HDLC Timers (2)
Javi <[email protected]>
| Newsgroups | gmane.ietf.l2tpext |
|---|---|
| Message-ID | <[email protected]> |
If so, you may need too many resources over the IP link between the LCCEs, it wouldn't be efficient. If that is the only way to manage L2 timers with pseudo-wires and L2TPv3, I have no clear it is a good idea to transport L2 frames over IP networks. Javi Ignacio Goyret escribió: > At 20:51 6/27/2006 +0200, Javi wrote: > >> I have a question related to transport of HDLC frames over L2TPv3 (RFC 4349): >> >> HDLC identifies a number of timers that may be used by an HDLC link (which >> is operating in the reliable ABM Mode) to provide reliable data transmission, >> such as the Acknowledgement Timer (T1). >> >> How are these timers managed in transport of HDLC frames over L2TPv3 and PWEs?. >> The transport over IP may result in an expiration of the timers. >> >> Javi >> > > I would expect the timers to work the same way as they do over a regular > point to point link. > > Depending on the quality of the link between the LCCEs, the expiration times > may need tweaking though. > > -Ignacio > > _______________________________________________ > L2tpext mailing list > [email protected] > https://www1.ietf.org/mailman/listinfo/l2tpext > >