iproute2 + htb

Howzit guys,

I have an interesting situation which im struggling with:

i have two service providers

eth1 : external link ( 192.168.2.2)
gw  : 192.168.2.1

eth2 : external link (196.15.188.146)
gw   : 196.15.188.145

eth0 : lan ( 192.168.200.1 ) ( MASQ)



eth1 is used to route to a network  in the 196.25.0.0/16 range ONLY and 
eth2 for normal internet traffic

i've setup routing for the diffrent links with ip rule and ip route and 
i masquerade outgoing packets on my 2 external networks

i've managed to mark packets for HTB but i need to mark for specific lan 
users eg 192.168.200.10 and put them in a shaping ratio 1:8 and im still 
struggling

as i can only mark packets leaving eth0 for the lan, the masquarding is 
a problem , i mark packets from 196.25.0.0/16 -> 192.168.200.10 with 
iptables but i cannot mark packets coming from 196.15.188.146 to 
192.168.200.10 as the ip can variable

I would really like some help on this please

Thanks

Jandre






-- 
Regards
 Jandre

		"Some people are alive only because
		 it is illegal to kill them."

_____________________________________________________
_______________________________________________
LinuxManagers mailing list - http://www.linuxmanagers.org
submissions: LinuxManagers-35TzE1X9F6582KRnZfj+bdi2O/[email protected]
subscribe/unsubscribe: http://www.linuxmanagers.org/mailman/listinfo/linuxmanagers