Re: [ACPI-sppt] ACPI patch
Luca Capello <[email protected]> Tue, 30 Sep 2003 00:38:21 +0100
| Newsgroups | gmane.linux.acpi.support |
|---|---|
| Message-ID | <[email protected]> |
Hello Simon, on 29/09/2003 07.02, Lindsey Simon wrote: > In my /proc/acpi/thermal_zona/THRM/temperature file I'm going up from @ > 38C at start during a compile up into the 40s. > > The trip points are > critical: 110 C > passive: 105C > active[0]: 55C Yes, mine are ===== cat /proc/acpi/thermal_zone/[...]/trip_points critical (S5): 110 C passive: 105 C: tc1=2 tc2=10 tsp=100 devices=0xdf6d8aa8 active[0]: 55 C: devices=0xdf6bcc28 > does this imply the fan will turn on at 55C? Do you have the same trip > points as me now? Does this seems like a reasonable temperature to you > for the fans to turn on? Seems like it might be a little warm but I > don't know what Intel recommends for the Centrino chips to run at. I don't know what Intel recommends, too, but I think it's a resonable temperarture for the fans to turn on. I could see the fan turned on at 55ºC compiling the kernel (I needed to compile it 2 times to have this temp) and the fan state was changed in 'on'. Even when the temperature slowed to 49ºC, the fan stayed on and then I needed to reboot because I should work :-) Thx, bye, Gismo / Luca ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf