Re: Dual registration without Outbound
[email protected] (Juha Heinanen)
| Newsgroups | gmane.ietf.sip |
|---|---|
| Message-ID | <[email protected]> |
Christer Holmberg writes: > So, you want to register both contacts to both registars, right? > > Example: > > UA_Contact_wlan ----- OB_1 ----- REG_1 > UA_Contact_wlan ----- OB_1 ----- REG_2 > UA_Contact_3g ----- OB_2 ----- REG_1 > UA_Contact_3g ----- OB_2 ----- REG_2 no, like this: > UA_Contact_wlan ----- OB_1 ----- REG_1 > UA_Contact_wlan ----- OB_2 ----- REG_2 > UA_Contact_3g ----- OB_1 ----- REG_1 > UA_Contact_3g ----- OB_2 ----- REG_2 if outbound does not mandate that UA must register each contact with both ob proxies, my pleasant surprise was a too early one and ob draft falls back to the useless bin. -- juha _______________________________________________ Sip mailing list https://www.ietf.org/mailman/listinfo/sip This list is for NEW development of the core SIP Protocol Use [email protected] for questions on current sip Use [email protected] for new developments on the application of sip