set
eval ac_new_set=\$ac_env_${ac_var}_set
- eval ac_old_val="\$ac_cv_env_${ac_var}_value"
- eval ac_new_val="\$ac_env_${ac_var}_value"
+ eval ac_old_val=\$ac_cv_env_${ac_var}_value
+ eval ac_new_val=\$ac_env_${ac_var}_value
case $ac_old_set,$ac_new_set in
set,)
{ echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
@@ -1184,8 +1599,7 @@
# Pass precious variables to config.status.
if test "$ac_new_set" = set; then
case $ac_new_val in
- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
- ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
*) ac_arg=$ac_var=$ac_new_val ;;
esac
case " $ac_configure_args " in
@@ -1202,12 +1616,6 @@
{ (exit 1); exit 1; }; }
fi
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
@@ -1224,61 +1632,73 @@
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
+{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
+set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
all:
- @echo 'ac_maketemp="$(MAKE)"'
+ @echo '@@@%%%=$(MAKE)=@@@%%%'
_ACEOF
# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
- eval ac_cv_prog_make_${ac_make}_set=yes
-else
- eval ac_cv_prog_make_${ac_make}_set=no
-fi
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+ *@@@%%%=?*=@@@%%%*)
+ eval ac_cv_prog_make_${ac_make}_set=yes;;
+ *)
+ eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
rm -f conftest.make
fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+ { echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
SET_MAKE=
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
SET_MAKE="MAKE=${MAKE-make}"
fi
ac_aux_dir=
-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
- if test -f $ac_dir/install-sh; then
+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+ if test -f "$ac_dir/install-sh"; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
break
- elif test -f $ac_dir/install.sh; then
+ elif test -f "$ac_dir/install.sh"; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install.sh -c"
break
- elif test -f $ac_dir/shtool; then
+ elif test -f "$ac_dir/shtool"; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/shtool install -c"
break
fi
done
if test -z "$ac_aux_dir"; then
- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
+echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
{ (exit 1); exit 1; }; }
fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
+
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
@@ -1293,8 +1713,8 @@
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# OS/2's system install, which has a completely different semantic
# ./install, which can be erroneously created by make from ./install.sh.
-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
if test -z "$INSTALL"; then
if test "${ac_cv_path_install+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
@@ -1316,7 +1736,7 @@
# by default.
for ac_prog in ginstall scoinst install; do
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
if test $ac_prog = install &&
grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
@@ -1335,21 +1755,22 @@
;;
esac
done
+IFS=$as_save_IFS
fi
if test "${ac_cv_path_install+set}" = set; then
INSTALL=$ac_cv_path_install
else
- # As a last resort, use the slow shell script. We don't cache a
- # path for INSTALL within a source directory, because that will
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for INSTALL within a source directory, because that will
# break other packages using the cache if that directory is
- # removed, or if the path is relative.
+ # removed, or if the value is a relative name.
INSTALL=$ac_install_sh
fi
fi
-echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6
+{ echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6; }
# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
@@ -1365,21 +1786,21 @@
fi
-# Check whether --with-xemacs or --without-xemacs was given.
+# Check whether --with-xemacs was given.
if test "${with_xemacs+set}" = set; then
- withval="$with_xemacs"
- if test "${withval}" = "yes"; then EMACS=xemacs; else EMACS=${withval}; fi
-fi;
+ withval=$with_xemacs; if test "${withval}" = "yes"; then EMACS=xemacs; else EMACS=${withval}; fi
+fi
-# Check whether --with-emacs or --without-emacs was given.
+
+# Check whether --with-emacs was given.
if test "${with_emacs+set}" = set; then
- withval="$with_emacs"
- if test "${withval}" = "yes"; then EMACS=emacs; else EMACS=${withval}; fi
-fi;
+ withval=$with_emacs; if test "${withval}" = "yes"; then EMACS=emacs; else EMACS=${withval}; fi
+fi
+
# Extract the first word of "makeinfo", so it can be a program name with args.
set dummy makeinfo; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_MAKEINFO+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -1392,31 +1813,33 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_MAKEINFO="makeinfo"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
test -z "$ac_cv_prog_MAKEINFO" && ac_cv_prog_MAKEINFO="no"
fi
fi
MAKEINFO=$ac_cv_prog_MAKEINFO
if test -n "$MAKEINFO"; then
- echo "$as_me:$LINENO: result: $MAKEINFO" >&5
-echo "${ECHO_T}$MAKEINFO" >&6
+ { echo "$as_me:$LINENO: result: $MAKEINFO" >&5
+echo "${ECHO_T}$MAKEINFO" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
# Extract the first word of "emacs", so it can be a program name with args.
set dummy emacs; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_EMACS+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -1429,36 +1852,38 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_EMACS="emacs"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
test -z "$ac_cv_prog_EMACS" && ac_cv_prog_EMACS="xemacs"
fi
fi
EMACS=$ac_cv_prog_EMACS
if test -n "$EMACS"; then
- echo "$as_me:$LINENO: result: $EMACS" >&5
-echo "${ECHO_T}$EMACS" >&6
+ { echo "$as_me:$LINENO: result: $EMACS" >&5
+echo "${ECHO_T}$EMACS" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
- echo "$as_me:$LINENO: checking if $EMACS is really XEmacs" >&5
-echo $ECHO_N "checking if $EMACS is really XEmacs... $ECHO_C" >&6
+
+ { echo "$as_me:$LINENO: checking if $EMACS is really XEmacs" >&5
+echo $ECHO_N "checking if $EMACS is really XEmacs... $ECHO_C" >&6; }
elisp="(if (string-match \"XEmacs\" emacs-version) \"yes\" \"no\") "
if test -z ""noecho""; then
- echo "$as_me:$LINENO: checking for xemacsp" >&5
-echo $ECHO_N "checking for xemacsp... $ECHO_C" >&6
+ { echo "$as_me:$LINENO: checking for xemacsp" >&5
+echo $ECHO_N "checking for xemacsp... $ECHO_C" >&6; }
fi
if test "${EMACS_cv_SYS_xemacsp+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
@@ -1476,8 +1901,8 @@
xemacsp=${EMACS_cv_SYS_xemacsp}
if test -z ""noecho""; then
- echo "$as_me:$LINENO: result: $xemacsp" >&5
-echo "${ECHO_T}$xemacsp" >&6
+ { echo "$as_me:$LINENO: result: $xemacsp" >&5
+echo "${ECHO_T}$xemacsp" >&6; }
fi
XEMACS=${EMACS_cv_SYS_xemacsp}
@@ -1485,19 +1910,19 @@
if test "$XEMACS" = "yes"; then
EMACS_FLAVOR=xemacs
fi
- echo "$as_me:$LINENO: result: $XEMACS" >&5
-echo "${ECHO_T}$XEMACS" >&6
+ { echo "$as_me:$LINENO: result: $XEMACS" >&5
+echo "${ECHO_T}$XEMACS" >&6; }
if test "$prefix" = "NONE"; then
- echo "$as_me:$LINENO: checking prefix for your Emacs" >&5
-echo $ECHO_N "checking prefix for your Emacs... $ECHO_C" >&6
+ { echo "$as_me:$LINENO: checking prefix for your Emacs" >&5
+echo $ECHO_N "checking prefix for your Emacs... $ECHO_C" >&6; }
elisp="(expand-file-name \"..\" invocation-directory)"
if test -z ""noecho""; then
- echo "$as_me:$LINENO: checking for prefix" >&5
-echo $ECHO_N "checking for prefix... $ECHO_C" >&6
+ { echo "$as_me:$LINENO: checking for prefix" >&5
+echo $ECHO_N "checking for prefix... $ECHO_C" >&6; }
fi
if test "${EMACS_cv_SYS_prefix+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
@@ -1515,22 +1940,22 @@
prefix=${EMACS_cv_SYS_prefix}
if test -z ""noecho""; then
- echo "$as_me:$LINENO: result: $prefix" >&5
-echo "${ECHO_T}$prefix" >&6
+ { echo "$as_me:$LINENO: result: $prefix" >&5
+echo "${ECHO_T}$prefix" >&6; }
fi
prefix=${EMACS_cv_SYS_prefix}
- echo "$as_me:$LINENO: result: $prefix" >&5
-echo "${ECHO_T}$prefix" >&6
+ { echo "$as_me:$LINENO: result: $prefix" >&5
+echo "${ECHO_T}$prefix" >&6; }
fi
-# Check whether --with-lispdir or --without-lispdir was given.
+# Check whether --with-lispdir was given.
if test "${with_lispdir+set}" = set; then
- withval="$with_lispdir"
- lispdir=${withval}
-fi;
- echo "$as_me:$LINENO: checking where .elc files should go" >&5
-echo $ECHO_N "checking where .elc files should go... $ECHO_C" >&6
+ withval=$with_lispdir; lispdir=${withval}
+fi
+
+ { echo "$as_me:$LINENO: checking where .elc files should go" >&5
+echo $ECHO_N "checking where .elc files should go... $ECHO_C" >&6; }
if test -z "$lispdir"; then
theprefix=$prefix
if test "x$theprefix" = "xNONE"; then
@@ -1544,7 +1969,7 @@
fi
for thedir in share lib; do
potential=
- if test -d ${theprefix}/${thedir}/${EMACS_FLAVOR}/site-lisp; then
+ if test -d "${theprefix}/${thedir}/${EMACS_FLAVOR}/site-lisp"; then
if test "$EMACS_FLAVOR" = "xemacs"; then
lispdir="\$(prefix)/${thedir}/${EMACS_FLAVOR}/site-packages/lisp/gnus"
else
@@ -1554,19 +1979,19 @@
fi
done
fi
- echo "$as_me:$LINENO: result: $lispdir" >&5
-echo "${ECHO_T}$lispdir" >&6
+ { echo "$as_me:$LINENO: result: $lispdir" >&5
+echo "${ECHO_T}$lispdir" >&6; }
-# Check whether --with-etcdir or --without-etcdir was given.
+# Check whether --with-etcdir was given.
if test "${with_etcdir+set}" = set; then
- withval="$with_etcdir"
- etcdir=${withval}
-fi;
- echo "$as_me:$LINENO: checking where etc files should go" >&5
-echo $ECHO_N "checking where etc files should go... $ECHO_C" >&6
+ withval=$with_etcdir; etcdir=${withval}
+fi
+
+ { echo "$as_me:$LINENO: checking where etc files should go" >&5
+echo $ECHO_N "checking where etc files should go... $ECHO_C" >&6; }
if test -z "$etcdir"; then
if test "$EMACS_FLAVOR" = "xemacs"; then
etcdir="\$(lispdir)/../../etc"
@@ -1574,13 +1999,13 @@
etcdir="\$(lispdir)/../../etc"
fi
fi
- echo "$as_me:$LINENO: result: $etcdir" >&5
-echo "${ECHO_T}$etcdir" >&6
+ { echo "$as_me:$LINENO: result: $etcdir" >&5
+echo "${ECHO_T}$etcdir" >&6; }
- echo "$as_me:$LINENO: checking where the TeXinfo docs should go" >&5
-echo $ECHO_N "checking where the TeXinfo docs should go... $ECHO_C" >&6
+ { echo "$as_me:$LINENO: checking where the TeXinfo docs should go" >&5
+echo $ECHO_N "checking where the TeXinfo docs should go... $ECHO_C" >&6; }
if test "$infodir" = "\${prefix}/info"; then
if test "$EMACS_FLAVOR" = "xemacs"; then
info_dir="\$(prefix)/${thedir}/${EMACS_FLAVOR}/site-packages/info"
@@ -1590,28 +2015,28 @@
else
info_dir=$infodir
fi
- echo "$as_me:$LINENO: result: $info_dir" >&5
-echo "${ECHO_T}$info_dir" >&6
+ { echo "$as_me:$LINENO: result: $info_dir" >&5
+echo "${ECHO_T}$info_dir" >&6; }
-echo "$as_me:$LINENO: checking for acceptable URL version" >&5
-echo $ECHO_N "checking for acceptable URL version... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for acceptable URL version" >&5
+echo $ECHO_N "checking for acceptable URL version... $ECHO_C" >&6; }
if test "${EMACS_cv_ACCEPTABLE_URL+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -z ""noecho""; then
- echo "$as_me:$LINENO: checking for url-retrieve in url" >&5
-echo $ECHO_N "checking for url-retrieve in url... $ECHO_C" >&6
+ { echo "$as_me:$LINENO: checking for url-retrieve in url" >&5
+echo $ECHO_N "checking for url-retrieve in url... $ECHO_C" >&6; }
fi
library=`echo url | tr _ -`
elisp="(progn (fmakunbound 'url-retrieve) (condition-case nil (progn (require '$library) (fboundp 'url-retrieve)) (error (prog1 nil (message \"$library not found\")))))"
if test -z ""noecho""; then
- echo "$as_me:$LINENO: checking for url" >&5
-echo $ECHO_N "checking for url... $ECHO_C" >&6
+ { echo "$as_me:$LINENO: checking for url" >&5
+echo $ECHO_N "checking for url... $ECHO_C" >&6; }
fi
if test "${EMACS_cv_SYS_url+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
@@ -1629,8 +2054,8 @@
url=${EMACS_cv_SYS_url}
if test -z ""noecho""; then
- echo "$as_me:$LINENO: result: $url" >&5
-echo "${ECHO_T}$url" >&6
+ { echo "$as_me:$LINENO: result: $url" >&5
+echo "${ECHO_T}$url" >&6; }
fi
if test "${EMACS_cv_SYS_url}" = "nil"; then
@@ -1642,8 +2067,8 @@
HAVE_url=${EMACS_cv_SYS_url}
if test -z ""noecho""; then
- echo "$as_me:$LINENO: result: $HAVE_url" >&5
-echo "${ECHO_T}$HAVE_url" >&6
+ { echo "$as_me:$LINENO: result: $HAVE_url" >&5
+echo "${ECHO_T}$HAVE_url" >&6; }
fi
if test "${HAVE_url}" = "yes"; then
@@ -1656,8 +2081,8 @@
elisp="(file-name-directory (locate-library \"url\"))"
if test -z ""noecho""; then
- echo "$as_me:$LINENO: checking for url_dir" >&5
-echo $ECHO_N "checking for url_dir... $ECHO_C" >&6
+ { echo "$as_me:$LINENO: checking for url_dir" >&5
+echo $ECHO_N "checking for url_dir... $ECHO_C" >&6; }
fi
if test "${EMACS_cv_SYS_url_dir+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
@@ -1675,8 +2100,8 @@
url_dir=${EMACS_cv_SYS_url_dir}
if test -z ""noecho""; then
- echo "$as_me:$LINENO: result: $url_dir" >&5
-echo "${ECHO_T}$url_dir" >&6
+ { echo "$as_me:$LINENO: result: $url_dir" >&5
+echo "${ECHO_T}$url_dir" >&6; }
fi
EMACS_cv_ACCEPTABLE_URL=$EMACS_cv_SYS_url_dir
@@ -1685,34 +2110,34 @@
fi
-# Check whether --with-url or --without-url was given.
+# Check whether --with-url was given.
if test "${with_url+set}" = set; then
- withval="$with_url"
- EMACS_cv_ACCEPTABLE_URL=`( cd $withval && pwd || echo "$withval" ) 2> /dev/null`
-fi;
+ withval=$with_url; EMACS_cv_ACCEPTABLE_URL=`( cd $withval && pwd || echo "$withval" ) 2> /dev/null`
+fi
+
URL=${EMACS_cv_ACCEPTABLE_URL}
- echo "$as_me:$LINENO: result: \"${URL}\"" >&5
-echo "${ECHO_T}\"${URL}\"" >&6
+ { echo "$as_me:$LINENO: result: \"${URL}\"" >&5
+echo "${ECHO_T}\"${URL}\"" >&6; }
-echo "$as_me:$LINENO: checking for acceptable W3 version" >&5
-echo $ECHO_N "checking for acceptable W3 version... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for acceptable W3 version" >&5
+echo $ECHO_N "checking for acceptable W3 version... $ECHO_C" >&6; }
if test "${EMACS_cv_ACCEPTABLE_W3+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -z ""noecho""; then
- echo "$as_me:$LINENO: checking for w3-form-encode-xwfu in w3_forms" >&5
-echo $ECHO_N "checking for w3-form-encode-xwfu in w3_forms... $ECHO_C" >&6
+ { echo "$as_me:$LINENO: checking for w3-form-encode-xwfu in w3_forms" >&5
+echo $ECHO_N "checking for w3-form-encode-xwfu in w3_forms... $ECHO_C" >&6; }
fi
library=`echo w3_forms | tr _ -`
elisp="(progn (fmakunbound 'w3-form-encode-xwfu) (condition-case nil (progn (require '$library) (fboundp 'w3-form-encode-xwfu)) (error (prog1 nil (message \"$library not found\")))))"
if test -z ""noecho""; then
- echo "$as_me:$LINENO: checking for w3_forms" >&5
-echo $ECHO_N "checking for w3_forms... $ECHO_C" >&6
+ { echo "$as_me:$LINENO: checking for w3_forms" >&5
+echo $ECHO_N "checking for w3_forms... $ECHO_C" >&6; }
fi
if test "${EMACS_cv_SYS_w3_forms+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
@@ -1730,8 +2155,8 @@
w3_forms=${EMACS_cv_SYS_w3_forms}
if test -z ""noecho""; then
- echo "$as_me:$LINENO: result: $w3_forms" >&5
-echo "${ECHO_T}$w3_forms" >&6
+ { echo "$as_me:$LINENO: result: $w3_forms" >&5
+echo "${ECHO_T}$w3_forms" >&6; }
fi
if test "${EMACS_cv_SYS_w3_forms}" = "nil"; then
@@ -1743,8 +2168,8 @@
HAVE_w3_forms=${EMACS_cv_SYS_w3_forms}
if test -z ""noecho""; then
- echo "$as_me:$LINENO: result: $HAVE_w3_forms" >&5
-echo "${ECHO_T}$HAVE_w3_forms" >&6
+ { echo "$as_me:$LINENO: result: $HAVE_w3_forms" >&5
+echo "${ECHO_T}$HAVE_w3_forms" >&6; }
fi
if test "${HAVE_w3_forms}" = "yes"; then
@@ -1757,8 +2182,8 @@
elisp="(file-name-directory (locate-library \"w3-forms\"))"
if test -z ""noecho""; then
- echo "$as_me:$LINENO: checking for w3_dir" >&5
-echo $ECHO_N "checking for w3_dir... $ECHO_C" >&6
+ { echo "$as_me:$LINENO: checking for w3_dir" >&5
+echo $ECHO_N "checking for w3_dir... $ECHO_C" >&6; }
fi
if test "${EMACS_cv_SYS_w3_dir+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
@@ -1776,8 +2201,8 @@
w3_dir=${EMACS_cv_SYS_w3_dir}
if test -z ""noecho""; then
- echo "$as_me:$LINENO: result: $w3_dir" >&5
-echo "${ECHO_T}$w3_dir" >&6
+ { echo "$as_me:$LINENO: result: $w3_dir" >&5
+echo "${ECHO_T}$w3_dir" >&6; }
fi
EMACS_cv_ACCEPTABLE_W3=$EMACS_cv_SYS_w3_dir
@@ -1786,19 +2211,19 @@
fi
-# Check whether --with-w3 or --without-w3 was given.
+# Check whether --with-w3 was given.
if test "${with_w3+set}" = set; then
- withval="$with_w3"
- EMACS_cv_ACCEPTABLE_W3=`( cd $withval && pwd || echo "$withval" ) 2> /dev/null`
-fi;
+ withval=$with_w3; EMACS_cv_ACCEPTABLE_W3=`( cd $withval && pwd || echo "$withval" ) 2> /dev/null`
+fi
+
W3=${EMACS_cv_ACCEPTABLE_W3}
- echo "$as_me:$LINENO: result: \"${W3}\"" >&5
-echo "${ECHO_T}\"${W3}\"" >&6
+ { echo "$as_me:$LINENO: result: \"${W3}\"" >&5
+echo "${ECHO_T}\"${W3}\"" >&6; }
- echo "$as_me:$LINENO: checking which options to pass on to (X)Emacs" >&5
-echo $ECHO_N "checking which options to pass on to (X)Emacs... $ECHO_C" >&6
+ { echo "$as_me:$LINENO: checking which options to pass on to (X)Emacs" >&5
+echo $ECHO_N "checking which options to pass on to (X)Emacs... $ECHO_C" >&6; }
if test "x$FLAGS" = "x"; then
if test "$EMACS_FLAVOR" = "xemacs"; then
FLAGS="-batch -no-autoloads -l \$(srcdir)/dgnushack.el"
@@ -1808,8 +2233,8 @@
else
FLAGS=$FLAGS
fi
- echo "$as_me:$LINENO: result: $FLAGS" >&5
-echo "${ECHO_T}$FLAGS" >&6
+ { echo "$as_me:$LINENO: result: $FLAGS" >&5
+echo "${ECHO_T}$FLAGS" >&6; }
@@ -1818,8 +2243,8 @@
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_path_LATEX+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -1834,39 +2259,40 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_path_LATEX="$as_dir/$ac_word$ac_exec_ext"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
;;
esac
fi
LATEX=$ac_cv_path_LATEX
-
if test -n "$LATEX"; then
- echo "$as_me:$LINENO: result: $LATEX" >&5
-echo "${ECHO_T}$LATEX" >&6
+ { echo "$as_me:$LINENO: result: $LATEX" >&5
+echo "${ECHO_T}$LATEX" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
test -n "$LATEX" && break
done
test -n "$LATEX" || LATEX="no"
-echo "$as_me:$LINENO: checking for available fonts" >&5
-echo $ECHO_N "checking for available fonts... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for available fonts" >&5
+echo $ECHO_N "checking for available fonts... $ECHO_C" >&6; }
-# Check whether --with-fonts or --without-fonts was given.
+# Check whether --with-fonts was given.
if test "${with_fonts+set}" = set; then
- withval="$with_fonts"
- USE_FONTS="$withval"
-fi;
+ withval=$with_fonts; USE_FONTS="$withval"
+fi
+
WITH_FONTS_bembo='%'
WITHOUT_FONTS_bembo=
WITH_FONTS_pfu='%'
@@ -1936,8 +2362,8 @@
USE_FONTS=no
fi
USE_FONTS=`echo "${USE_FONTS}" | sed 's/,\([^,]*\)$/ and\1/'`
-echo "$as_me:$LINENO: result: \"${USE_FONTS}\"" >&5
-echo "${ECHO_T}\"${USE_FONTS}\"" >&6
+{ echo "$as_me:$LINENO: result: \"${USE_FONTS}\"" >&5
+echo "${ECHO_T}\"${USE_FONTS}\"" >&6; }
if test "${USE_FONTS}" = yes ; then
USE_FONTS='Set in Adobe Bembo, Adobe Futura and Bitstream Courier.'
elif test "${USE_FONTS}" = no ; then
@@ -1948,7 +2374,8 @@
- ac_config_files="$ac_config_files Makefile etc/Makefile lisp/Makefile texi/Makefile texi/gnusconfig.tex texi/ps/Makefile"
+ac_config_files="$ac_config_files Makefile etc/Makefile lisp/Makefile texi/Makefile texi/gnusconfig.tex texi/ps/Makefile"
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
@@ -1967,39 +2394,58 @@
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
+# So, we kill variables containing newlines.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
-{
+(
+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ *) $as_unset $ac_var ;;
+ esac ;;
+ esac
+ done
+
(set) 2>&1 |
- case `(ac_space=' '; set | grep ac_space) 2>&1` in
- *ac_space=\ *)
+ case $as_nl`(ac_space=' '; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
# `set' does not quote correctly, so add quotes (double-quote
# substitution turns \\\\ into \\, and sed turns \\ into \).
sed -n \
"s/'/'\\\\''/g;
s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
- ;;
+ ;; #(
*)
# `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n \
- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
;;
- esac;
-} |
+ esac |
+ sort
+) |
sed '
+ /^ac_cv_env_/b end
t clear
- : clear
+ :clear
s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
t end
- /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
- : end' >>confcache
-if diff $cache_file confcache >/dev/null 2>&1; then :; else
- if test -w $cache_file; then
- test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+ if test -w "$cache_file"; then
+ test "x$cache_file" != "x/dev/null" &&
+ { echo "$as_me:$LINENO: updating cache $cache_file" >&5
+echo "$as_me: updating cache $cache_file" >&6;}
cat confcache >$cache_file
else
- echo "not updating unwritable cache $cache_file"
+ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
+echo "$as_me: not updating unwritable cache $cache_file" >&6;}
fi
fi
rm -f confcache
@@ -2008,63 +2454,48 @@
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=/{
-s/:*\$(srcdir):*/:/;
-s/:*\${srcdir}:*/:/;
-s/:*@srcdir@:*/:/;
-s/^\([^=]*=[ ]*\):*/\1/;
-s/:*$//;
-s/^[^=]*=[ ]*$//;
-}'
-fi
-
# Transform confdefs.h into DEFS.
# Protect against shell expansion while executing Makefile rules.
# Protect against Makefile macro expansion.
#
# If the first sed substitution is executed (which looks for macros that
-# take arguments), then we branch to the quote section. Otherwise,
+# take arguments), then branch to the quote section. Otherwise,
# look for a macro that doesn't take arguments.
-cat >confdef2opt.sed <<\_ACEOF
+ac_script='
t clear
-: clear
-s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
+:clear
+s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g
t quote
-s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
+s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g
t quote
-d
-: quote
-s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
-s,\[,\\&,g
-s,\],\\&,g
-s,\$,$$,g
-p
-_ACEOF
-# We use echo to avoid assuming a particular line-breaking character.
-# The extra dot is to prevent the shell from consuming trailing
-# line-breaks from the sub-command output. A line-break within
-# single-quotes doesn't work because, if this script is created in a
-# platform that uses two characters for line-breaks (e.g., DOS), tr
-# would break.
-ac_LF_and_DOT=`echo; echo .`
-DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
-rm -f confdef2opt.sed
+b any
+:quote
+s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g
+s/\[/\\&/g
+s/\]/\\&/g
+s/\$/$$/g
+H
+:any
+${
+ g
+ s/^\n//
+ s/\n/ /g
+ p
+}
+'
+DEFS=`sed -n "$ac_script" confdefs.h`
ac_libobjs=
ac_ltlibobjs=
for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
# 1. Remove the extension, and $U if already installed.
- ac_i=`echo "$ac_i" |
- sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
- # 2. Add them.
- ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
- ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+ ac_i=`echo "$ac_i" | sed "$ac_script"`
+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
+ # will be set to the directory where LIBOBJS objects are built.
+ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
done
LIBOBJS=$ac_libobjs
@@ -2095,17 +2526,45 @@
## M4sh Initialization. ##
## --------------------- ##
-# Be Bourne compatible
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
# Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
- set -o posix
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
+
+fi
+
+
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
fi
-DUALCASE=1; export DUALCASE # for MKS sh
# Support unset when possible.
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
@@ -2115,8 +2574,43 @@
fi
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+as_nl='
+'
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ { (exit 1); exit 1; }
+fi
+
# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
PS1='$ '
PS2='> '
PS4='+ '
@@ -2130,18 +2624,19 @@
if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
eval $as_var=C; export $as_var
else
- $as_unset $as_var
+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
fi
done
# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
else
as_expr=false
fi
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
as_basename=basename
else
as_basename=false
@@ -2149,159 +2644,120 @@
# Name of the executable.
-as_me=`$as_basename "$0" ||
+as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)$' \| \
- . : '\(.\)' 2>/dev/null ||
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
- /^X\/\(\/\/\)$/{ s//\1/; q; }
- /^X\/\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
-
-
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
+# CDPATH.
+$as_unset CDPATH
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" || {
- # Find who we are. Look in the path if we contain no path at all
- # relative or not.
- case $0 in
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
- ;;
- esac
- # We did not find ourselves, most probably we were run as `sh COMMAND'
- # in which case we are not to be found in the path.
- if test "x$as_myself" = x; then
- as_myself=$0
- fi
- if test ! -f "$as_myself"; then
- { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
- { (exit 1); exit 1; }; }
- fi
- case $CONFIG_SHELL in
- '')
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for as_base in sh bash ksh sh5; do
- case $as_dir in
- /*)
- if ("$as_dir/$as_base" -c '
as_lineno_1=$LINENO
as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
- CONFIG_SHELL=$as_dir/$as_base
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$0" ${1+"$@"}
- fi;;
- esac
- done
-done
-;;
- esac
+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
# Create $as_me.lineno as a copy of $as_myself, but with $LINENO
# uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line before each line; the second 'sed' does the real
- # work. The second script uses 'N' to pair each line-number line
- # with the numbered line, and appends trailing '-' during
- # substitution so that $LINENO is not a special case at line end.
+ # line-number line after each line using $LINENO; the second 'sed'
+ # does the real work. The second script uses 'N' to pair each
+ # line-number line with the line containing $LINENO, and appends
+ # trailing '-' during substitution so that $LINENO is not a special
+ # case at line end.
# (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
- sed '=' <$as_myself |
+ # scripts with optimization help from Paolo Bonzini. Blame Lee
+ # E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
N
- s,$,-,
- : loop
- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
t loop
- s,-$,,
- s,^['$as_cr_digits']*\n,,
+ s/-\n.*//
' >$as_me.lineno &&
- chmod +x $as_me.lineno ||
- { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
+ chmod +x "$as_me.lineno" ||
+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
{ (exit 1); exit 1; }; }
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensible to this).
- . ./$as_me.lineno
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
# Exit status is that of the last command.
exit
}
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
- *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T=' ' ;;
- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+ case `echo 'x\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ *) ECHO_C='\c';;
+ esac;;
+*)
+ ECHO_N='-n';;
esac
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
else
as_expr=false
fi
rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir
+fi
echo >conf$$.file
if ln -s conf$$.file conf$$ 2>/dev/null; then
- # We could just check for DJGPP; but this test a) works b) is more generic
- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
- if test -f conf$$.exe; then
- # Don't use ln at all; we don't have any links
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
as_ln_s='cp -p'
- else
- as_ln_s='ln -s'
- fi
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
as_ln_s='cp -p'
fi
-rm -f conf$$ conf$$.exe conf$$.file
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
if mkdir -p . 2>/dev/null; then
as_mkdir_p=:
@@ -2310,7 +2766,28 @@
as_mkdir_p=false
fi
-as_executable_p="test -f"
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -2319,31 +2796,14 @@
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" $as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
exec 6>&1
-# Open the log real soon, to keep \$[0] and so on meaningful, and to
+# Save the log message, to keep $[0] and so on meaningful, and to
# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling. Logging --version etc. is OK.
-exec 5>>config.log
-{
- echo
- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-} >&5
-cat >&5 <<_CSEOF
-
+# values after options handling.
+ac_log="
This file was extended by $as_me, which was
-generated by GNU Autoconf 2.59. Invocation command line was
+generated by GNU Autoconf 2.61. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
@@ -2351,30 +2811,18 @@
CONFIG_COMMANDS = $CONFIG_COMMANDS
$ $0 $@
-_CSEOF
-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
-echo >&5
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
# Files that config.status was made for.
-if test -n "$ac_config_files"; then
- echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_headers"; then
- echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_links"; then
- echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
-fi
+config_files="$ac_config_files"
-if test -n "$ac_config_commands"; then
- echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
-fi
+_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
-
ac_cs_usage="\
\`$as_me' instantiates files from templates according to the
current configuration.
@@ -2382,7 +2830,7 @@
Usage: $0 [OPTIONS] [FILE]...
-h, --help print this help, then exit
- -V, --version print version number, then exit
+ -V, --version print version number and configuration settings, then exit
-q, --quiet do not print progress messages
-d, --debug don't remove temporary files
--recheck update $as_me by reconfiguring in the same conditions
@@ -2393,19 +2841,21 @@
$config_files
Report bugs to <[email protected]>."
-_ACEOF
+_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
ac_cs_version="\\
config.status
-configured by $0, generated by GNU Autoconf 2.59,
- with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
+configured by $0, generated by GNU Autoconf 2.61,
+ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
-Copyright (C) 2003 Free Software Foundation, Inc.
+Copyright (C) 2006 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
-srcdir=$srcdir
-INSTALL="$INSTALL"
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
@@ -2416,60 +2866,42 @@
do
case $1 in
--*=*)
- ac_option=`expr "x$1" : 'x\([^=]*\)='`
- ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
ac_shift=:
;;
- -*)
+ *)
ac_option=$1
ac_optarg=$2
ac_shift=shift
;;
- *) # This is not an option, so the user has probably given explicit
- # arguments.
- ac_option=$1
- ac_need_defaults=false;;
esac
case $ac_option in
# Handling of the options.
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
ac_cs_recheck=: ;;
- --version | --vers* | -V )
- echo "$ac_cs_version"; exit 0 ;;
- --he | --h)
- # Conflict between --help and --header
- { { echo "$as_me:$LINENO: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2;}
- { (exit 1); exit 1; }; };;
- --help | --hel | -h )
- echo "$ac_cs_usage"; exit 0 ;;
- --debug | --d* | -d )
+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+ echo "$ac_cs_version"; exit ;;
+ --debug | --debu | --deb | --de | --d | -d )
debug=: ;;
--file | --fil | --fi | --f )
$ac_shift
CONFIG_FILES="$CONFIG_FILES $ac_optarg"
ac_need_defaults=false;;
- --header | --heade | --head | --hea )
- $ac_shift
- CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
- ac_need_defaults=false;;
+ --he | --h | --help | --hel | -h )
+ echo "$ac_cs_usage"; exit ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil | --si | --s)
ac_cs_silent=: ;;
# This is an error.
- -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2;}
+ -*) { echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2
{ (exit 1); exit 1; }; } ;;
- *) ac_config_targets="$ac_config_targets $1" ;;
+ *) ac_config_targets="$ac_config_targets $1"
+ ac_need_defaults=false ;;
esac
shift
@@ -2485,33 +2917,47 @@
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
if \$ac_cs_recheck; then
- echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
- exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
+ CONFIG_SHELL=$SHELL
+ export CONFIG_SHELL
+ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
fi
_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+ echo "$ac_log"
+} >&5
-
-
-
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
+
+# Handling of arguments.
for ac_config_target in $ac_config_targets
do
- case "$ac_config_target" in
- # Handling of arguments.
- "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
- "etc/Makefile" ) CONFIG_FILES="$CONFIG_FILES etc/Makefile" ;;
- "lisp/Makefile" ) CONFIG_FILES="$CONFIG_FILES lisp/Makefile" ;;
- "texi/Makefile" ) CONFIG_FILES="$CONFIG_FILES texi/Makefile" ;;
- "texi/gnusconfig.tex" ) CONFIG_FILES="$CONFIG_FILES texi/gnusconfig.tex" ;;
- "texi/ps/Makefile" ) CONFIG_FILES="$CONFIG_FILES texi/ps/Makefile" ;;
+ case $ac_config_target in
+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+ "etc/Makefile") CONFIG_FILES="$CONFIG_FILES etc/Makefile" ;;
+ "lisp/Makefile") CONFIG_FILES="$CONFIG_FILES lisp/Makefile" ;;
+ "texi/Makefile") CONFIG_FILES="$CONFIG_FILES texi/Makefile" ;;
+ "texi/gnusconfig.tex") CONFIG_FILES="$CONFIG_FILES texi/gnusconfig.tex" ;;
+ "texi/ps/Makefile") CONFIG_FILES="$CONFIG_FILES texi/ps/Makefile" ;;
+
*) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
{ (exit 1); exit 1; }; };;
esac
done
+
# If the user did not use the arguments to specify the items to instantiate,
# then the envvar interface is used. Set only those that are not.
# We use the long form for the default assignment because of an extremely
@@ -2521,340 +2967,418 @@
fi
# Have a temporary directory for convenience. Make it in the build tree
-# simply because there is no reason to put it here, and in addition,
+# simply because there is no reason against having it here, and in addition,
# creating and moving files from /tmp can sometimes cause problems.
-# Create a temporary directory, and hook for its removal unless debugging.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
$debug ||
{
- trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+ tmp=
+ trap 'exit_status=$?
+ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+' 0
trap '{ (exit 1); exit 1; }' 1 2 13 15
}
-
# Create a (secure) tmp directory for tmp files.
{
- tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
test -n "$tmp" && test -d "$tmp"
} ||
{
- tmp=./confstat$$-$RANDOM
- (umask 077 && mkdir $tmp)
+ tmp=./conf$$-$RANDOM
+ (umask 077 && mkdir "$tmp")
} ||
{
echo "$me: cannot create a temporary directory in ." >&2
{ (exit 1); exit 1; }
}
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-
#
-# CONFIG_FILES section.
+# Set up the sed scripts for CONFIG_FILES section.
#
# No need to generate the scripts if there are no CONFIG_FILES.
# This happens for instance when ./config.status config.h
-if test -n "\$CONFIG_FILES"; then
- # Protect against being on the right side of a sed subst in config.status.
- sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
- s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
-s,@SHELL@,$SHELL,;t t
-s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
-s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
-s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
-s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
-s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
-s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
-s,@exec_prefix@,$exec_prefix,;t t
-s,@prefix@,$prefix,;t t
-s,@program_transform_name@,$program_transform_name,;t t
-s,@bindir@,$bindir,;t t
-s,@sbindir@,$sbindir,;t t
-s,@libexecdir@,$libexecdir,;t t
-s,@datadir@,$datadir,;t t
-s,@sysconfdir@,$sysconfdir,;t t
-s,@sharedstatedir@,$sharedstatedir,;t t
-s,@localstatedir@,$localstatedir,;t t
-s,@libdir@,$libdir,;t t
-s,@includedir@,$includedir,;t t
-s,@oldincludedir@,$oldincludedir,;t t
-s,@infodir@,$infodir,;t t
-s,@mandir@,$mandir,;t t
-s,@build_alias@,$build_alias,;t t
-s,@host_alias@,$host_alias,;t t
-s,@target_alias@,$target_alias,;t t
-s,@DEFS@,$DEFS,;t t
-s,@ECHO_C@,$ECHO_C,;t t
-s,@ECHO_N@,$ECHO_N,;t t
-s,@ECHO_T@,$ECHO_T,;t t
-s,@LIBS@,$LIBS,;t t
-s,@SET_MAKE@,$SET_MAKE,;t t
-s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
-s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
-s,@INSTALL_DATA@,$INSTALL_DATA,;t t
-s,@MAKEINFO@,$MAKEINFO,;t t
-s,@EMACS@,$EMACS,;t t
-s,@XEMACS@,$XEMACS,;t t
-s,@EMACS_FLAVOR@,$EMACS_FLAVOR,;t t
-s,@lispdir@,$lispdir,;t t
-s,@etcdir@,$etcdir,;t t
-s,@info_dir@,$info_dir,;t t
-s,@HAVE_url@,$HAVE_url,;t t
-s,@URL@,$URL,;t t
-s,@HAVE_w3_forms@,$HAVE_w3_forms,;t t
-s,@W3@,$W3,;t t
-s,@FLAGS@,$FLAGS,;t t
-s,@LATEX@,$LATEX,;t t
-s,@WITH_FONTS_bembo@,$WITH_FONTS_bembo,;t t
-s,@WITHOUT_FONTS_bembo@,$WITHOUT_FONTS_bembo,;t t
-s,@WITH_FONTS_pfu@,$WITH_FONTS_pfu,;t t
-s,@WITHOUT_FONTS_pfu@,$WITHOUT_FONTS_pfu,;t t
-s,@WITH_FONTS_bcr@,$WITH_FONTS_bcr,;t t
-s,@WITHOUT_FONTS_bcr@,$WITHOUT_FONTS_bcr,;t t
-s,@USE_FONTS@,$USE_FONTS,;t t
-s,@LIBOBJS@,$LIBOBJS,;t t
-s,@LTLIBOBJS@,$LTLIBOBJS,;t t
-CEOF
-
-_ACEOF
-
- cat >>$CONFIG_STATUS <<\_ACEOF
- # Split the substitutions into bite-sized pieces for seds with
- # small command number limits, like on Digital OSF/1 and HP-UX.
- ac_max_sed_lines=48
- ac_sed_frag=1 # Number of current file.
- ac_beg=1 # First line for current file.
- ac_end=$ac_max_sed_lines # Line after last line for current file.
- ac_more_lines=:
- ac_sed_cmds=
- while $ac_more_lines; do
- if test $ac_beg -gt 1; then
- sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
- else
- sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
- fi
- if test ! -s $tmp/subs.frag; then
- ac_more_lines=false
- else
- # The purpose of the label and of the branching condition is to
- # speed up the sed processing (if there are no `@' at all, there
- # is no need to browse any of the substitutions).
- # These are the two extra sed commands mentioned above.
- (echo ':t
- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
- else
- ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
- fi
- ac_sed_frag=`expr $ac_sed_frag + 1`
- ac_beg=$ac_end
- ac_end=`expr $ac_end + $ac_max_sed_lines`
- fi
- done
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds=cat
+if test -n "$CONFIG_FILES"; then
+
+_ACEOF
+
+
+
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+ cat >conf$$subs.sed <<_ACEOF
+SHELL!$SHELL$ac_delim
+PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
+PACKAGE_NAME!$PACKAGE_NAME$ac_delim
+PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
+PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
+PACKAGE_STRING!$PACKAGE_STRING$ac_delim
+PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
+exec_prefix!$exec_prefix$ac_delim
+prefix!$prefix$ac_delim
+program_transform_name!$program_transform_name$ac_delim
+bindir!$bindir$ac_delim
+sbindir!$sbindir$ac_delim
+libexecdir!$libexecdir$ac_delim
+datarootdir!$datarootdir$ac_delim
+datadir!$datadir$ac_delim
+sysconfdir!$sysconfdir$ac_delim
+sharedstatedir!$sharedstatedir$ac_delim
+localstatedir!$localstatedir$ac_delim
+includedir!$includedir$ac_delim
+oldincludedir!$oldincludedir$ac_delim
+docdir!$docdir$ac_delim
+infodir!$infodir$ac_delim
+htmldir!$htmldir$ac_delim
+dvidir!$dvidir$ac_delim
+pdfdir!$pdfdir$ac_delim
+psdir!$psdir$ac_delim
+libdir!$libdir$ac_delim
+localedir!$localedir$ac_delim
+mandir!$mandir$ac_delim
+DEFS!$DEFS$ac_delim
+ECHO_C!$ECHO_C$ac_delim
+ECHO_N!$ECHO_N$ac_delim
+ECHO_T!$ECHO_T$ac_delim
+LIBS!$LIBS$ac_delim
+build_alias!$build_alias$ac_delim
+host_alias!$host_alias$ac_delim
+target_alias!$target_alias$ac_delim
+SET_MAKE!$SET_MAKE$ac_delim
+INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
+INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
+INSTALL_DATA!$INSTALL_DATA$ac_delim
+MAKEINFO!$MAKEINFO$ac_delim
+EMACS!$EMACS$ac_delim
+XEMACS!$XEMACS$ac_delim
+EMACS_FLAVOR!$EMACS_FLAVOR$ac_delim
+lispdir!$lispdir$ac_delim
+etcdir!$etcdir$ac_delim
+info_dir!$info_dir$ac_delim
+HAVE_url!$HAVE_url$ac_delim
+URL!$URL$ac_delim
+HAVE_w3_forms!$HAVE_w3_forms$ac_delim
+W3!$W3$ac_delim
+FLAGS!$FLAGS$ac_delim
+LATEX!$LATEX$ac_delim
+WITH_FONTS_bembo!$WITH_FONTS_bembo$ac_delim
+WITHOUT_FONTS_bembo!$WITHOUT_FONTS_bembo$ac_delim
+WITH_FONTS_pfu!$WITH_FONTS_pfu$ac_delim
+WITHOUT_FONTS_pfu!$WITHOUT_FONTS_pfu$ac_delim
+WITH_FONTS_bcr!$WITH_FONTS_bcr$ac_delim
+WITHOUT_FONTS_bcr!$WITHOUT_FONTS_bcr$ac_delim
+USE_FONTS!$USE_FONTS$ac_delim
+LIBOBJS!$LIBOBJS$ac_delim
+LTLIBOBJS!$LTLIBOBJS$ac_delim
+_ACEOF
+
+ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 63; then
+ break
+ elif $ac_last_try; then
+ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+ { (exit 1); exit 1; }; }
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
fi
-fi # test -n "$CONFIG_FILES"
+done
+
+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
+if test -n "$ac_eof"; then
+ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
+ ac_eof=`expr $ac_eof + 1`
+fi
+cat >>$CONFIG_STATUS <<_ACEOF
+cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
+_ACEOF
+sed '
+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
+s/^/s,@/; s/!/@,|#_!!_#|/
+:n
+t n
+s/'"$ac_delim"'$/,g/; t
+s/$/\\/; p
+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
+' >>$CONFIG_STATUS <conf$$subs.sed
+rm -f conf$$subs.sed
+cat >>$CONFIG_STATUS <<_ACEOF
+:end
+s/|#_!!_#|//g
+CEOF$ac_eof
_ACEOF
+
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
+s/:*\$(srcdir):*/:/
+s/:*\${srcdir}:*/:/
+s/:*@srcdir@:*/:/
+s/^\([^=]*=[ ]*\):*/\1/
+s/:*$//
+s/^[^=]*=[ ]*$//
+}'
+fi
+
cat >>$CONFIG_STATUS <<\_ACEOF
-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
- case $ac_file in
- - | *:- | *:-:* ) # input from stdin
- cat >$tmp/stdin
- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- * ) ac_file_in=$ac_file.in ;;
+fi # test -n "$CONFIG_FILES"
+
+
+for ac_tag in :F $CONFIG_FILES
+do
+ case $ac_tag in
+ :[FHLC]) ac_mode=$ac_tag; continue;;
esac
+ case $ac_mode$ac_tag in
+ :[FHL]*:*);;
+ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
+echo "$as_me: error: Invalid tag $ac_tag." >&2;}
+ { (exit 1); exit 1; }; };;
+ :[FH]-) ac_tag=-:-;;
+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+ esac
+ ac_save_IFS=$IFS
+ IFS=:
+ set x $ac_tag
+ IFS=$ac_save_IFS
+ shift
+ ac_file=$1
+ shift
- # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
- ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+ case $ac_mode in
+ :L) ac_source=$1;;
+ :[FH])
+ ac_file_inputs=
+ for ac_f
+ do
+ case $ac_f in
+ -) ac_f="$tmp/stdin";;
+ *) # Look for the file first in the build tree, then in the source tree
+ # (if the path is not absolute). The absolute path cannot be DOS-style,
+ # because $ac_f cannot contain `:'.
+ test -f "$ac_f" ||
+ case $ac_f in
+ [\\/$]*) false;;
+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+ esac ||
+ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
+echo "$as_me: error: cannot find input file: $ac_f" >&2;}
+ { (exit 1); exit 1; }; };;
+ esac
+ ac_file_inputs="$ac_file_inputs $ac_f"
+ done
+
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ configure_input="Generated from "`IFS=:
+ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
+ if test x"$ac_file" != x-; then
+ configure_input="$ac_file. $configure_input"
+ { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+ fi
+
+ case $ac_tag in
+ *:-:* | *:-) cat >"$tmp/stdin";;
+ esac
+ ;;
+ esac
+
+ ac_dir=`$as_dirname -- "$ac_file" ||
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$ac_file" : 'X\(//\)[^/]' \| \
X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- { if $as_mkdir_p; then
- mkdir -p "$ac_dir"
- else
- as_dir="$ac_dir"
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ { as_dir="$ac_dir"
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
as_dirs=
- while test ! -d "$as_dir"; do
- as_dirs="$as_dir $as_dirs"
- as_dir=`(dirname "$as_dir") 2>/dev/null ||
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
done
- test ! -n "$as_dirs" || mkdir $as_dirs
- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+echo "$as_me: error: cannot create directory $as_dir" >&2;}
{ (exit 1); exit 1; }; }; }
-
ac_builddir=.
-if test "$ac_dir" != .; then
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A "../" for each directory in $ac_dir_suffix.
- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
- ac_dir_suffix= ac_top_builddir=
-fi
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
case $srcdir in
- .) # No --srcdir option. We are building in place.
+ .) # We are building in place.
ac_srcdir=.
- if test -z "$ac_top_builddir"; then
- ac_top_srcdir=.
- else
- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
- fi ;;
- [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir ;;
- *) # Relative path.
- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_builddir$srcdir ;;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
- case "$ac_dir" in
- .) ac_abs_builddir=`pwd`;;
- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
- *) ac_abs_builddir=`pwd`/"$ac_dir";;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
- case ${ac_top_builddir}. in
- .) ac_abs_top_builddir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
- case $ac_srcdir in
- .) ac_abs_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
- case $ac_top_srcdir in
- .) ac_abs_top_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
- esac;;
-esac
+ case $ac_mode in
+ :F)
+ #
+ # CONFIG_FILE
+ #
case $INSTALL in
[\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
- *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
esac
+_ACEOF
- if test x"$ac_file" != x-; then
- { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
- rm -f "$ac_file"
- fi
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
- if test x"$ac_file" = x-; then
- configure_input=
- else
- configure_input="$ac_file. "
- fi
- configure_input=$configure_input"Generated from `echo $ac_file_in |
- sed 's,.*/,,'` by configure."
-
- # First look for the input files in the build tree, otherwise in the
- # src tree.
- ac_file_inputs=`IFS=:
- for f in $ac_file_in; do
- case $f in
- -) echo $tmp/stdin ;;
- [\\/$]*)
- # Absolute (can't be DOS-style, as IFS=:)
- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- echo "$f";;
- *) # Relative
- if test -f "$f"; then
- # Build tree
- echo "$f"
- elif test -f "$srcdir/$f"; then
- # Source tree
- echo "$srcdir/$f"
- else
- # /dev/null tree
- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- fi;;
- esac
- done` || { (exit 1); exit 1; }
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+
+case `sed -n '/datarootdir/ {
+ p
+ q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p
+' $ac_file_inputs` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
+ ac_datarootdir_hack='
+ s&@datadir@&$datadir&g
+ s&@docdir@&$docdir&g
+ s&@infodir@&$infodir&g
+ s&@localedir@&$localedir&g
+ s&@mandir@&$mandir&g
+ s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF
sed "$ac_vpsub
$extrasub
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
:t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s,@configure_input@,$configure_input,;t t
-s,@srcdir@,$ac_srcdir,;t t
-s,@abs_srcdir@,$ac_abs_srcdir,;t t
-s,@top_srcdir@,$ac_top_srcdir,;t t
-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
-s,@builddir@,$ac_builddir,;t t
-s,@abs_builddir@,$ac_abs_builddir,;t t
-s,@top_builddir@,$ac_top_builddir,;t t
-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
-s,@INSTALL@,$ac_INSTALL,;t t
-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
- rm -f $tmp/stdin
- if test x"$ac_file" != x-; then
- mv $tmp/out $ac_file
- else
- cat $tmp/out
- rm -f $tmp/out
- fi
+s&@configure_input@&$configure_input&;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+$ac_datarootdir_hack
+" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined." >&5
+echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined." >&2;}
-done
-_ACEOF
+ rm -f "$tmp/stdin"
+ case $ac_file in
+ -) cat "$tmp/out"; rm -f "$tmp/out";;
+ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
+ esac
+ ;;
+
+
+
+ esac
+
+done # for ac_tag
-cat >>$CONFIG_STATUS <<\_ACEOF
{ (exit 0); exit 0; }
_ACEOF