Aurora 1.0 and v100

I'm try to run this on v100 and seems something is broken in NIC driver.

# lspci | grep Eth
00:05.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet (rev 31)
00:0c.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet (rev 31)

After prepare /etc/sysconfig/network-scripts/ifcfg-eth0 file, run
"depmod dmfe" and run "ifup eth0" on console constanly are displayed 
messages:

eth0: Tx timeout - resetting
eth0: Tx timeout - resetting

No ping to local net and from local net to this v100 network interface.

# ifconfig eth0
eth0      Link encap:Ethernet  HWaddr 00:00:00:00:00:00
           inet addr:192.168.111.210  Bcast:192.168.111.255 Mask:255.255.255.0
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:100
           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
           Interrupt:64 Base address:0x100

(in TX and RX all the time is 0)

And second:

I'm try to upgrade copy of plain 1.0 (installed on the same computer) 
using Corona packages by run in single command:

# rpm -Uvh SysVinit-2.85-34.sparc.rpm libselinux-1.19.1-6.sparc.rpm 
filesystem-2.3.0-1.sparc.rpm libsepol-1.1.1-2.sparc.rpm 
glibc-2.3.3-99.sparc.rpm rpm-4.4.1-0.12.sparc.rpm 
rpm-libs-4.4.1-0.12.sparc.rpm popt-1.10.1-0.12.sparc.rpm 
beecrypt-3.1.0-6.sparc.rpm nscd-2.3.3-99.sparc.rpm 
libgcc-3.4.2-6.fc3.sparc.rpm glibc-common-2.3.3-99.sparc.rpm 
expat-1.95.7-4.sparc.rpm rpm-python-4.4.1-0.12.sparc.rpm 
elfutils-0.96-1sparc.sparc.rpm elfutils-libelf-0.96-1sparc.sparc.rpm 
neon-0.24.7-4.sparc.rpm tzdata-2004e-2.noarch.rpm 
shadow-utils-4.0.3-37.sparc.rpm openssl-0.9.7a-40sparc.sparc.rpm 
python-2.3.4-11.sparc.rpm wget-1.9.1-17.sparc.rpm stunnel-4.05-3.sparc.rpm 
openldap-2.2.13-2.sparc.rpm openldap-clients-2.2.13-2.sparc.rpm 
autofs-4.1.3-28.sparc.rpm nss_ldap-220-3.sparc.rpm 
sendmail-8.13.1-2sparc.sparc.rpm libuser-0.52.5-1.sparc.rpm 
bind-libs-9.2.4-2.sparc.rpm bind-utils-9.2.4-2.sparc.rpm 
openssh-3.9p1-7.sparc.rpm openssh-clients-3.9p1-7.sparc.rpm 
cyrus-sasl-2.1.19-3.sparc.rpm coreutils-5.2.1-31.sparc.rpm 
tcp_wrappers-7.6-37.2.sparc.rpm setup-2.5.36-1.noarch.rpm 
db4-4.2.52-6.sparc.rpm libstdc++-3.4.2-6.fc3.sparc.rpm 
groff-1.18.1.1-3.sparc.rpm cyrus-sasl-md5-2.1.19-3.sparc.rpm 
cyrus-sasl-plain-2.1.19-3.sparc.rpm acl-2.2.23-5.sparc.rpm 
libacl-2.2.23-5.sparc.rpm attr-2.4.16-3.sparc.rpm 
libattr-2.4.16-3.sparc.rpm

Above upgrade pass without breaking dependencies but after this try run 
rpm stops with:

# rpm
rpm: symbol lookup error: /usr/lib/libneon.so.24: undefined symbol: GSS_C_NT_HOSTBASED_SERVICE

Seems neon package (neon-0.24.7-4) is broken.
(please inform me if it will be fixed).

kloczek
-- 
-----------------------------------------------------------
*Ludzie nie mają problemów, tylko sobie sami je stwarzają*
-----------------------------------------------------------
Tomasz Kłoczko, sys adm @zie.pg.gda.pl|*e-mail: [email protected]*

_______________________________________________
Aurora-sparc-devel mailing list
[email protected]
http://lists.auroralinux.org/mailman/listinfo/aurora-sparc-devel
Aurora FAQ: http://www.ecs.soton.ac.uk/~mas01r/aurorafaq.html