[ACPI-sppt] Sharp AV18 hangs on boot w/ acpi patch

Hi folks,

	Here's the poop:

Computer: Sharp AV18, Athlon xp-m 1800+, probably some VIA chipset (KN266?)
Kernel: vanilla 2.4.21 from kernel.org, patched with acpi-20030619-2.4.21.diff
Kernel config: make xconfig; turn off apm; turn on:
	acpi support,
	AC adapter,
	Battery,
	Button,
	Fan,
	Processor,
	Thermal zone,
	...and debug statements.

And here's what happens:

	On reboot, the machine hangs, and the CPU fan stops.  Without
acpi debugging turned on, the last thing that happens is:

	PCI: PCI BIOS revision 2.10 entry at 0xfd93e, last bus=1
	PCI: Using configuration type 1

When I turn on acpi debugging, I see that the last thing that happens is:

	Executing all Device _STA and_INI methods:

followed by a row of dots.

	Any idea what's going on here?

						Thanks in advance,
						Bryan

-- 
===============================================================================
Bryan Wright                |"If you take cranberries and stew them like 
Physics Department          | applesauce, they taste much more like prunes 
University of Virginia      | than rhubarb does."  --  Groucho 
Charlottesville, VA  22901  |			
(434) 924-7218              |         [email protected]
===============================================================================




-------------------------------------------------------
This SF.Net email sponsored by: Parasoft
Error proof Web apps, automate testing & more.
Download & eval WebKing and get a free book.
www.parasoft.com/bulletproofapps1