Re: Is the SR Policy SAFI described in draft-ietf-idr-segment-routing-te-policy-07 under the MP-NLRI (code =14) or under the Tunnel Path attribute (code = 23)?

> On Oct 23, 2019, at 1:23 AM, Linda Dunbar <[email protected]> wrote:
> 
> IDR experts and the Authors of draft-ietf-idr-segment-routing-te-policy-07:
>  
> The section 2.1 of draft-ietf-idr-segment-routing-te-policy-07 describes a new SR Policy SAFI under NLRI of BGP UPDATE to advertise SR policies.
>  
> Does it mean that SR Policy SAFI is under the MP-NLRI Path Attribute (Code = 14)?


yes, the nlri with the new safi identifies the policy:
   +------------------+
   |  NLRI Length     | 1 octet
   +------------------+
   |  Distinguisher   | 4 octets
   +------------------+
   |  Policy Color    | 4 octets
   +------------------+
   |  Endpoint        | 4 or 16 octets 
   +------------------+


> The Section 2.2 indicates that SR Policy is encoded in the Tunnel Encapsulation Path Attribute defined in the draft-ietf-idr-tunnel-encaps-12.
>  
> Does it mean the SR policy is also under the Tunnel Path Attribute with Code =23?


the content (i.e., the details) of the sr policy is encoded in the tunnel path attribute.


> Can you please explain is it MP-NLRI Path Attribute or Tunnel Encap Path Attribute that SR policy are encoded?


there are separate items: policy identifier and policy content.

the policy identifier (distinguisher, color, endpoint) goes into the nlri and the policy content (e.g., the segment list) go into the tunnel path attribute.

s.


>  
> Thank you very much. 
>  
> Linda Dunbar

_______________________________________________
Idr mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/idr