Re: Trying to net install 2.99 - disk not being seen

Sorry about that :(

Its an Ultra 5, 400 Mhz with a 20 GB drive, 384 MB of RAM...

In the past, if I used dhcp - it worked fine.  One thing I also noted, 
if I try a static IP, eth0 is not recognized...  I had this problem 
before with Corona and the response at that time was to use dhcp (which 
is fine by me)...

Anyway, this is more troubling in that my drive is not seen at all...

Tom "spot" Callaway wrote:
> On Tue, 2007-12-04 at 07:37 -0500, Scot P. Floess wrote:
>   
>> All:
>>
>> I am trying to do a net install for 2.99...  I chose dhcp (vs using a 
>> static ip as I had some issue with that in the past), and when it gets 
>> to the section to configure my drive...it shows now drives present.  The 
>> drive is hda - and when I reboot (meaning cancel the install), the drive 
>> is there and the machine boots...
>>     
>
> What kind of hardware?
>
> ~spot
>
>
>   

-- 
Scot P. Floess
27 Lake Royale
Louisburg, NC  27549

252-478-8087 (Home)
919-754-4592 (Work)

Chief Architect JPlate  http://sourceforge.net/projects/jplate
Chief Architect JavaPIM http://sourceforge.net/projects/javapim

_______________________________________________
Aurora-sparc-user mailing list
[email protected]
http://lists.auroralinux.org/mailman/listinfo/aurora-sparc-user
Aurora FAQ: http://www.ecs.soton.ac.uk/~mas01r/aurorafaq.html