RE: LinkSet-RouteSet in M3UA

Ambika,

If you have a single ASP and a single SGP, why would you want to have
multiple associations?

Regards,
Lincoln 

________________________________

From: Ambika Tripathy [mailto:[email protected]] 
Sent: Thursday, January 04, 2007 9:02 AM
To: Haresign Lincoln
Cc: Kuldeep Janjua; [email protected]
Subject: Re: [Sigtran] LinkSet-RouteSet in M3UA


Then it is the concept of load sharing/broadcasting when one ASP
connects to multiple SGP.
 
But is there any way to send data of one ASP through multiuple
Association to the peer SGP in oneASP-one SGP coonection then we can
term it association sets. 
 
The above way can be a better approach..
 
Br,
Ambika

 
On 1/4/07, Haresign Lincoln <[email protected]> wrote: 

	THere is a one to one mapping when the SGP is determing which
ASP to send to.
	 
	When the ASP is routing the message to the SS7 network, it can
route through multiple associtations and possibly multiple SGs
(association sets).
	 
	Regards,
	Lincoln

________________________________

	From: Ambika Tripathy [mailto:[email protected]] 
	Sent: Thursday, January 04, 2007 8:51 AM
	To: Haresign Lincoln
	Cc: Kuldeep Janjua; [email protected] 
	
	Subject: Re: [Sigtran] LinkSet-RouteSet in M3UA
	
	
	 
		There is a one to one mapping of ASP to Association and
the traffic modes of M3UA come into picture when below scenario comes.
	 
	Then what is the utility of this?
	 
	Br,
	Ambika
	
	 
	On 1/4/07, Haresign Lincoln <[email protected] >
wrote: 

		I believe there are similar concepts in M3UA when viewed
from the ASP towards the SS7 network.
		 
		For example, you can have multiple associations from an
ASP connecting to an SG if the SG consists of multiple SGPs.  Therefore,
this set of associations could be considered an "association set". 
		 
		Also, an ASP can connect to multiple SGs.  In order to
route a message to a PC in the SS7 network, the ASP would need to choose
which set of routes (which SG to route through) in order to properly
route the message.  Hence the "route set". 
		 
		Regards,
		Lincoln

________________________________

		From: Kuldeep Janjua [mailto:[email protected]] 
		Sent: Thursday, January 04, 2007 5:43 AM
		To: Ambika Tripathy; [email protected]
		Subject: Re: [Sigtran] LinkSet-RouteSet in M3UA 
		
		 
				Hi Ambika,
		
		Link-Set and Rout-Set are the terms associated with
MTP3.
		
		In M3UA there is only Routing-Key which is generally
used for traffic range between MTP3 and its user lying in the IP domain.
		
		Regards,
		Kuldeep
		
		
		
		On 1/4/07, Ambika Tripathy <[email protected]
<mailto:[email protected]> > wrote: 


			Hi All,
			I have a doubt regarding the LinkSet and
RouteSet concept in M3UA. Can any body help me for the same by providing
more information in it.
			 
			As per my knowledge there is no concept of
LinkSet and RouteSet in M3UA. The LinkSet and Route set comes in MTP2
and MTP3 links.
			How can one relate LinkSet and RouteSet in M3UA?
			 
			-- 
			Br,
			Ambika Prasad Tripathy
			Nethawk Networks
			Cell: +91-94375 47730 

			_______________________________________________
			Sigtran mailing list
			[email protected]
			https://www1.ietf.org/mailman/listinfo/sigtran
			
			
			


		


	-- 
	Br,
	Ambika Prasad Tripathy
	Nethawk Networks
	Cell: +91-94375 47730 




-- 
Br,
Ambika Prasad Tripathy
Nethawk Networks
Cell: +91-94375 47730