SATA Raid for Red Hat Enterprise Linux ES 3

Anyone have a solution for getting Red Hat SATA RAID driver for Red Hat
Enterprise Linux ES 3?

   I have an Intel Motherboard D845PEBT2 with onboard SATA Raid by 
Silicon Image SiI 3112.  I installed Red Hat 9 on one drive connected to 
SATA.  Then added second drive, changed SATA to SATA RAID, and created 
mirror to second drive.  Red Hat 9 would boot from the single drive 
prior to going RAID.  After going RAID the system continued to see the 
two drives as separate but identical drives.  I also have an Adaptec 
SCSI RAID controller on the system using RAID 5, which works flawlessly.
   In trying to upgrade that system to Red Hat Enterprise Linux ES 3, 
the same thing is happening during installation.  The two drives on SATA 
are seen as separate drives instead of a single RAID Mirror.  I had 
hoped and was told that support was in that OS for Intel MB with SATA 
RAID. Evidently not for the SiI 3112 SATA RAID chipset.
   Anyone know a way to make this work?

Jared Spahn
_______________________________________________
LinuxManagers mailing list - http://www.linuxmanagers.org
submissions: LinuxManagers-35TzE1X9F6582KRnZfj+bdi2O/[email protected]
subscribe/unsubscribe: http://www.linuxmanagers.org/mailman/listinfo/linuxmanagers