RE: LinkSet-RouteSet in M3UA

I think the concept of "association set" and "route set" only exist from
the ASP looking towards the SS7 network through the SG and not from the
SG towards the AS.

A single ASP may have multiple routes to get to a particular DPC.  This
may be because there are multiple SGPs within the adjacent SG (therefore
multiple associations to choose from), or this may be because there are
multiple SGs connected to the ASP.  Or both conditions may exist.

Regards,
Lincoln
 

________________________________

From: Ashish Soregaonkar [mailto:[email protected]] 
Sent: Thursday, January 04, 2007 9:04 AM
To: sigtran
Subject: Re: [Sigtran] LinkSet-RouteSet in M3UA


I see the below relations.

1. A route-set to a set of ASPs in an AS. With each ASP connecting to
the same SG(with or without multiple SGPs) we have multiple routes to
the same peer.

2. SCTP associations with multiple streams relating to a link-set. All
links have the same adjacent node. 


-Ashish



On 1/4/07, Ambika Tripathy <[email protected]> wrote: 

	There is a one to one mapping of ASP to Association and the
traffic modes of M3UA come into picture when below scenario comes.
	 
	Then what is the utility of this?
	 
	Br,
		Ambika
	
	 
			On 1/4/07, Haresign Lincoln
<[email protected] > wrote: 

		I believe there are similar concepts in M3UA when viewed
from the ASP towards the SS7 network.
		 
		For example, you can have multiple associations from an
ASP connecting to an SG if the SG consists of multiple SGPs.  Therefore,
this set of associations could be considered an "association set". 
		 
		Also, an ASP can connect to multiple SGs.  In order to
route a message to a PC in the SS7 network, the ASP would need to choose
which set of routes (which SG to route through) in order to properly
route the message.  Hence the "route set". 
		 
		Regards,
		Lincoln

________________________________

		From: Kuldeep Janjua [mailto:[email protected]] 
		Sent: Thursday, January 04, 2007 5:43 AM
		To: Ambika Tripathy; [email protected]
		Subject: Re: [Sigtran] LinkSet-RouteSet in M3UA 
		
		 
				Hi Ambika,
		
		Link-Set and Rout-Set are the terms associated with
MTP3.
		
		In M3UA there is only Routing-Key which is generally
used for traffic range between MTP3 and its user lying in the IP domain.
		
		Regards,
		Kuldeep
		
		
		
		On 1/4/07, Ambika Tripathy <[email protected]
<mailto:[email protected]> > wrote: 


			Hi All,
			I have a doubt regarding the LinkSet and
RouteSet concept in M3UA. Can any body help me for the same by providing
more information in it.
			 
			As per my knowledge there is no concept of
LinkSet and RouteSet in M3UA. The LinkSet and Route set comes in MTP2
and MTP3 links.
			How can one relate LinkSet and RouteSet in M3UA?
			 
			-- 
			Br,
			Ambika Prasad Tripathy
			Nethawk Networks
			Cell: +91-94375 47730 

			_______________________________________________
			Sigtran mailing list
			[email protected]
			https://www1.ietf.org/mailman/listinfo/sigtran
			
			
			


		


	-- 
	Br,
	Ambika Prasad Tripathy
	Nethawk Networks
	Cell: +91-94375 47730 

	_______________________________________________
	Sigtran mailing list
	[email protected]
	https://www1.ietf.org/mailman/listinfo/sigtran