Re: Trouble installing on cygwin Xemacs

Sorry - my email editor insisted on messing with that init.el example - 
this is the correct listing, assuming you have put  jde-2.3.5.1 and 
cedet-1.0pre4 into c:/java/emacs -

- - - - - - -  init.el  - - - - - -
    (add-to-list 'load-path "c:/java/emacs/jde-2.3.5.1/lisp")
    (add-to-list 'load-path "c:/java/emacs/cedet-1.0pre4/semantic")
    (add-to-list 'load-path "c:/java/emacs/cedet-1.0pre4/speedbar")
    (add-to-list 'load-path "c:/java/emacs/cedet-1.0pre4/eieio")
    (load-file "c:/java/emacs/cedet-1.0pre4/common/cedet.el")

    (defun my-jde-mode-hook ()
      (c-set-style "bsd")
      (setq c-basic-offset 4))
    (add-hook 'jde-mode-hook 'my-jde-mode-hook)
    - - - - - - - - - - - - - - - - -

On 8/7/2007 10:53 PM, Paul Copeland wrote:
> Thanks Mike your suggestion sounds like another solution.
>
> As I said, the final .xemacs/init.el fragment given below does load 
> JDEE without errors for Xemacs 21.4.20. Even the JDE and JDB docs on 
> the menus work (they didn't with the JDEE that comes with cygwin). 
> This combination at least is apparently compatible.
>
> On 8/7/2007 7:05 PM, Mike Ash wrote:
>> I can't remember where but in one of the jde files it has a check for 
>> the version, I just changed mine and it worked fine.  Anyway search 
>> your files for that version string and replace that string with what 
>> the jde is looking for.
>>
>> On 8/7/07, *Paul Copeland* <[email protected] 
>> <mailto:[email protected]>> wrote:
>>
>>     - SOLUTION -
>>
>>     Sorry to reply AGAIN, but I FINALLY did get JDEE working correctly
>>     with
>>     Xemacs 21.4.20 using this init.el -
>>
>>     - - - - - - -  init.el  - - - - - -
>>     (add-to-list 'load-path "c:/java/emacs/jde-2.3.5.1/lisp")
>>     (add-to-list 'load-path "c:/java/emacs/cedet-1.0pre4/semantic")
>>     (add-to-list 'load-path "c:/java/emacs/cedet-1.0pre4/speedbar")
>>     (add-to-list 'load-path "c:/java/emacs/cedet- 1.0pre4/eieio")
>>     (load-file "c:/java/emacs/cedet-1.0pre4/common/cedet.el")
>>
>>     (defun my-jde-mode-hook ()
>>       (c-set-style "bsd")
>>       (setq c-basic-offset 4))
>>     (add-hook 'jde-mode-hook 'my-jde-mode-hook)
>>     - - - - - - - - - - - - - - - - -
>>
>>     Now I just have to figure out how to actually use the JDE features!
>>
>>
>>     On 8/7/2007 2:25 PM, Paul Copeland wrote:
>>     > I tried loading some of the packages from
>>     > http://cedet.sourceforge.net/.  Now I get this error when I 
>> open the
>>     > first java file -
>>     >
>>     > ERROR -- "JDEE requires a version of CEDET between 1.0beta and 1.0
>>     > (found none)"
>>     >
>>     > My init.el looks like this now. I used cedet-1.0pre4 because I
>>     see an
>>     > early mesage on this list that says pre3 worked so I figureed pre4
>>     > would too.
>>     > - - - - - - - - - - - - - - - - -
>>     > (add-to-list 'load-path "c:/java/emacs/jde-2.3.5.1/lisp
>>     <http://2.3.5.1/lisp>")
>>     > (add-to-list 'load-path "c:/java/emacs/cedet-1.0pre4/semantic")
>>     > (add-to-list 'load-path "c:/java/emacs/cedet- 1.0pre4/speedbar")
>>     > (add-to-list 'load-path "c:/java/emacs/cedet-1.0pre4/eieio")
>>     > (add-to-list 'load-path "c:/java/emacs/cedet-1.0pre4/common")
>>     > (add-to-list 'load-path "c:/java/emacs/cedet- 1.0pre4/ede")
>>     >
>>     > (defun my-jde-mode-hook ()
>>     >  (c-set-style "bsd")
>>     >  (setq c-basic-offset 4))
>>     > (add-hook 'jde-mode-hook 'my-jde-mode-hook)
>>     > - - - - - - - - - - - - - - - -
>>     >
>>     >
>>     > On 8/6/2007 10:19 PM, Paul Copeland wrote:
>>     >> Turns out there was a missing dash in the file name :-) which
>>     should
>>     >> be like this:
>>     >>
>>     >> (add-to-list 'load-path "c:/java/emacs/jde- 2.3.5.1/lisp
>>     <http://2.3.5.1/lisp>")
>>     >>
>>     >> But now I get this error:
>>     >>
>>     >> (1) (initialization/error) An error has occurred while loading
>>     >> /cygdrive/c/Users/jot/.xemacs/init.el:
>>     >>
>>     >> Cannot open load file: semantic-idle
>>     >>
>>     >> On 8/6/2007 1:38 PM, Paul Copeland wrote:
>>     >>> I've got Xemacs 21.4.20 running on latest cygwin on Windows 
>> Vista.
>>     >>>
>>     >>> The JDE from cygwin is 1.48 according to Tools-Packages-List.
>>     >>>
>>     >>> Trying to upgrade to jde-2.3.5.1 downloaded from
>>     >>> http://jdee.sunsite.dk/ <http://jdee.sunsite.dk/>
>>     >>>
>>     >>> The instructions at http://jdee.sunsite.dk/install.html say to
>>     go to
>>     >>> sourceforge for cedet but it looks like the versions of
>>     semantic and
>>     >>> elib are more up to date on cygwin.  Also the instructions talk
>>     >>> about .emacs file but what I have is an init.el file in the
>>     .xemacs
>>     >>> directory with these contents -
>>     >>>
>>     >>> - - - - - - - init.el  - - - - - -
>>     >>> (add-to-list 'load-path "c:/java/emacs/jde2.3.5.1/lisp")
>>     >>> (require 'jde)
>>     >>>
>>     >>> (defun my-jde-mode-hook ()
>>     >>>  (c-set-style "bsd")
>>     >>>  (setq c-basic-offset 4))
>>     >>> (add-hook 'jde-mode-hook 'my-jde-mode-hook)
>>     >>> - - - - - - - - - - - - - - - - -
>>     >>>
>>     >>> However Tools-Packages-List menu still shows jde 1.48 so I
>>     think the
>>     >>> install is not successful.
>>     >>>
>>     >>> Where am I going wrong?
>>     >>>
>>     >>> TIA - Paul
>>     >>>
>>     >>>
>>     >>>
>>     >>>
>>     >>>
>>     >>
>>     >>
>>     >>
>>     >
>>     >
>>     >
>>
>>
>>
>>
>> -- 
>> Mike Ash 
>