RE: I-D ACTION:draft-ietf-disman-remops-mib-v2-09.txt

"Kumar, Rajesh" <[email protected]> Thu, 23 Feb 2006 16:10:24 -0800
Newsgroups gmane.ietf.disman
Message-ID <6CF1217966D48442AD2A788E8DE45E648EB76C@vtg-um-e2k7.sj21ad.cisco.com>
Kenneth and Juergen,

Congratulatons on your internet draft on reporting ping/traceroute
results being in last call.

Basically, it is a good draft. I  do have one concern. When you do a UDP
or ICMP traceroute from any node, yoy typically get three delay
approximations for each stimulus-response with increasing TTLs. Granted
that this is an approximation, I did not see a mechanism for reporting
this inforation in your internet draft. Maybe I missed it and it is
there?

Best regards,

Rajesh Kumar


> -----Original Message-----
> From: [email protected] [mailto:[email protected]]
> Sent: Wednesday, February 22, 2006 3:50 PM
> To: [email protected]
> Cc: [email protected]
> Subject: I-D ACTION:draft-ietf-disman-remops-mib-v2-09.txt 
> 
> A New Internet-Draft is available from the on-line 
> Internet-Drafts directories.
> This draft is a work item of the Distributed Management 
> Working Group of the IETF.
> 
> 	Title		: Definitions of Managed Objects for Remote
> Ping, Traceroute, and Lookup Operations
> 	Author(s)	: J. Quittek, K. White
> 	Filename	: draft-ietf-disman-remops-mib-v2-09.txt
> 	Pages		: 97
> 	Date		: 2006-2-22
> 	
> This memo defines Management Information Bases (MIBs) for 
> performing ping, traceroute and lookup operations at a host.  
> When managing a network it is useful to be able to initiate 
> and retrieve the results of ping or traceroute operations 
> when performed at a remote host.  A Lookup capability is 
> defined in order to enable resolution of either an IP address 
> to an DNS name or a DNS name to an IP address at a remote host.
> 
> Currently, there are several enterprise-specific MIBs for 
> performing remote ping or traceroute operations.  The purpose 
> of this memo is to define a standards-based solution to 
> enable interoperability.
> 
> A URL for this Internet-Draft is:
> http://www.ietf.org/internet-drafts/draft-ietf-disman-remops-m
> ib-v2-09.t
> xt
> 
> To remove yourself from the I-D Announcement list, send a 
> message to [email protected] with the word 
> unsubscribe in the body of the message.  
> You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce
> to change your subscription settings.
> 
> 
> Internet-Drafts are also available by anonymous FTP. Login 
> with the username "anonymous" and a password of your e-mail 
> address. After logging in, type "cd internet-drafts" and then
> 	"get draft-ietf-disman-remops-mib-v2-09.txt".
> 
> A list of Internet-Drafts directories can be found in 
> http://www.ietf.org/shadow.html or 
> ftp://ftp.ietf.org/ietf/1shadow-sites.txt
> 
> 
> Internet-Drafts can also be obtained by e-mail.
> 
> Send a message to:
> 	[email protected].
> In the body type:
> 	"FILE /internet-drafts/draft-ietf-disman-remops-mib-v2-09.txt".
> 	
> NOTE:	The mail server at ietf.org can return the document in
> 	MIME-encoded form by using the "mpack" utility.  To use this
> 	feature, insert the command "ENCODING mime" before the "FILE"
> 	command.  To decode the response(s), you will need "munpack" or
> 	a MIME-compliant mail reader.  Different MIME-compliant 
> mail readers
> 	exhibit different behavior, especially when dealing with
> 	"multipart" MIME messages (i.e. documents which have been split
> 	up into multiple messages), so check your local documentation on
> 	how to manipulate these messages.
> 		
> 		
> Below is the data which will enable a MIME compliant mail 
> reader implementation to automatically retrieve the ASCII 
> version of the Internet-Draft.
>