Re: [ACPI-sppt] IBM Thinkpad problem please give INFO
Bernd Zeimetz <[email protected]>
| Newsgroups | gmane.linux.acpi.support |
|---|---|
| Message-ID | <Pine.SOL.4.51.0308261528380.19946@ultra10.rbg.informatik.tu-darmstadt.de> |
Hi,
> I have a ThinkPad R32. Only the most recent BIOS' and kernel patches work
> properly. I have ACPI subsystem 20030522 and a BIOS from April.
R40, most recent BIOS and kernel patch:
0 think:/tmp# grep -i acpi dmesg
Linux version 2.4.22-rc3-ac-rc2-acpi (root@think) (gcc version 3.2.3 (Debian)) #1 Sat Aug 23 23:51:10 CEST 2003
BIOS-e820: 000000002ff60000 - 000000002ff78000 (ACPI data)
BIOS-e820: 000000002ff78000 - 000000002ff7a000 (ACPI NVS)
ACPI: have wakeup address 0xc0001000
ACPI: RSDP (v002 IBM ) @ 0x000f6d40
ACPI: XSDT (v001 IBM TP-1P 0x00001130 LTP 0x00000000) @ 0x2ff6e4e6
ACPI: FADT (v003 IBM TP-1P 0x00001130 IBM 0x00000001) @ 0x2ff6e600
ACPI: SSDT (v001 IBM TP-1P 0x00001130 MSFT 0x0100000e) @ 0x2ff6e7b4
ACPI: ECDT (v001 IBM TP-1P 0x00001130 IBM 0x00000001) @ 0x2ff77ea3
ACPI: TCPA (v001 IBM TP-1P 0x00001130 PTL 0x00000001) @ 0x2ff77ef5
ACPI: BOOT (v001 IBM TP-1P 0x00001130 LTP 0x00000001) @ 0x2ff77fd8
ACPI: DSDT (v001 IBM TP-1P 0x00001130 MSFT 0x0100000e) @ 0x00000000
ACPI: Subsystem revision 20030813
ACPI: Found ECDT
ACPI-0165: *** Warning: The ACPI AML in your computer contains errors, please nag the manufacturer to correct it.
ACPI-0168: *** Warning: Allowing relaxed access to fields; turn on CONFIG_ACPI_DEBUG for details.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S3 S4 S5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 9 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *6 7 9 10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11, disabled)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11, disabled)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 9 10 11)
ACPI: PCI Root Bridge [PCI0] (00:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC] (gpe 28)
ACPI: Power Resource [PUBS] (on)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
ACPI-0345: *** Error: Handler for [EmbeddedControl] returned AE_TIME
ACPI-1121: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.AC__._PSR] (Node eff50e40), AE_TIME
ACPI-0345: *** Error: Handler for [EmbeddedControl] returned AE_TIME
ACPI-1121: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node eff50940), AE_TIME
ACPI-0345: *** Error: Handler for [EmbeddedControl] returned AE_TIME
ACPI-1121: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node eff50c40), AE_TIME
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI-0345: *** Error: Handler for [EmbeddedControl] returned AE_TIME
ACPI-1121: *** Error: Method execution failed [\_PR_.CPU_._PPC] (Node eff5e180), AE_TIME
ACPI: Processor [CPU] (supports C1 C2 C3, 6 performance states, 8 throttling states)
ACPI-0345: *** Error: Handler for [EmbeddedControl] returned AE_TIME
ACPI-1121: *** Error: Method execution failed [\_TZ_.THM0._TMP] (Node eff44980), AE_TIME
and all the Fn-Keys don't work with acpi enabled.
Kernels compiled with debug-statements in acpi have an oops while loading acpi.
0 think:/tmp# acpidmp DSDT > DSDT
0 think:/tmp# iasl -dc DSDT
Intel ACPI Component Architecture
ASL Optimizing Compiler / AML Disassembler version 20030619 [Jul 16 2003]
Copyright (C) 2000 - 2003 Intel Corporation
Supports ACPI Specification Revision 2.0b
Loading Acpi table from file DSDT
Acpi table [DSDT] successfully installed and loaded
Pass 1 parse of [DSDT]
Pass 2 parse of [DSDT]
Parsing Deferred Opcodes (Methods/Buffers/Packages/Regions)
.......................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
Parsing completed
Disassembly completed, written to "DSDT.dsl"
Compiling "DSDT.dsl"
DSDT.dsl 609: If (\_OSI ("Windows 2001"))
Error 1029 - ^ Called method returns no value
DSDT.dsl 6330: Field (U7CS, DWordAcc, NoLock, Preserve)
Error 1047 - ^ Access width is greater than region size
DSDT.dsl 6332: PWKI, 1,
Error 1051 - ^ Access width of Field Unit extends beyond region limit
DSDT.dsl 6333: PWUC, 6,
Error 1051 - ^ Access width of Field Unit extends beyond region limit
ASL Input: DSDT.dsl - 9021 lines, 297817 bytes, 4042 keywords
Compilation complete. 4 Errors, 0 Warnings, 0 Remarks, 1757 Optimizations
One error more than in the bios version before.
Bernd
--
Bernd Zeimetz - DH4PH - Tel.: +49 (0)6151 16-4333
RechnerBetriebsGruppe Raum: S1/13 11a (alt 25/11a)
Fachbereich Informatik Technische Universitaet Darmstadt
-------------------------------------------------------
This SF.net email is sponsored by: VM Ware
With VMware you can run multiple operating systems on a single machine.
WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines
at the same time. Free trial click here:http://www.vmware.com/wl/offer/358/0