Re: Getting a working base system

Bernhard Rosenkraenzer wrote:


[snip]

>>I am fairly familiar with 
>>how to do this from Slackware and a couple of other distributions but
>>Ark didn't even know the drives were present when I tried to eject
>>/dev/hdb (DVD-RW) or /dev/hdd (CD-RW).
>>    
>>
>
>Try /dev/scd0 or /dev/scd1 -- RW devices are configured to use the SCSI 
>emulation layer normally.
>
>LLaP
>bero
>

Ok I tried mounting the drives with the command mount -t iso9660 
/dev/<device> /mnt/cdrom1 after creating the folder /mnt/cdrom, in place 
of <device> I tried using the following with absolutely no luck: scd0, 
scd1, sda0, cdrom, hdb. My DVD-RW drive which is the hooked up as the 
master device on the second IDE cable is an LG GSA-4120B and my CD-RW 
drive which is hooked as the slave device on the second IDE cable is a 
Plextor PX2410A, my motherboard is an ASUS P4P8X.

-- 
http://www.geocities.com/ntws01/
http://ntws01.blogspot.com/