RE: RAQMON Trap PDU size and report transmission time

"Golovinsky, Eugene" <[email protected]>
Newsgroups gmane.ietf.rmonmib
Message-ID <E9DE7963E5EA6546B42A979EC28B4D010498C749@hou-ex-02.adprod.bmc.com>
Hi.

We counted this at some point. The maximum length of PDU carrying basic
report was not exceeding 484 bytes. I do not remember exact number right
now. Besides we changed report structure since we have done this
calculation, but the ball park remains the same. May be Anwar can find our
calculation notes (it was on his scratch pad).

Cheers.
--Gene

 

 


-----Original Message-----
From: Andy Bierman [mailto:[email protected]] 
Sent: Monday, January 17, 2005 1:42 PM
To: [email protected]
Subject: [RMONMIB] RAQMON Trap PDU size and report transmission time

Hi,

Does anyone know how many RAQMON-RDS-MIB varbinds can fit in 
an unfragmented SNMP Trap PDU?  (IPv4 as well as IPv6).

It seems to me that all of the Basic report parameters should be 
reported at least once per session, otherwise they shouldn't be 
in the common parameter list.  If the Basic report needs to be 
fragmented into multiple Trap PDUs, then RDS complexity is 
increased, and the likelihood goes up that a maximum transmission 
rate of 1 Trap PDU every 2 minutes becomes a bottleneck on the RDS.

Andy

_______________________________________________
RMONMIB mailing list
[email protected]
https://www1.ietf.org/mailman/listinfo/rmonmib
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.